An overview on biogas generation from anaerobic digestion of food waste

Food waste is an inevitable type of waste in every city, and its treatment technology evolves with time. Due to the high organic content and high biodegradability of food waste, anaerobic digestion becomes a commonly accepted treatment method to deal with it. This review article summarizes key factors for anaerobic digestion and provides useful information for successful anaerobic digestions. Reasonable temperature and pH are essential for a successful and productive anaerobic digestion process. A good inoculum to substrate ratio triggers a profitable food waste digestion. Good mixing and small particle sizes are important factors too. In addition, the pros and cons of different reactors to food waste digestion are highlighted. Moreover, co-digestion of food waste with animal manures, sewage sludge, and green waste were introduced.     

Review of measured concentrations of triphenyltin compounds in marine ecosystems and meta-analysis of their risks to humans and the environment

The state of scientific knowledge regarding analytical methods, environmental fate, ecotoxicity and ecological risk of triphenyltin (TPT) compounds in marine ecosystems as well as their exposure and health hazard to humans was reviewed. Since the 1960s, TPT compounds have been commonly applied as biocides for diverse industrial and agricultural purposes. For instance, they are used as active ingredients in antifouling systems on marine vessels and mariculture facilities, and as fungicides in agriculture. Due to their intensive use, contamination of coastal waters by TPT and its products of transformation has become a worldwide problem. The proportion of quantified TPT to total phenyltin compounds in the marine environment provides evidence that TPT is photodegradable in water and sediment but resistant to biotransformation. Concentrations of TPT in marine biota are consistently greater than concentrations in water and sediment, which implies potential of TPT to bioaccumulate. TPT is toxic to both marine plants and animals. The predicted no effect concentration (PNEC) for TPT, as determined by use of the species sensitivity distribution approach, is 0.64 ng L⁻¹. In some parts of the world, concentrations of TPT in seawater exceed the PNEC, indicating that TPT can pose risks to marine life. Although there is negligible risk of TPT to average human consumers, TPT has been detected in blood of Finnish people and the concentration was greater in fishermen who ate more seafood. It is, therefore, advocated to initiate regular monitoring of TPT in blood and breast milk of populations that consume greater amounts of seafood.     

Improving nutrient removal while reducing energy use at three Swiss WWTPs using advanced control

Aeration consumes about 60% of the total energy use of a wastewater treatment plant (WWTP) and therefore is a major contributor to its carbon footprint. Introducing advanced process control can help plants to reduce their carbon footprint and at the same time improve effluent quality through making available unused capacity for denitrification, if the ammonia concentration is below a certain set-point. Monitoring and control concepts are cost-saving alternatives to the extension of reactor volume. However, they also involve the risk of violation of the effluent limits due to measuring errors, unsuitable control concepts or inadequate implementation of the monitoring and control system. Dynamic simulation is a suitable tool to analyze the plant and to design tailored measuring and control systems. During this work, extensive data collection, modeling and full-scale implementation of aeration control algorithms were carried out at three conventional activated sludge plants with fixed pre-denitrification and nitrification reactor zones. Full-scale energy savings in the range of 16-20% could be achieved together with an increase of total nitrogen removal of 40%.     

Effect of freezing on photoreactivation of Escherichia coli and Enterococcus faecalis

The effect of freezing on photoreactivation of two strains of Escherichia coli (ATCC strain 25922 and O157:H7 strain 961019) and two strains of Enterococcus faecalis (strain ATCC 51299, vancomycin-resistant and strain ATCC 29212, vancomycin-sensitive) following ultraviolet irradiation were examined. The level of log photoreactivation of the freezing treated test organisms (frozen at -7, -15, or -30 degrees C then thawed at room temperature prior to ultraviolet irradiation) was compared with that of the samples that had not been frozen. Freezing had obvious impact on the response of the test organisms to visible light following ultraviolet irradiation. Significantly lower levels of photoreactivation were observed in the freezing treated cells. The effect of freezing on the ability of the test microbes to photoreactivate seems to be strain and species dependent. Overall, the experimental results suggest that less photoreactivation could be expected if freezing is used as a treatment method prior to ultraviolet disinfection.     

Carbonyl Emissions from Commercial Cooking Sources in Hong Kong

Abstract

Cooking fumes are an important carbonyl emission source, especially in a highly urbanized city, such as Hong Kong. Cooking exhaust from 15 commercial kitchens of a variety of cooking styles was sampled and analyzed for a suite of 13 carbonyl compounds. Carbonyl compositions were varied among the different cooking styles. Formal dehyde was generally the most abundant carbonyl, and its contribution to the total carbonyl amount on a molar basis ranged from 12 to 60%. Acrolein was also found to be an abundant carbonyl in the cooking exhaust. The highest contribution by acrolein to the total carbonyls was found to be 30% in the exhaust of a western-style steak restaurant. Long-chain saturated carbonyls, that is, heptanal, octanal, and nonanal, accounted for a signifi-cant fraction (>40%) of the total carbonyls in kitchens that always used heated cooking oils. Two dicarbonyls, glyoxal and methylglyoxal, had a various presence in the cooking emissions, ranging from negligible to 10%. The presence of benzaldehyde and tolualdehyde was mostly negligible in the sampled kitchen exhaust. Annual emission rates of both individual carbonyls and total carbon-yls were estimated for various types of commercial kitchens. Local-style fast-food shops contributed the highest total carbonyl emissions per year mainly because of the large number of this kind of restaurant in Hong Kong. The citywide annual emission rates of the three most toxic carbonyls, formaldehyde, acetaldehyde, and acrolein, were estimated assuming that the limited number of sampled restaurants were representative of the average restaurants. Such estimates of carbonyl emission rates were comparable to the estimated carbonyl emissions from vehicular sources, suggesting the importance of commercial cooking as a source for carbonyls in Hong Kong.     

Refinements on the age-dependent half-life model for estimating child body burdens of polychlorodibenzodioxins and dibenzofurans

We modified our prior age-dependent half-life model to characterize the range of child (ages 0-7) body burdens associated with dietary and environmental exposure to polychlorodibenzodioxins and furans (PCDD/Fs). Several exposure scenarios were evaluated. Infants were assumed to be either breast-fed or formula-fed from birth to 6 months of age. They then received intakes of PCDD/Fs through age 7 from foods based on weighted means estimates [JECFA, 2001. Joint FAO/WHO Committee on Food Additives. Fifty-seventh meeting, Rome, June 5-14 , 2001, pp. 24-40], and with or without exposures (ingestion and dermal) to urban residential soils at 1ppb TCDD toxic equivalents (TEQ). A one-compartment (adipose volume) toxicokinetic model for TCDD described by Kreuzer [Kreuzer, P.F., Csanady, Gy.A., et al., 1997. 2,3,7,8-Tetrachlorodibenzo-p-dioxin (TCDD) and congeners in infants. A toxicokinetic model of human lifetime body burden by TCDD with special emphasis on its uptake by nutrition. Arch. Toxicol. 71, 383-400] was expanded to include the key non-TCDD congeners in human breast milk and adipose tissues, and two model parameter refinements were examined: (1) use of updated and more detailed age-correlated body fat mass data [CDC, 2000. Centers for Disease Control. CDC Growth Charts: United States. Advance Data from Vital and Health Statistics of the Centers for Disease Control and Prevention, National Center for Health Statistics, Number 314, December 2000]; (2) use of breast milk PCDD/F concentration data from sampling completed in 2000-2003 [Wittsiepe, J., Fürst, P., et al., 2004. PCDD/F and dioxin-like PCB in human blood and milk from German mothers. Organohalogen Compd. 66, 2865-2872]. The updated body fat mass data nearly halved the predicted peak body burden for breast-feeding and lowered the time-weighted average (TWA) body burdens from ages 0-7 by 30-40% for breast-fed and formula-fed infants. Combined use of the updated breast milk PCDD/F concentration and body fat mass data increased the contribution of breast-feeding but reduced TWA body burdens from diet and soil. We conclude that further refinements are needed, but reliance on these better data sets for body fat mass and breast milk PCDD/F concentration significantly improves the model's ability to accurately predict body burdens during early childhood.     

An 'artificial mussel' for monitoring heavy metals in marine environments

A new chemical sampling device, artificial mussel (AM), has been developed for monitoring metals in marine environments. This device consists of a polymer ligand suspended in artificial seawater within a Perspex tubing, and enclosed with semi-permeable gel at both ends. Laboratory and field experiments were carried out to examine the uptake of five metals (Cd, Cr, Cu, Pb and Zn) by the AM. Uptake of metals by AM was proportional to the exposure metal concentrations, and the AM was able to accumulate the ASV labile fractions of metals. Uptake and release of the metals of AM are similar to those of the mussel Perna viridis, but less affected by salinity and temperature. Field studies demonstrated that the AM can not only provide a time-integrated estimate of metals concentrations, but also allows comparisons of metal levels in different environments and geographical areas beyond the natural distribution limits of biomonitors.     

Export of toxic chemicals - a review of the case of uncontrolled electronic-waste recycling

This paper reviews the concentrations of persistent organic pollutants such as flame retardants (PBDEs), dioxins/furans (PCDD/Fs), polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs) and heavy metals/metalloid concentrations of different environmental media at Guiyu, a traditional rice-growing village located in southeastern Guangdong Province (PR China), which has turned into an intensive electronic-waste (e-waste) recycling site. Incomplete combustion of e-waste in open air and dumping of processed materials are the major sources of various toxic chemicals. By comparing with existing data available in other areas and also guidelines adopted in different countries, it is obvious that the environment is highly contaminated by these toxic chemicals derived from the recycling processes. For example, the monthly concentration of the sum of 22 PBDE congeners contained in PM(2.5) (16.8ngm(-3)) of air samples at Guiyu was 100 times higher than published data. In order to safeguard the environment and human health, detailed investigations are urgently needed, especially on tracking the exposure pathways of different toxic chemicals which may affect the workers and local residents especially mothers, infants and children.     

Phosphate complexation model and its implications for chemical phosphorus removal

A phosphate complexation model is developed, in an attempt to understand the mechanistic basis of chemically mediated phosphate removal. The model presented here is based on geochemical reaction modeling techniques and uses known surface reactions possible on hydrous ferric oxide (HFO). The types of surface reactions and their reaction stoichiometry and binding energies (logK values) are taken from literature models of phosphate interactions with iron oxides. The most important modeling parameter is the proportionality of converting moles of precipitated HFO to reactive site density. For well-mixed systems and phosphate exposed to ferric chloride during HFO precipitation, there is a phosphate capacity of 1.18 phosphate ions per iron atom. In poorly mixed systems with phosphate exposed to iron after HFO formation, the capacity decreased to 25% of the well-mixed value. The same surface complexation model can describe multiple data sets, by varying only a single parameter proportional to the availability of reactive oxygen functional groups. This reflects the unavailability of reactive oxygen groups to bind phosphate. Electron microscope images and dye adsorption experiments demonstrate changes in reactive surface area with aging of HFO particles. Engineering implications of the model/mechanism are highlighted.     

整全,互动和可持续的EIA：香港上水屠宰场的例案研究

以香港上水屠宰场的ＥＩＡ为例,阐述了ＥＩＡ过程须结合“清洁工艺”、“环境管理系统”、“持续生的本底监测”和“开放的公众咨询”四个重要单元,互动灵活,以增强环保效益、省时及经济。传统的ＥＩＡ较为被动,如果项目“倡议人”缺乏环保意识,就会妨碍了它的实质功能。通行的末期性公众咨询,很容易激发冲突,与西方冗长的公众参与同样妨碍进度。文章探讨互动式ＥＩＡ的优点,论证它对改善环评工序和可持续发展的重要性。