Exploring the linkages between river water chemistry and watershed characteristics using GIS-based catchment and locality analyses

A typology of land characteristics for the Humber catchment in central/eastern England is identified in relation to land use, hydrology and demographic, topographic and geological characteristics, using GIS and statistical analyses. Empirical relationships between land characteristics and water quality were examined in relation to the spatial variability in water quality across the Humber catchment. Analyses of relationships between land characteristics and water quality were undertaken at two hierarchical scales: (1) individual catchments and (2) localities of 10 km radius draining to each sampling site. The importance of urban and agricultural sources was identified, together with a hydrological component linked to dilution of point source inputs and mobilisation of specific sediment-associated contaminants in higher-energy (higher-flow) environments. High-solubility (dissolved) chemical determinands (such as B, Cl and SO₄), which undergo conservative transport through the river network, show the strongest linkages with land characteristics at the catchment scale. Cr, Zn and Ca show stronger correlations with land characteristics at the locality rather than the catchment scale, indicating that the concentrations of these determinands are more closely linked to the availability of localised sources. This work provides a starting point for investigating how changes in land use and management of drainage basins might impact river water quality at the regional scale and fluxes to the coastal zone, by providing a mechanism for examining linkages between regional-scale land characteristics and river water quality. The next step requires development of the approach within a more rigorous statistical framework and the extension of the regional analysis within a wider national and international context. Electronic Publication     

Impact of calcium and magnesium on growth and morphological acclimations of Nitella: implications for calcification and nutrient dynamics

The impact of calcium (Ca) and magnesium (Mg) on the growth and morphology of a Charophyte, Nitella pseudoflabellata, and the influence of Mg on calcification and phosphorous (P) speciation were studied in laboratory experiments for variable concentrations (≤q120 mg · L^?1) of Ca and Mg. It was clearly identified that Mg aided shoot elongation. An increase in Ca concentrations produced intensified shoot elongation also, but at a lesser rate than the equivalent levels of Mg. Depending on the availability of Ca and Mg, the morphological appearance differed significantly, suggesting significant levels of ecoplasticity. Furthermore, Mg was observed to produce less calcite encrustation. Plant P-speciation suggested a higher Mg concentration corresponding to a more water-soluble and less carbonate-bound P fraction. This indicates that upon senescence and decomposition, a large fraction of P is supplied to the water column; ultimately behaving similar to a typical vascular plant.     

Morphological plasticity of submerged macrophyte Potamogeton wrightii Morong under different photoperiods and nutrient conditions

The morphological plasticity of the submerged macrophyte Potamogeton wrightii under different nutrient conditions and photoperiods was measured in a laboratory controlled experiment for 70 days in Japan. Six treatments were used in this experiment (3 × 2 factorial design with three replications) which consisted of three photoperiods and two nutrient conditions. Both photoperiod and nutrient condition had a pronounced effect on shoot and leaf morphology in P. wrightii. New shoot recruitment, and the length of main and new shoots gradually decreased with shortening photoperiod under both nutrient treatments. Plants under an 8 h photoperiod and high nutrient levels generated significantly more dead leaves (7.42 leaf·shoot^?1) and decomposed shoots (1.3 shoots·pot^?1) than plants under other treatments. Under short photoperiods (12 and 8 h) plants failed to produce flowering spikes in both nutrient conditions. In high nutrient conditions, P. wrightii produced shorter shoots, fewer leaves with shorter and narrower laminas, and smaller petioles compared with plants in the low nutrient condition. This may be adaptive under high nutrient conditions because it lowers foliar uptake and, thus, nutrient toxicity.     

Pollution distribution of heavy metals in surface soil at an informal electronic-waste recycling site

We studied distribution of heavy metals [lead (Pb), copper (Cu) and zinc (Zn)] in surface soil at an electronic-waste (e-waste) recycling workshop near Metro Manila in the Philippines to evaluate the pollution size (spot size, small area or the entire workshop), as well as to assess heavy metal transport into the surrounding soil environment. On-site length-of-stride-scale (~70 cm) measurements were performed at each surface soil point using field-portable X-ray fluorescence (FP-XRF). The surface soil at the e-waste recycling workshop was polluted with Cu, Zn and Pb, which were distributed discretely in surface soil. The site was divided into five areas based on the distance from an entrance gate (y-axis) of the e-waste recycling workshop. The three heavy metals showed similar concentration gradients in the y-axis direction. Zn, Pb and Cu concentrations were estimated to decrease to half of their maximum concentrations at ~3, 7 and 7 m from the pollution spot, respectively, inside the informal e-waste recycling workshop. Distance from an entrance may play an important role in heavy metal transport at the soil surface. Using on-site FP-XRF, we evaluated the metal ratio to characterise pollution features of the solid surface. Variability analysis of heavy metals revealed vanishing surficial autocorrelation over metre ranges. Also, the possibility of concentration prediction at unmeasured points using geostatistical kriging was evaluated, and heavy metals had a relative “small” pollution scales and remained inside the original workshop compared with toxic organohalogen compounds. Thus, exposure to heavy metals may directly influence the health of e-waste workers at the original site rather than the surrounding habitat and environmental media.     

Occurrence of estrogenic endocrine disrupting chemicals concern in sewage plant effluent

The purpose of this study was to give a worldwide overview of the concentrations of typical estrogenic endocrine disrupting chemicals （EDCs） in the effluent of sewage plants and then compare the concentra- tion distribution of the estrogenic EDCs in ten countries based on the survey data of the estrogenic EDCs research. The concentrations of three main categories （totally eight kinds） of estrogenic EDCs including steroidal estrogens （estrone （El）, estradiol （E2）, estriol （E3） and 17a- ethynylestradiol （EE2））, phenolic compounds （nonylphe- nol （NP） and bisphenol A （BPA）） and phthalate esters （dibutyl phthalate （DBP） and dibutyl phthalate （2- ethylhexyl） phthalate （DEHP）） in the effluents of sewage plants reported in major international journals over the past decade were collected. The statistics showed that the concentration distributions of eight kinds of EDCs were in the range of ng·L^-1 to μg·L^-1. The concentrations of steroidal estrogens mainly ranged within 50.00 ng. L-1, and the median concentrations of El, E2, E3 and EE2 were 11.00, 3.68, 4.90 and 1.00 ng·L^-1, respectively. Phenolic compounds and phthalate esters were found at pg. L-1 level （some individual values were at the high level of 40.00 μg·L^-1）. The median concentrations of BPA, NP, DBP and DEHP were 0.06, 0.55, 0.07 and 0.88 μg·L^-1, respectively. The concentrations of phenolic compounds and phthalate esters in the effluents were higher than that of steroids estrogens. The analysis of the concentration in various ten countries showed that steroids estrogens, phenolic compounds and phthalate esters in sewage plant effluents were detected with high concentration in Canada, Spain and China, respectively.     

Japanese Papilio butterflies puddle using Na+ detected by contact chemosensilla in the proboscis

Many butterflies acquire nutrients from non-nectar sources such as puddles. To better understand how male Papilio butterflies identify suitable sites for puddling, we used behavioral and electrophysiological methods to examine the responses of Japanese Papilio butterflies to Na⁺, K⁺, Ca²⁺, and Mg²⁺. Based on behavioral analyses, these butterflies preferred a 10-mM Na⁺ solution to K⁺, Ca²⁺, and Mg²⁺ solutions of the same concentration and among a tested range of 1?mM to 1?M NaCl. We also measured the ion concentrations of solutions sampled from puddling sites in the field. Na⁺ concentrations of the samples were up to 6?mM, slightly lower than that preferred by butterflies in the behavioral experiments. Butterflies that sipped the 10?mM Na⁺ solution from the experimental trays did not continue to puddle on the ground. Additionally, butterflies puddled at sites where the concentrations of K⁺, Ca²⁺, and/or Mg²⁺ were higher than that of Na⁺. This suggests that K⁺, Ca²⁺, and Mg²⁺ do not interfere with the detection of Na⁺ by the Papilio butterfly. Using an electrophysiological method, tip recordings, receptor neurons in contact chemosensilla inside the proboscis evoked regularly firing impulses to 1, 10, and 100?mM NaCl solutions but not to CaCl₂ or MgCl₂. The dose?Cresponse patterns to the NaCl solutions were different among the neurons, which were classified into three types. These results showed that Japanese Papilio butterflies puddle using Na⁺ detected by the contact chemosensilla in the proboscis, which measure its concentration.     

Comparison of conventional and inverted A2/O processes: Phosphorus release and uptake behaviors

Two full-scale systems operated in parallel, a conventional A²/O system consisting of anaerobic, anoxic and oxic compartments in succession and an inverted system consisting of anoxic, anaerobic and oxic compartments without internal recycle, were compared in terms of their phosphorus removal performance, with an emphasis on phosphate (P) release behaviors, using both operational data and simulation results. The inverted system exhibited better long-term phosphorus removal performance (0.2 ± 0.3 vs. 0.7 ± 0.7 mg/L), which should be attributed to the higher P release rate (0.79 vs. 0.60 kg P/(kg MLSS·day)) in the non-aerated compartments. The P release occurred in both the anoxic and anaerobic compartments of the inverted system, resulting in more efficient P release. Although the abundances of the ‘Candidatus Accumulibacter phosphatis' population in the two systems were quite similar ((19.1 ± 3.27)% and (18.4 ± 4.15)% of the total microbe (DAPI stained particles) population in the inverted and conventional systems, respectively, by fluorescence in situ hybridization (FISH)), the high-concentration DAPI staining results show that the abundances of the whole polyphosphate accumulating organisms (PAOs) in the aerobic ends were quite different (the average ratios of the poly-P granules to total microbes (DAPI stained particles) were (45 ± 4.18)% and (35 ± 5.39)%, respectively). Both the operational data and simulation results showed that the inverted system retained more abundant PAO populations due to its special configuration, which permitted efficient P release in the non-aerated compartment and better P removal.     

Control of electrostatic charge for powder by using feedback control-type ionizer system

As a method to prevent or mitigate cone discharges in a specific section such as a large silo, we have developed a new feedback control-type ionizer system. The feedback control-type system is composed mainly of an ionizer, an electrostatic field strength meter, and computer control equipment. In this study, we evaluated experimentally the practical version of the feedback control-type ionizer system through several tests in a pneumatic powder transport facility. The specific charges of the falling pellets in the silo were also measured for 10 s using a Faraday cage. Polypropylene (PP) pellets with a mean particle size of 3 mm were used in this experiment. The results of the experiment revealed that the feedback control-type ionizer system had the following characteristics: (1) it is possible to control the performance of the ionizer with a supply current; (2) the electrostatic field strength in the loading pipe from the charged powder is reduced and maintained at near zero by using the feedback control-type system; and (3) the performance of the feedback control-type system is superior to that of others, such as the conventional AC- or DC-type ionizers.