Position-controlled III-V compound semiconductor nanowire solar cells by selective-area metal-organic vapor phase epitaxy

We demonstrate position-controlled III-V semiconductor nanowires (NWs) by using selective-area metal-organic vapor phase epitaxy and their application to solar cells. Efficiency of 4.23% is achieved for InP core-shell NW solar cells. We form a 'flexible NW array' without a substrate, which has the advantage of saving natural resources over conventional thin film photovoltaic devices. Four junction NW solar cells with over 50% efficiency are proposed and discussed.     

Position-Controlled III–V Compound Semiconductor Nanowire Solar Cells by Selective-Area Metal–Organic Vapor Phase Epitaxy

We demonstrate position-controlled III–V semiconductor nanowires (NWs) by using selective-area metal–organic vapor phase epitaxy and their application to solar cells. Efficiency of 4.23% is achieved for InP core–shell NW solar cells. We form a ‘flexible NW array’ without a substrate, which has the advantage of saving natural resources over conventional thin film photovoltaic devices. Four junction NW solar cells with over 50% efficiency are proposed and discussed.     

Accumulation properties of polychlorinated biphenyl congeners in Yusho patients and prediction of their cytochrome P450-dependent metabolism by in silico analysis

In what has become known as the Yusho incident, thousands of people in western Japan were poisoned by the accidental ingestion of rice bran oil contaminated with polychlorinated biphenyls (PCBs) and various dioxins and dioxin-like compounds. In this study, we investigated the accumulation patterns of 69 PCB congeners in the blood of Yusho patients in comparison with those of non-exposed controls. The blood samples were collected at medical check-ups in 2004 and 2005. To compare the patterns of PCB congeners, we calculated the concentration ratio of each congener relative to the 2,2′,4,4′,5,5′-hexaCB (CB153) concentration. The concentration ratios of tetra- and penta-chlorinated congeners in the blood of Yusho patients were significantly lower than those of controls. To examine the cytochrome P450 (CYP)-dependent metabolic potential of the 2,3′,4,4′5-pentaCB (CB118), CB153, and 2,3,3′,4,4′5-hexaCB (CB156) congeners, we conducted PCB-CYP (CYP1A1, CYP1A2, CYP2A6, and CYP2B6) docking simulation by in silico analysis. The docking models showed that human CYP1A1, CYP2A6, and CYP2B6 isozymes have the potential to metabolize CB118 and CB153. On the other hand, it was inferred that CB156 is difficult to be metabolized by these four CYP isozymes. These results indicate that CYP1 and CYP2 isozymes may be involved in the characteristic accumulation patterns of PCB congeners in the blood of Yusho patients.     

Analysis method for PCBs in reclaimed oil using a fast-GC triple stage quadrupole mass spectrometer with the 13-component quantitation method

It is necessary for companies supplying reclaimed oil to analyze polychlorinated biphenyls (PCBs), because there is a possibility of the presence of contaminants due to trace-level PCBs in the reclaimed oil. However, common analysis methods of PCBs are time-consuming and complicated. Fast-GC triple stage quadrupole mass spectrometer with the 13-component quantitation method is an official method for analyzing PCBs in insulating oil in Japan. This method is extremely fast and simplified. The purpose of this study involves an investigation of the aforementioned fast and simple method for potential use in the analysis of reclaimed oil. Furthermore, it was attempted to combine the method with sample preparation involving only hexane dilution. The effect of sample dilutions corresponding to 100, 300, and 500 times was evaluated for reducing the matrix effect. The matrix effect was suppressed at a dilution ratio equal to or exceeding 300 times. Calibration curves of four points, namely 0.01, 0.05, 0.1, and 0.5 ng/mL, (ignored origin) by using an internal standard method were prepared for the 13 components. The square of regression coefficient (R²) values of all calibration curves exceeded 0.997. This method was adopted for the analysis of reclaimed oil containing 0.5 μg/mL PCBs, which corresponds to the judgment criteria, and accurate quantitation (accuracy value, 94.0–102%) and good repeatability (%RSD, 3.6%) were obtained. Furthermore, the required sensitivity was maintained even when 800 samples were analyzed without a cleaning ion source and an exchanging analysis column.     

Variability and reliability of POP concentrations in multiple breast milk samples collected from the same mothers

Risk assessment of infant using a realistic persistent organic pollutant (POP) exposure through breast milk is essential to devise future regulation of POPs. However, recent investigations have demonstrated that POP levels in breast milk collected from the same mother showed a wide range of variation daily and monthly. To estimate the appropriate sample size of breast milk from the same mother to obtain reliable POP concentrations, breast milk samples were collected from five mothers living in Japan from 2006 to 2012. Milk samples from each mother were collected 3 to 6 times a day through 3 to 7 days consecutively. Food samples as the duplicated method were collected from two mothers during the period of breast milk sample collection. Those were employed for POP (PCBs, DDTs, chlordanes, and HCB) analysis. PCB concentrations detected in breast milk samples showed a wide range of variation which was maximum 63 and 60% of relative standard deviation (RSD) in lipid and wet weight basis, respectively. The time course trend of those variations among the mothers did not show any typical pattern. A larger amount of PCB intake through food seemed to affect 10 h after those concentrations in breast milk in lipid weight basis. Intraclass correlation coefficient (ICC) analyses indicated that the appropriate sample size for good reproducibility of POP concentrations in breast milk required at least two samples for lipid and wet weight basis.     

Distribution of inorganic bromine and metals during co-combustion of polycarbonate (BrPC) and high-impact polystyrene (BrHIPS) wastes containing brominated flame retardants (BFRs) with metallurgical dust

This study focused on the thermal degradation of polycarbonate (BrPC) and high-impact polystyrene (BrHIPS), containing different brominated flame retardants. The evolved inorganic bromine was utilized for the separation of metals present in electric arc furnace dust (EAFD). The thermal degradation of BrPC generated inorganic gaseous HBr (69%) and condensable Br₂ (31%). The bromine evolved from BrHIPS was detected almost entirely in a condensed phase as SbBr₃. When mixed with EAFD, the evolved inorganic bromine reacted immediately with the metallic components of zinc and lead, but not with iron. The best bromination efficiencies were obtained during the isothermal heating (80 min at 550 °C) of the mixtures at mass ratios of 6:1 and 9:1 w/w under oxidizing conditions. The achieved brominating rates reached 78 and 81% for zinc and 90 and 94% for lead in 6:1 and 9:1 BrPC:EAFD, respectively, and 47 and 65% for zinc and 67 and 63% for lead in 6:1 and 9:1 BrHIPS:EAFD, respectively. The oxidizing condition favored complete vaporization of the formed bromides.     

The dynamics of mercury around an artisanal and small-scale gold mining area,Camarines Norte,Philippines

Environmental Science and Pollution Research - To elucidate the dynamics of mercury emitted and released by artisanal and small-scale gold mining (ASGM) activity and to estimate its impact on the...     

Tracer transport model at Japan meteorological agency and its application to the ETEX data

This paper describes the JMA tracer transport model and its sensitivity to model physics and initial conditions by using the ETEX data. Compared with observations, the model overestimates ground-level concentration in the early stage within about one day from the emission, possibly due to underestimation of vertical diffusion. In the early stage, the enhanced vertical diffusion effectively transports the tracer upward and decreases the ground-level concentration, while in the later stage, it enhances downward transports from the upper layer and increases the ground-level concentration. A conceptual model is given for understanding the vertical transport due to vertical diffusion. The horizontal diffusion introduced to the model has preferable impacts on forecasts especially in the early stage. Finally, we discuss the predictability of this model based on sensitivity to initial conditions of emission time and height.     

Concentration and distribution of dioxins and related compounds in human tissues

Polychlorinated dibenzo-p-dioxin, polychlorinated dibenzofuran and dioxin-like polychlorinated biphenyl concentrations in human blood, lung, liver, bile, pancreas, spleen, kidney and mesentery fat were determined to assess the concentrations and distribution of these chemicals in human tissues from 20 donors. The mean TEQ concentrations in blood, lung, liver, bile, spleen, pancreas, kidney and mesentery fat were 119, 178, 228, 50, 113, 163, 138 and 139 pg TEQ/g lipid, respectively. Parallel levels were seen in the blood, spleen, kidney and mesentery fat; in the lungs and pancreas, the levels were somewhat higher. Among the organ tissues samples, the highest concentration was observed in the liver and the lowest in the bile. Mean total-TEQ concentration of the liver was about 4.5 times higher than that of bile. Positive correlations were observed among the concentrations of dioxins in various tissues. However, the concentrations in bile were not correlated with any tissues. It is suggested that the distribution behavior of dioxin-like congeners in human tissues varies among tissues and the kinds of congeners ingested. To evaluate the relationship between the accumulation levels of dioxins and their pathophysiological significance or risk, data must be accumulated from a more extensive group of human samples.