The stability of butyltin compounds in a dredged heavily-contaminated sediment

A treatment process for marine sediment heavily contaminated with tributyltin (TBT) was designed that included dehydrating, sunlight drying and dumping processes. The time course in butyltin (BTs) compounds, TBT, dibutyltin (DBT) and monobutyltin concentrations were investigated in the sediment treated under various conditions (light (UV, sunlight and light exclusion), moisture (air-drying and water saturation) and wetting and drying cycles). Significant changes in all the BT compound concentrations with time were not found regardless of the sediment conditions for light and moisture. The results indicated the high stabilities of TBT and DBT in the sediments versus light and moisture condition changes, probably taking place in the treatment process. It is also estimated that the BTs in the sediment are resistant to photo-degradation and biochemical degradation and their half lives are relatively long. In contrast, the decreases in the TBT and DBT were observed during the wetting and drying cycle treatment for the water saturated sediment both during exposure to sunlight and under a dark condition. This result suggested the hypothesis that the TBT degradation could be accelerated by the high microbial activity induced by the moisture changing treatments.     

Exposure assessment for trace elements from consumption of marine fish in Southeast Asia

Concentrations of 20 trace elements were determined in muscle and liver of 34 species of marine fish collected from coastal areas of Cambodia, Indonesia, Malaysia and Thailand. Large regional difference was observed in the levels of trace elements in liver of one fish family (Carangidae): the highest mean concentration was observed in fish from the Malaysian coastal waters for V, Cr, Zn, Pb and Bi and those from the Java Sea side of Indonesia for Sn and Hg. To assess the health risk to the Southeast Asian populations from consumption of fish, intake rates of trace elements were estimated. Some marine fish showed Hg levels higher than the guideline values by U.S. Environmental Protection Agency and Joint FAO/WHO Expert Committee on Food Additives (JECFA). This suggests that consumption of these fish may be hazardous to the people.     

Remediation of cadmium-contaminated paddy soils by washing with calcium chloride: verification of on-site washing

We developed a new, three-step soil-wash method to remediate Cd-contaminated paddy fields. The method comprises (1) chemically washing the field soil with a CaCl2 solution; (2) washing the treated soil with water to eliminate residual Cd and CaCl2; and (3) on-site treatment of wastewater using a portable wastewater treatment system. Cd concentrations in the treated water were below Japan's environmental quality standard (0.01 mg Cd L-1), and the removal of Cd from the exchangeable fraction was 55% and from the acid-soluble fraction 15%. While soil fertility properties were affected by the soil washing, adverse effects were not crucial and could be corrected. The washing had no affect on rice growth, and reduced the average Cd concentration in rice grains by about two-thirds compared to a control plot. These results confirmed the effectiveness of the soil-wash method in remediating Cd-contaminated paddy fields.     

Mercury and its relation with selenium in the liver of Dall's porpoises (Phocoenoides dalli) off the Sanriku coast of Japan

Liver samples of 22 Dall's porpoises (Phocoenoides dalli) collected off the Sanriku coast of Japan were analyzed for investigation on bioaccumulation of total mercury (SigmaHg), organic mercury (OrgHg), inorganic mercury (InHg) and selenium (Se). In the liver, detoxification of Hg was evident by transformation of OrgHg. Se showed different Hg detoxification patterns in the liver with a threshold range of hepatic SigmaHg concentration of about 20-30 microg/g dry weight. The molar ratios of Se/InHg or Se/SigmaHg were obviously higher than 1 when hepatic SigmaHg levels were less than the range, while both ratios were close to 1 when SigmaHg levels were higher than the threshold, suggesting a mechanism by detoxification of OrgHg into less toxic mercuric selenide (HgSe) forms in the latter.     

Development of a testing method for asbestos fibers in treated materials of asbestos containing wastes by transmission electron microscopy

Appropriate treatment of asbestos-containing wastes is a significant problem. In Japan, the inertization of asbestos-containing wastes based on new treatment processes approved by the Minister of the Environment is promoted. A highly sensitive method for testing asbestos fibers in inertized materials is required so that these processes can be approved. We developed a method in which fibers from milled treated materials are extracted in water by shaking, and are counted and identified by transmission electron microscopy. Evaluation of this method by using asbestos standards and simulated slag samples confirmed that the quantitation limits are a few million fibers per gram and a few μg/g in a sample of 50 mg per filter. We used this method to assay asbestos fibers in slag samples produced by high-temperature melting of asbestos-containing wastes. Fiber concentrations were below the quantitation limit in all samples, and total fiber concentrations were determined as 47–170 × 10^?6 f/g. Because the evaluation of treated materials by TEM is difficult owing to the limited amount of sample observable, this testing method should be used in conjunction with bulk analytical methods for sure evaluation of treated materials.     

Source-specific sewage pollution detection in urban river waters using pharmaceuticals and personal care products as molecular indicators

Environmental Science and Pollution Research - Source-specific elucidation of domestic sewage pollution caused by various effluent sources in an urban river water, as conducted for this study,...     

A struggle for distributive fairness in waste disposal: Koto Ward and In-Ward Waste Disposal in the 23 wards of Tokyo

This study explores the politics of distributive fairness in Locally-Unwanted-Land-Uses (LULUs) siting by looking into how a movement in LULU disputes changes its attitude towards a frame of distributive fairness over a long period of time. Some kinds of facilities are often opposed by local residents because of negative side-effects, even as they are claimed to be necessary for the well-being of the wider public. Framing refers to actors’ signifying work, and how to frame distributive fairness plays a significant role in conflicts over such controversial land uses. In the 23 wards of Tokyo, distributive fairness in waste disposal among the wards has been a crucial issue. In the early 1970s, Koto Ward, which suffered a disproportionate burden of waste disposal, launched a campaign to rectify the unfairness. In-Ward Waste Disposal (IWWD), a frame of distributive fairness, played a central role in this movement. However, Koto Ward’s attitude towards this frame of distributive fairness changed over time. By examining why Koto Ward’s advocacy for IWWD varied over time, this study shows how Koto Ward’s stance on IWWD changed in conjunction with economic, policy, and political circumstances, thereby illuminating the importance of integrating socio-politico-economic contexts in framing analysis.     

Bacterial community structure analysis of sediment in the Sagami River, Japan using a rapid approach based on two-dimensional DNA gel electrophoresis mapping with selective primer pairs

A rapid approach based on two-dimensional DNA gel electrophroesis (2-DGE) mapping with selective primer pairs was employed to analyze bacterial community structure in sediments from upstream, midstream and downstream of Sagami River in Japan. The 2-DGE maps indicated that Alpha- and Delta-proteobacteria were major bacterial populations in the upstream and midstream sediments. Further bacterial community structure analysis showed that richness proportion of Alpha- and Delta-proteobacterial groups reflected a trend toward decreasing from the upstream to downstream sediments. The biomass proportion of bacterial populations in the midstream sediment showed a significantly difference from that in the other sediments, suggesting that there may be an environmental pressure on the midstream bacterial community. Lorenz curves, together with Gini coefficients were successfully applied to the 2-DGE mapping data for resolving evenness of bacterial populations, and showed that the plotted curve from high-resolution 2-DGE mapping became less linear and more an exponential function than that of the 1-DGE methods such as chain length analysis and denaturing gradient gel electrophoresis, suggesting that the 2-DGE mapping may achieve a more detailed evaluation of bacterial community. In conclusion, the 2-DGE mapping combined with the selective primer pairs enables bacterial community structure analysis in river sediment and thus it can also monitor sediment pollution based on the change of bacterial community structure.     

Micro fabrication on cylinder surface for control of wettability

A micro fabrication is presented to control wettability on cylinder surfaces. A machine tool is developed to form the micro-scale structure on the cylinder in incremental stamping. The stamping tool is manufactured with fabricating the micro-scale structure on the top of the tool in FIB sputtering. The micro incremental stamping is repeated with linear motion of the tool and rotation of the workpiece. The rotation is controlled by the friction drive on the machine table because of the stable stamping with reducing bending of the workpiece. The critical stamping depth, the minimum depth in which the structure is formed, is determined in the forming tests using the structured tool. Then, a stripe type structure is formed to control wettability on the cylinder surface. Anisotropic wettability appears on the structured surface.