Congener-specific analysis of non-dioxin-like polychlorinated biphenyls in blood collected from 195 pregnant women in Sapporo City, Japan

We conducted a congener-specific analysis of non-dioxin-like polychlorinated biphenyls (non-dioxin-like PCBs) in blood collected between July 2002 and July 2004 from 195 pregnant women living in Sapporo City of Hokkaido Prefecture, Japan. The present study is one of the few studies in which full congener concentrations of non-dioxin-like PCBs have been measured in the blood of pregnant women. Of the 195 pregnant women, 101 were primipara (mean: 28.8 years, median: 28.0 years) and 94 were multipara (mean: 32.3 years, median: 33.0 years). Among the 197 non-dioxin-like PCB congeners, 58 congeners were identified in the blood of pregnant women. The arithmetic mean total concentrations of 58 non-dioxin-like PCB congeners in the blood of primiparous and multiparous mothers in Sapporo City were 42.2-329.3 (mean: 114.5, median: 98.6) and 31.5-258.0 (mean: 100.3, median: 91.4)ngg(-1)lipid, respectively. The results show that the contamination of non-dioxin-like PCBs in the blood of women has decreased compared to past levels in other domestic areas, in which the subject age was similar to that in this study. The results of the present study indicate that current levels of non-dioxin-like PCBs in the blood of Japanese women and can be used as baseline data for future temporal trends. The sums of the ratios of the concentrations of hexaCBs and heptaCBs to the total concentrations of 58 non-dioxin-like PCB congeners in the blood of primiparous and multiparous mothers were 78.5% and 77.7%, respectively. The hexaCBs ratios in the blood of primiparous and multiparous mothers were 45.4% and 44.7%, respectively. HexaCB-153 among hexaCBs congeners, the most abundant congener in the blood of primiparous and multiparous mothers, contributed approximately 22.0% and 21.8% to the total concentrations of 58 non-dioxin-like PCBs congeners that were measured in the blood, respectively. Among the non-dioxin-like PCB congeners measured in the present study, hexaCB-138, heptaCB-170, heptaCB-180, and heptaCB-182/heptaCB-187 also showed high ratios to total concentrations of 58 non-dioxin-like PCB congeners detected in the blood of primiparous and multiparous mothers. With regard to the relationship between the total concentrations of 58 non-dioxin-like PCB congeners in maternal blood and the number of deliveries or the age of primiparous and multifarious mothers, the total levels of these PCB congeners tended to decreases with increases in the number of deliveries and significantly increased with increasing maternal age in both groups. Furthermore, significant correlations were observed between the total concentrations of these PCB congeners in blood and the age of primiparae and multiparae. The concentrations of hexaCB-153 in the blood of primiparous and multiparous mothers showed a close correlation to the total concentrations of these PCBs, suggesting that hexaCB-153 could be an indicator of total concentrations of non-dioxin-like PCB congeners in the blood of pregnant women.     

Effects of different mobilities of leaf and woody litters on litter carbon dynamics in arid ecosystems in Western Australia

Afforestation of arid land is a promising countermeasure against global warming. We had previously found, through modeling and mass balance analyses of an arid land afforestation experimental project in Western Australia, that a significant amount of litter could have been physically removed from the floors of natural forests. In order to analyze litter carbon dynamics in depth, we investigated the actual mobility of litter in several natural forests in Sturt Meadows in an arid region of Western Australia, and estimated the difference between the removal rate of leaf and woody (twigs and branches) litter on the forest floor. Then we redeveloped a litter carbon dynamics model by incorporating physical removal of litter to show the different mobilities of leaf and woody litters. We also analyzed carbon balances and the effect of differential litter mobility on litter carbon dynamics. Except for twigs in one plot in a high density forest, 29–100% of leaf litter and 10–100% of woody litter was removed annually, demonstrating the physical removal of litter in these natural forests. The main cause of litter removal was wind, not flooding. Decreases in leaf and woody litters could be approximated as first order decay functions in most plots; first order decay or disappearance rate constants were then determined. Estimated disappearance rate constants of leaf and woody litter ranged from 0.19 to 11 and 0.11–12 year⁻¹, respectively; most of the constants ranged from 0.19 to 2.0 and 0.11–0.74 year⁻¹, respectively. Based on the disappearance rate constant, the mobility of woody litter was estimated to be roughly 20% that of leaf litter, confirming that climatic factors move leaves more easily than twigs. The improved model, which took into account the different mobilities of leaf and woody litters, showed that annual physical removal of litter reached 70–82% of the annual litter fall in Acacia aneura forests, and that roughly 40–60% of the existing litter was removed annually from all sites. Incorporating into the model the difference in mobilities of leaf and woody litters showed that the ratio of annual litter removal to annual litter fall increased about 10% points compared with the assumption of that both litter types had equal mobility.     

Recycling process for yttria-stabilized tetragonal zirconia ceramics using a hydrothermal treatment

The recycling process for 3 mol% yttria-stabilized tetragonal zirconia polycrystals (3Y-TZP) sintered at 1450°–1550°C was examined by applying low-temperature degradation of zirconia ceramics under hydrothermal conditions. Hydrothermal treatment at a temperature from 200° to 240°C can lead to the spontaneous disintegration of 3Y-TZP sintered bodies into powdery particles. The hydrothermally obtained zirconia powder was found to consist of primary particles and aggregated particles. Detailed X-ray diffraction measurement revealed the formation of a cubic zirconia phase in the 3Y-TZP sintered bodies, which seemed to inhibit the disintegration of aggregated particles toward the primary particle level. The reclaimed 3Y-TZP powder was sintered again through a conventional powder processing route. The mechanical properties and microstructure of recycled 3Y-TZP sintered specimens were examined by comparison with those of the original 3Y-TZP sintered bodies. Dense recycled 3Y-TZP sintered at a higher temperature exhibited higher fracture toughness to some degree than the original 3Y-TZP.     

Improved method for the formation of recycled resins from depolymerized products of waste fiber-reinforced plastics: simple and effective purification of recovered monomers by washing with water

The synthesis of recycled plastics from recovered monomeric materials obtained from the depolymerization reaction of fiber-reinforced plastics (FRP) was examined. The depolymerization reaction of FRP in the presence of N,N-dimethylaminopyridine (DMAP) smoothly yielded the corresponding monomers, which mainly consisted of dimethyl phthalates. The polymerization reaction with this monomer failed to form the corresponding unsaturated polyesters due to contamination by N-methyl-4-pyridone, a decomposition product of DMAP. An efficient purification of the recovered monomer was achieved by washing with water, and the purified monomer successfully yielded the corresponding polymers. A hardness test revealed that the polymers were as hard as the polyester made from virgin materials. The present modification provides a practical method for the preparation of recycled plastics from depolymerized plastics.     

A game model for dominance relations among group-living animals

We present here an attempt to understand behaviors of dominant individuals and of subordinate individuals as behavior strategies in an asymmetric “hawk-dove” game. We assume that contestants have perfect information about relative fighting ability and the value of the resource. Any type of asymmetry, both relevant to and irrelevant to the fighting ability, can be considered. It is concluded that evolutionarily stable strategies (ESSs) depend on the resource value (V), the cost of injury (D), and the probability that the individual in one role will win (x). Different ESSs can exist even when values of V, D, and x are the same. The characteristics of dominance relations detected by observers may result from the ESSs that the individuals are adopting. The model explains some characteristics of dominance relations, for example, the consistent outcome of contests, the rare occurrence of escalated fights, and the discrepancy between resource holding potential (RHP) and dominance relations, from the viewpoint of individual selection. Received: 7 May 1997 / Accepted after revision: 17 October 1997     

Japan’s greenhouse gas reduction scenarios toward net zero by 2050 in the material cycles and waste management sector

The first draft scenario toward net zero greenhouse gas (GHG) emissions by 2050 for the material cycles and waste management sector was presented by the Ministry of the Environment, Japan in August 2021. The details of the future GHG emission estimation used to create the draft scenario are described in this document. For multiple scenarios where more aggressive measures, such as carbon capture, utilization, and storage (CCUS), were included in addition to business-as-usual and the current policy continuity scenario, future GHG emissions were estimated as the sum of the products of activities and emission factors indicating changes in measures between scenarios. The estimation outcomes demonstrated that future GHG emissions from the solid waste management sector could be anticipated to be zero or even negative when material conversion to biomass, primarily for plastics, recycling to raw materials, and installation of CCUS at incineration facilities are assumed. Extensions of prior plans are not enough to reach the goal of net zero emissions, according to the measures necessary and the volume and pace of their implementation suggested in this study. Stakeholders should collaborate with great ambition.

     

Improvement of permeability of waste sludge by mixing with slag or construction and demolition waste

To determine the allowable ratio of waste sludge required to ensure an aerobic zone in the landfill, we investigated sludge permeability, which involved mixing sludge, the major landfill waste in Japan, at different mixing ratios with other wastes (slag and construction and demolition waste (C&D)). We measured parameters of sample permeability and analyzed parameters that exert a large influence on oxygen penetration depth with a simulation model accounting for both diffusion and convection driven by temperature gradients. We also determined the critical volumetric contents in which gas and/or water permeability change significantly when sludge is mixed with sand or gravel. From the results of the simulations, gas permeability of the layer, the difference between inside and outside temperatures and the oxygen consumption rate exert a large influence on the resulting oxygen penetration depth. The allowable ratio of sludge required to ensure an aerobic zone in the landfill was determined by considering the balance of the above three parameters. By keeping volumetric sludge content to below 25%, air convection and oxygen penetration depth of several meters were achieved in the modeling.     

Remediation of cadmium contamination in paddy soils by washing with chemicals: selection of washing chemicals

The efficiencies of neutral salts, strong acids, and chelates were tested for extracting cadmium (Cd) from three paddy soils. The higher the selectivity of the cations of the added neutral salts toward soil adsorption sites, the lower the pH in the extracts and the more soil Cd could be extracted. In addition, soil carbon and nitrogen contents and mineral composition were closely associated with the amount of Cd extracted. Calcium chloride and iron(III) chloride were selected as wash chemicals to restore Cd-contaminated paddy soils in situ. Washing with calcium chloride led to the formation of Cd chloride complexes, enhancing Cd extraction from the soils. The washing also substantially decreased soil levels of exchangeable and acid-soluble Cd, which are the major forms of bioavailable Cd for rice (Oryza sativa L.). The optimum conditions for in situ soil washing were also determined for calcium chloride.     

Phosphate removal and recovery with a synthetic hydrotalcite as an adsorbent

Phosphate removal is important to control eutrophication and an ion exchange process is one of several treatment processes for this purpose. Hydrotalcite compounds (HTALs) are useful as adsorbents for phosphate removal because of their ion exchange properties. In this study, the adsorption properties of a granular synthetic HTAL for phosphate and the method of regeneration of the granular HTAL were examined. The adsorption isotherm of the granular HTAL was approximated by a modified Langmuir type, and the maximum adsorption capacity was 47.3 mg P g(-1), which corresponded to the content of HTAL in the granular one. Phosphate adsorbed on the HTAL was effectively desorbed with alkaline NaCl solutions and the HTAL was regenerated with 25 w/v% MgCl(2) solution. The regenerated HTAL could be reused repeatedly for the phosphate removal. Phosphate in the exhausted desorption solution was recovered as a precipitate of calcium phosphate by addition of CaCl(2), and the residual exhausted desorption solution could be also reused after supplying NaOH. The results suggest the possibility of an effective system for phosphate removal and recovery, which includes the following processes: adsorption, desorption, recovery of phosphate, and regeneration of the HTAL and the desorption solution.     

Behavior of PCNs, PCDDs, PCDFs, and dioxin-like PCBs in the thermal destruction of wastes containing PCNs

In the first known study to characterize the emissions of polychlorinated naphthalenes (PCNs), polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and dioxin-like polychlorinated biphenyls (dl-PCBs) from the thermal treatment of wastes containing PCNs, the formation and decomposition behavior of these pollutants was investigated both at laboratory scale and at plant scale. Exhaust gas measurements from laboratory-scale combustion of rubber belts containing PCNs (FB belts) were used as the basis for calculations predicting that the incremental dioxin toxic equivalency (TEQ) emissions from municipal solid waste (MSW) incinerators would be less than 0.1 ng/m3 N. In order to directly examine co-incineration of FB belts with MSW and to address potential differences between the laboratory experiment and full-scale MSW incinerators, experiments were conducted using a larger scale thermal treatment test facility with sampling and analysis at several points in the thermal treatment process. Congener specific analysis of PCNs clearly showed that both destruction and synthesis simultaneously occurred during combustion in the kiln. Most of the PCNs were destroyed by secondary combustion, and almost all PCNs were removed after flue gas treatment. Almost all PCDDs/DFs were synthesized as by-products of kiln combustion, most of them were destroyed by the secondary combustion, and almost all dioxins (PCDDs/DFs and dl-PCBs) were removed after flue gas treatment. The TEQ emission levels were less than 0.1 ng/m3 N for all plant-scale tests, and differences in TEQ emission levels were very small. Adding wastes containing PCNs to MSW will not influence thermal treatment emissions to the environment from modern solid waste incinerators.