放射源使用中潜在照射危险的评价与控制浅述

文章介绍了潜在照射的主要来源及危害。结合实际应用中的具体情况,对其使用实践中可能导致的潜在危害作了简单的分析,并根据ICPLP的相关建议和国家相关的具体要求,提出在放射源应用领域潜在照射控制的主要原则和措施。     

机柜振动、冲击响应特性的试验研究

机柜是设备的安装架,当其受到某一安装平台的振动与冲击作用后,随着安装位置的不同,机柜内安装的单元设备所经受的振动、冲击量值和谱型也有很大不同。因此对于单元设备的振动、冲击考核条件不应等同于整系统的要求,而应该根据其安装平台的响应制定。     

城区天然气配气站噪声的产生及防治

城区天然气配气站噪声超标已成为供气部门亟待解决的难题,文章分析了配气站噪声污染现状,指出噪声产生原因主要为天然气流动,供气量增长使设备超负荷运行等7个方面。分别针对现有配气站和新建、改扩建站场提出降噪措施,指出设备在额定范围内运行、气体流速控制、工艺改造等是噪声控制的重要手段。并对城区天然气配气站噪声治理的进一步研究提出了建议。     

Antioxidative response to Cd in a newly discovered cadmium hyperaccumulator, Arabis paniculata F

A hydroponic experiment was carried out to study the effect of cadmium (Cd) on growth, Cd accumulation, lipid peroxidation, reactive oxygen species (ROS) content and antioxidative enzymes in leaves and roots of Arabis paniculata F., a new Cd hyperaccumuator found in China. The results showed that 22-89 microM Cd in solution enhanced the growth of A. paniculata after three weeks, with 21-27% biomass increase compared to the control. Cd concentrations in shoots and roots increased with increasing Cd supply levels, and reached a maximum of 1662 and 8670 mg kg(-1) Cd dry weight at 178 microM Cd treatment, respectively. In roots, 22-89 microM Cd reduced the content of malondialdehyde (MDA), superoxide (O(2)(-1)) and H(2)O(2) as well as the activities of superoxide dismutase (SOD), guaiacol peroxidase (GPX), ascorbate peroxidase (APX) and glutathione reductase (GR). In leaves, the contents of MDA, O(2)(-1) and H(2)O(2) remained unaffected by 22-89 microM Cd, while 178 microM Cd treatment significantly increased the MDA content, 69.5% higher than that of the control; generally, the activities of SOD, catalase (CAT), GPX and APX showed an increasing pattern with increasing Cd supply levels. Our present work concluded that A. paniculata has a great capability of Cd tolerance and accumulation. Moderate Cd treatment (22-89 microM Cd) alleviated the oxidative stress in roots, while higher level of Cd addition (178 microM) could cause an increasing generation of ROS, which was effectively scavenged by the antioxidative system.     

安全生产风险预警探讨

以实现风险预警理论及技术在实际生产过程中的应用为目的,通过在油气初加工企业建立并实施安全生产风险预警的实践,讨论了安全生产风险预警机制的具体建立及实施过程,进一步探讨了风险辨识及评价的模式和方法及风险预警流程.     

出口角度对防烟空气幕防烟效果影响的数值模拟

利用火灾动力学模拟软件FDS,以四川消防研究所高层实验塔二层为原型,模拟在不同防烟空气幕出口角度情况下高层建筑前室烟气运动情况,获得在其他条件不变情况下,空气幕运行时的最佳出口角度。试验结果表明:空气幕角度为5°及20°时,模拟试验后期烟气基本突破了空气幕蔓延至前室内,而当出口角度为10°和15°时防烟效果较好,且15°时防烟效果优于10°,故推荐空气幕运行时的最佳出口角度为15°。     

用灰关联分析和神经网络方法预测煤与瓦斯突出

本文应用灰色系统理论的灰色关联分析,对煤与瓦斯突出影响因素进行灰关联分析,得出了各影响因素对煤与瓦斯突出影响程度的大小排序,选择灰关联分析的五个优势因子:瓦斯放散初速度、坚固性系数、瓦斯压力、煤体破坏类型和开采深度,作为输入参数,用计算机对神经网络编写程序,建立了煤与瓦斯突出预测的神经网络模型.用我国典型突出矿井的煤与瓦斯突出实例作为学习样本,对网络进行训练学习,并以云南恩洪煤矿的煤与瓦斯突出实例作为预测样本进行验证.     

基于风险场的评价理论研究

目前,已经有多种方法可以用于石油化工企业的定量风险评价,但是这些方法多数是基于二维的风险分析,不能满足当今社会日趋增长的三维空间的安全管理和风险评价要求,因此,提出了三维的风险场的评价理论,从三维风险等值面来考察风险的分布和风险变化率.该方法采用场论的基本知识,把风险场看作数量场,对不同事故的个人风险及其风险梯度进行叠加,得到个人风险及其变化率.针对同一个危险源产生的爆炸、火灾和中毒三种风险属性,给出了其叠加后的个人风险和个人风险变化率公式,在相应的坐标系中并对二维和三维个人风险的不同的空间分布进行了比较.该方法能够清晰、直观、全面地表示出个人风险场的分布情况,同时能够了解到多个风险共同作用下的风险变化情况.     

Mathematical modelling of sewage sludge incineration in a bubbling fluidised bed with special consideration for thermally-thick fuel particles

Fluidised bed combustor (FBC) is one of the key technologies for sewage sludge incineration. In this paper, a mathematical model is developed for the simulation of a large-scale sewage sludge incineration plant. The model assumes the bed consisting of a fast-gas phase, an emulsion phase and a fuel particle phase with specific consideration for thermally-thick fuel particles. The model further improves over previous works by taking into account throughflow inside the bubbles as well as the floating and random movement of the fuel particles inside the bed. Validation against both previous lab-scale experiments and operational data of a large-scale industrial plant was made. Calculation results indicate that combustion split between the bed and the freeboard can range from 60/40 to 90/10 depending on the fuel particle distribution across the bed height under the specific conditions. The bed performance is heavily affected by the variation in sludge moisture level. The response time to variation in feeding rate is different for different parameters, from 6min for outlet H(2)O, 10min for O(2), to 34min for bed temperature.