Cement‐based solidification/stabilization of phenol‐contaminated soil by bentonite and organophilic clay

The performance of ordinary and organophilic clays in the solidification and stabilization process was investigated with respect to the unconfined compressive strength (UCS) and leaching of phenol‐contaminated soil. The samples contained 2,000 mg/kg of phenol. White cement (15 and 30 percent by weight [wt%]) was used as binder, while ordinary and organophilic clays (8, 15, and 30 wt%) were applied as additives for reducing the harmful effects of phenol interference in cement hydration with a 28‐day curing time. The results revealed that the UCS is reduced by increasing the amount of clays. The values of UCS of all samples met the minimum standards specified for disposal in sanitary landfills determined by developed countries. The leaching test demonstrated that the degree of leaching diminished with increased clay content in all samples of both clay types. This reduction was observed to be greater in samples containing organophilic clay than in bentonite clay samples. Furthermore, the best composition of the materials tested was determined to be 30 wt% white cement plus 13.3 wt% organophilic clay with a compressive strength of 3,839 kPa, phenol removal percentage of 80 percent, and a cost of $67 per ton of contaminated soil.     

Improving land use inference by factorizing mobile phone call activity matrix

Land use is shaped by human activities. Traditional methods of measuring land uses (e.g. surveys and remote sensing techniques) often have difficulties in capturing human activities. The near-ubiquitous coverage of mobile phones opens up a new way to investigate land use through human activities. We propose to analyze land use by characterizing human activity patterns based on the aggregated call volume, and apply non-negative matrix factorization to identify fundamental behavioral classes. Using tower-based call data from Dakar, Senegal, we discover two fundamental land use patterns: commercial/business/industrial (C/B/I) and residential. Then, the land use of the reception area of each cell tower can be inferred based on the weights obtained for each basis vector. To evaluate the proposed approach, the results are compared with two points-of-interest (POI) data sets obtained from OpenStreetMap and Facebook’s Graph API. We have found that a majority of POIs like embassies, offices, and hotels are located in the predicted C/B/I areas; specifically, there is a strong positive correlation between estimated land use weights and the number of related POIs. Furthermore, we have shown analyzing 24-h call pattern matrix can track daily land use changes.     

Lateral knowledge: shifting expertise for disaster management in Chile

Deemed as technocratic and exclusionary, disaster management has failed in its promise of knowing, let alone controlling, catastrophic events. Consequently, disaster managers are searching outside of science for sense‐making analytics. This paper analyses the emergent narratives articulated by disaster managers in Chile to cope with the uncertain nature of their object of intervention. It explores how knowledge of disasters is modified and enriched by disaster managers in what is termed here as ‘lateral knowledge’: the epistemic adjustment by which practitioners revalidate their expert status by expanding key assumptions about disaster risk reduction. The study, which draws on in‐depth interviews with disaster managers in Chile, suggests that lateral knowledge is established both through the increasing validation of community knowledge and the recognition of politics as a critical mediator in the practice of disaster management. The paper concludes by making the larger point that public understanding of science scholars should pay more attention to the adapting capacities of expertise.     

Photo-Fenton degradation of dichloromethane for gas phase treatment

A continuous photo-Fenton process has been used for the degradation of gaseous dichloromethane (DCM). By absorbing gaseous DCM into a reactive Fenton mixture, the scrubbing and degradation processes could be completed in the one reactor. Operating with a Dark Fenton solution did not result in removal of DCM any better than simply using MilliQ water. This was because the Fe(II) quickly converted to Fe(III) but was unable to regenerate. After a short time, the Fenton process was no longer operating and the DCM quickly accumulated in the reaction solution, preventing further accumulation due to a decreasing concentration gradient in the reactive solution. However, by using UV light and increasing the retention time from 20 to 50 s, there was sufficient time for the reactive solution to regenerate and continuous operation could achieve at least 65% removal of DCM from the gaseous phase at ambient temperature.     

Estimation of fecal Coliform removal from domestic sewage in two sand filter column systems

The objective of the present research is to compare fecal coliform removal from two different sand column systems treating septic tank effluent over a range of hydraulic loading rates. Drain time measurements were performed to compare the hydraulic characteristic of the column systems at different hydraulic loading rates. Biochemical oxygen demand (BOD), total suspended solids (TSS), and pH were also measured for the septic tank effluent. A removal of the order of 99% for fecal coliform, TSS, and BOD in column effluent was achieved using the sand filter columns. The ‘break‐in’ period for determining the effectiveness of the sand filter columns is also discussed.     

Multiple stressors,food system vulnerability and food insecurity in Humla,Nepal

Regional Environmental Change - As the impacts of climate change (CC) have become apparent, Nepal has recently implemented a number of programs emphasizing climate sensitive resource management and...     

Carbon stocks,emissions, and aboveground productivity in restored secondary tropical peat swamp forests

Mitigation and Adaptation Strategies for Global Change - Tropical wetlands such as peat swamp forests (PSFs) have been known globally as one of the carbon (C)-rich ecosystems. However, there is...     

Specific detection of organotin compounds with a recombinant luminescent bacteria

Organotin compounds are widely used as biocides in marine and terrestrial environments. Several currently used techniques allow either the measurement of the chemicals or their effects on living organisms. Our current research focuses on the development of a complementary method based on a bacterial bioluminescence-based bioassay for the specific detection of organotin compounds. The performance of the bioassay was assessed. The Escherichia coli bacterial strain used in this study is specific for TBT and DBT (with Cl, Br or I as the halogen group) with the central tin atom important for light production. The assay is conducted after overnight culture of the bacterial strain, followed by 60 min of contact time with the organotin compound for significant light production. The detection limits were found to be 0.08 microM for TBT (26 microgl(-1)) and 0.0001 microM for DBT (0.03 microgl(-1)) with a linear range of one logarithm. The repeatability of the bioassay is 8% and the reproducibility for TBT and DBT was approximately 14%. Lyophilization of the strains did not significantly modify the detection limit as well as the range of detection. Applications of the bioassay to environmental samples are discussed.     

Effect of fulvic acid on the photochemical degradation of methylparathion

Photochemical degradation of methylparathion (O,O,–dimethyl O-4 nitrophenylphosphorothioate) in the presence of fulvic acid (FA) between pH 2 and 7 was studied by differential pulse polarography (DPP). Fulvic acid and its photoproducts were not electro-active under the experimental conditions used in this study, and only the pesticide exhibited polarographic signals. Photolysis of methylparathion in acid media was sensitized by fulvic acid since the pesticide did not degrade in the absence of this compound. Methylparathion degradation was observed at each of the studied pHs. The reaction was first-order with rate constant values ranging from 3.3 × 10^?3 to 8.8 × 10^?3min^?1.     

Groundwater quality assessment of Nawa Tehsil in Nagaur district (Rajasthan) with special reference to Fluoride

In recent years, the problem of fluoride in Nawa tehsil (Nagaur district) has reached at an alarming proportion. In the last decades, the water table of the Nawa tehsil has fallen. With the lowering of the water table, the amount of fluoride has increased in the subsoil water which is used by the villagers when drawn through hand pumps, tube wells etc. So the present study illustrates the groundwater quality of randomly selected villages of Nawa tehsil. The highest fluoride concentration was found in Rulaniyo ki Dhani i.e. 14.62 ppm. The excessive intake of fluoride resulted in dental and skeletal fluorosis.