呼和浩特市可镇污水处理厂工程设计

呼和浩特市可镇污水处理厂近期建设规模1.0×104m3/d,远期总规模2.5×104m3/d。污水处理主体工艺采用组合式A2/O生化池+砂滤,污泥处理采用污泥贮池+带式浓缩脱水一体机,尾水采用液氯消毒,设计出水水质执行GB 18918—2002《城镇污水处理厂污染物排放标准》一级A排放标准。介绍了该工程的工艺流程、设计参数,总结分析了工艺设计的技术特点。同时阐述了针对低温条件下的运行保障措施和要求,为寒冷地区同类污水处理厂的设计提供参考和借鉴。     

碳源对厌氧氨氧化脱氮性能影响的试验研究

分别研究了无机碳源和有机碳源对厌氧氨氧化反应脱氮性能的影响。接种稳定运行的复合式UASB厌氧氨氧化反应器污泥至ASBR反应器进行批式试验,考察不同碳酸氢钠浓度及COD浓度条件下的氮素转化情况,研究碳源对厌氧氨氧化脱氮效果的影响。厌氧氨氧化反应适宜的进水碳酸氢钠浓度为1.5～2.0 mg/L,超过30 mg/L时有机碳源的存在对厌氧氨氧化反应产生抑制作用,COD浓度超过60 mg/L时反应器表现出反硝化特性。无机碳源对厌氧氨氧化反应的影响表现在提供充足碳源和调节反应器pH的综合作用,较高浓度的COD对厌氧氨氧化反应具有抑制作用。     

直接大红4BE的磷钨酸均相光催化还原脱色

以磷钨酸(H3PW12O40,PW12)为光催化剂,异丙醇(Isopropanol)作为电子给体的条件下对偶氮染料直接大红4BE进行均相光催化还原脱色研究,考察PW12用量、IS浓度、直接大红4BE和盐浓度等因素的影响,结果表明杂多蓝(PW1-2)对直接大红4BE具有明显的还原脱色作用.pH=2.0,直接大红4BE初始浓度50 mg·L-1,PW12浓度为600 mg·L-1,IS浓度为0.13mol·L-1,50 min直接大红4BE的脱色率可达到90.39%.4BE的光催化还原脱色速率随PW12和IS浓度的增加而增加,最后趋于恒定;直接大红4BE初始浓度增加,其光反应一级速率常数降低;PW12、IS和4BE浓度之间存在交互影响.离子强度增加,4BE脱色速率减小,表现为负的盐效应,推测4BE与光反应生成的杂多蓝(PW1-2)进行复合,然后发生电子转移引起偶氮染料还原脱色和杂多蓝氧化复原.本研究结果表明PW12/IS/UV能够有效用于偶氮染料直接大红4BE的还原脱色处理.     

含油污泥微乳化处理工艺研究

利用微乳化法对含油污泥进行资源化处理。通过对现场采得的SLGD含油污泥样品处理,得到该油泥的最佳微乳液组成为:SDS 0.16 g/mL,OTAC 0.04 g/mL,正丁醇0.47 g/mL,NaCl 0.034 g/mL,脱油率最高可达42.53%。最佳单次处理量为12 g(以10 mL水为基准);处理温度为30℃,最佳处理时间为30 min;在保证脱油率的前提下,微乳液可重复使用3次。     

关于抑尘剂开发及其存在主要问题的探讨

基于化学抑尘剂与粉尘之间的润湿、粘结、凝聚作用机制,综述了近年来各类化学抑尘剂的合成技术及原理,概述了化学抑尘剂在矿山粉尘抑制中的应用现状,并对化学抑尘剂研究方向的主要问题和应用前景进行了探讨。     

我国工业固体废物的产生特征及控制对策

工业固体废物是固体废物的重要组成部分。根据我国最近10年发布的工业固体废物统计数据,全面分析了我国工业固体废物的产生特点,研究了工业固体废物产生量、利用量和处置量、工业固体废物区域和行业分布特点以及与工业产值的关系,并针对我国工业固体废物管理存在的问题,提出了相应的对策和建议。     

煤矿甲烷涌出量估算方法及分类涌出系数研究

介绍了煤矿甲烷宏观涌出量的估算方法,选择使用原煤产量法,以煤矿甲烷的相对涌出量为基础,建立了"产量-涌出量函数模型",得到三种不同类型矿井煤矿甲烷的分类涌出系数。     

Effects of physical and chemical characteristics of surface sediments in the formation of shallow lake algae-induced black bloom

Surface sediments are closely related to lake black blooms. The dissolved oxygen （DO） distribution and its penetration depth in surface sediments as well as the migration and transformation of redox sensitive elements such as Fe and S at the sediment-water interface are important factors that could influence the formation of the black bloom. In this study, dredged and undredged sediment cores with different surface properties were used to simulate black blooms in the laboratory. The Micro Profiling System was employed to explore features of the DO and ∑H2S distribution at the sediment-water interface. Physical and chemical characteristics in sediments and pore waters were also analyzed. The results showed that sediment dredging effectively suppressed the black blooms. In the undredged treatment, DO penetration depth was only 50 μm. Fe^2＋ concentrations, ∑H2S concentrations, and ∑H2S production rates were remarkably higher in surface sediments and pore waters compared to control and dredged treatments. Furthermore, depletion of DO and accumulation of Fe^2＋ and ∑H2S in surface sediments and pore waters provided favorable redox environments and necessary material sources for the blooms. The study results proved that physical and chemical characteristics in surface sediments are important factors in the formation of the black bloom, and could provide scientific guidance for emergency treatment and long-term pre-control of black blooms.     

Enhanced photocatalytic activity of quantum-dot-sensitized one-dimensionally-ordered ZnO nanorod photocatalyst

An efficient photocatalyst was fabricated by assembling quantum dots （QDs） onto one-dimensionally-ordered ZnO nanorods, and the photocatalytic properties for Methyl Orange degradation were investigated by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, UV-Vis-NIR absorption spectroscopy and photoluminescence. The results indicate that the catalyst with assembled QDs is more favorable for the degradation than the pristine ZnO nanorods. The QDs with core-shell structure lower the photocatalytic ability due to the higher carder transport barrier of the ZnS shell layer. Besides its degradation efficiency, the photocatalyst has several advantages given that the one-dimensionally-ordered ZnO nanorods have been grown directly on indium tin oxide substrates. The article provides a new method to design an effective and easily recyclable photocatalyst.     

An online monitoring system for atmospheric nitrous acid (HONO) based on stripping coil and ion chromatography

A new instrument for measuring atmospheric nitrous acid(HONO) was developed,consisting of a double-wall glass stripping coil sampler coupled with ion chromatography(SC-IC).SC-IC is featured by small size(50 × 35 × 25 cm) and modular construction,including three independent parts:the sampling unit,the transfer and supporting unit,and the detection unit.High collection efficiency(> 99%) was achieved with 25 μmol/L Na2CO3 as absorption solution even in the presence of highly acidic compounds.This instrument has a detection limit of 8 pptv at 15 min time resolution,with a measurement uncertainty of 7%.Potential interferences from NOx,NO2+SO2,NO2+VOCs,HONO+O3,HNO3,peroxyacetyl nitrite(PAN) and particle nitrite were quantified in laboratory studies and were found to be insignificant under typical atmospheric conditions.Within the framework of the 3C-STAR project,inter-comparison between the SC-IC and LOPAP(long path liquid absorption photometer) was conducted at a rural site in the Pearl River Delta.Good agreement was achieved between the two instruments over three weeks.Both instruments determined a clear diurnal profile of ambient HONO concentrations from 0.1 to 2.5 ppbv.However,deviations were found for low ambient HONO concentrations(i.e.< 0.3 ppbv),which cannot be explained by previous investigated interference species.To accurately determine the HONO budget under illuminated conditions,more intercomparison of HONO measurement techniques is still needed in future studies,especially at low HONO concentrations.