Bisphenol A in hazardous waste landfill leachates

The levels of bisphenol A in hazardous waste landfill leachates collected in Japan in 1996 were determined by gas chromatograph/mass spectrometer (GC/MS). Bisphenol A was found in seven of 10 sites investigated. All the hazardous waste landfills with leachates contaminated by bisphenol A were controlled. The concentrations of bisphenol A ranged from 1.3 to 17,200 microg/l with a median concentration of 269 microg/l. The source of bisphenol A in landfill leachates may be the waste plastics in waste landfill. The concentrations of bisphenol A in some samples exceeded the EC50 or LC50 levels for aquatic biota. Landfill leachates may be a significant source of bisphenol A found in the environment.     

Postembryonic development of the bone-eating worm Osedax japonicus

Bone-eating worms of the genus Osedax exclusively inhabit sunken vertebrate bones on the seafloor. The unique lifestyle and morphology of Osedax spp. have received much scientific attention, but the whole process of their development has not been observed. We herein report the postembryonic development and settlement of Osedax japonicus Fujikura et al. (Zool Sci 23:733–740, 2006). Fertilised eggs were spawned into the mucus of a female, and the larvae swam out from the mucus at the trochophore stage. Larvae survived for 10 days under laboratory conditions. The larvae settled on bones, elongated their bodies and crawled around on the bones. Then they secreted mucus to create a tube and the palps started to develop. The palps of O. japonicus arose from the prostomium, whereas the anterior appendages of other siboglinids arose from the peristomium. The recruitment of dwarf males was induced by rearing larvae with adult females. Females started to spawn eggs 6 weeks after settlement.     

Inactivation effect of pressurized carbon dioxide on bacteriophage Qβ and ΦX174 as a novel disinfectant for water treatment

The inactivation effects of pressurized CO2 against bacteriophage Qβ and ΦX174 were investigated under the pressure of 0.3–0.9 MPa, initial concentration of 107–109PFU/mL, and temperature of17.8°C–27.2°C. The optimum conditions were found to be 0.7 MPa and an exposure time of 25 min. Under identical treatment conditions, a greater than 3.3-log reduction in bacteriophage Qβ was achieved by CO2, while a nearly 3.0 log reduction was observed for phage ΦX174. The viricidal effects of N2O(an inactivation gas with similar characteristics to CO2), normal acid(HCl), and CO2 treatment with phosphate buffered saline affirmed the chemical nature of CO2 treatment. The pumping cycle, depressurization rate, and release of intracellular substances caused by CO2 were its viricidal mechanisms. The results indicate that CO2 has the potential for use as a disinfectant without forming disinfection by-products.     

Post furnace formation of PCDDs and PCDFs in MSWI: Observations in an incinerator installed with quench reactor

Reduction of dioxin emission by a quench reactor with lime spray was investigated in relation to post furnace formation pathways. Results showed that the quench reactor performed to supress post furnace reaction of precursor molecules to form selected congeners of PCDD and PCDF.     

Life cycle assessment of integrated recycling schemes for plastic containers and packaging with consideration of resin composition

Many life cycle assessment studies have evaluated and compared the environmental performance of various technologies for recycling plastic containers and packaging in Japan and other countries. However, no studies have evaluated the combination of recycling technologies in consideration of the resin composition in terms of the quantity of each recycled product so as to maximize their environmental potential. In this study, 27 scenarios of recycling schemes for household waste plastic containers and packaging are developed through integrating a conventional recycling scheme with additional recycling schemes. The conventional recycling scheme involves municipal curbside collection and either the material recycling or feedstock recycling of waste plastics. The additional recycling schemes are feedstock recycling in steel works of the residue from conventional material recycling processes, and corporate voluntary collection and independent material recycling of specific types of plastic trays. Life cycle assessment based on the modeling of recycling processes considering the resin composition in terms of the quantity of each recycled product is applied to evaluate and compare these scenarios from the viewpoints of fossil resource consumption and CO₂ emission. The results show that the environmental loads are reduced in all scenarios including the additional recycling schemes compared with the conventional recycling scheme. However, the independent plastic tray recycling scheme exhibits lower additional environmental savings when the residue recycling scheme is integrated with the conventional material recycling scheme. This is because both additional recycling schemes aim to utilize polystyrene and polyethylene terephthalate, which would otherwise be incinerated as residue from material recycling processes. The evaluation of the environmental loads of plastic recycling with consideration of the resin composition in terms of the quantity of each recycled product makes it possible to investigate recycling schemes that integrate different technologies to maximize their environmental potential.