Studies on automated survey system of environmental chemicals by gas chromatography-mass spectrometry-computer II. Three dimensional mass chromatography

A three dimensional mass chromatography (TDMC), which is the extended method of mass chromatography, has been developed for the analysis of environmental chemicals. A considerable performance was suggested by the combination of TDMC to gas chromatography-mass spectrometry-computer system.     

Residual organic fluorinated compounds from thermal treatment of PFOA,PFHxA and PFOS adsorbed onto granular activated carbon (GAC)

Perfluorooctanoic acid (PFOA), perfluorohexanoic acid (PFHxA) and perfluorooctane sulfonate (PFOS) adsorbed onto granular activated carbon (GAC) were thermally treated in N₂ gas stream. The purpose was to assess the fate of perfluoroalkyl and polyfluoroalkyl substances (PFASs) during thermal regeneration of GAC, which had been used for water treatment. Mineralized F, residual PFASs including short-chained species, and volatile organic fluorine (VOF) were determined. In a temperature condition of 700 °C, VOF were 13.2, 4.8, and 5.9 % as for PFOA, PFHxA, and PFOS. However, the VOF decreased to 0.1 %, if the GAC and off-gas were kept at 1000 °C. No PFASs remained in GAC at 700–1000 °C; at the same time, short-chained PFASs were slightly detected in the aqueous trapping of off-gas at 800 and 900 °C conditions. The destruction of PFASs on GAC could be perfect if the temperature is higher than 700 °C; however, the process is competitive against volatile escape from GAC. Destruction in gaseous phase needs a temperature as high as 1000 °C. Destruction of PFASs on the surface of GAC, volatile escape from the site, and thermolysis in gas phase should be considered, as to thermal regeneration of GAC.     

Effects of a composition change of ordinary Portland cement on waste utilization and CO2 emissions in Japan

Journal of Material Cycles and Waste Management - This paper estimates the effects of a composition change of ordinary Portland cement on waste utilization and CO2 emissions in the Japanese cement...     

Age-Dependent Factors Affecting Thoracic Response: A Finite Element Study Focused on Japanese Elderly Occupants

Objectives: The ultimate goal of this research is to reduce thoracic injuries due to traffic crashes, especially in the elderly. The specific objective is to develop and validate a full-body finite element model under 2 distinct settings that account for factors relevant for thoracic fragility of elderly: one setting representative of an average size male and one representative of an average size Japanese elderly male.

Methods: A new thorax finite element model was developed from medical images of a 71-year-old average Japanese male elderly size (161cm, 60 kg) postmortem human subject (PMHS). The model was validated at component and assembled levels against original series of published test data obtained from the same elderly specimen. The model was completed with extremities and head of a model previously developed. The rib cage and the thoracic flesh materials were assigned age-dependent properties and the model geometry was scaled up to simulate a 50th percentile male. Thereafter, the model was validated against existing biomechanical data for younger and elderly subjects, including hub-to-thorax impacts and frontal impact sled PMHS test data. Finally, a parametric study was conducted with the new models to understand the effect of size and aging factors on thoracic response and risk of rib fractures.

Results: The model behaved in agreement with tabletop test experiments in intact, denuded, and eviscerated tissue conditions. In frontal impact sled conditions, the model showed good 3-dimensional head and spine kinematics, as well as rib cage multipoint deflections. When properties representative of an aging person were simulated, both the rib cage deformation and the predicted number of rib fractures increased. The effects of age factors such as rib cortical thickness, mechanical properties, and failure thresholds on the model responses were consistent with the literature. Aged and thereby softened flesh reduced load transfer between ribs; the coupling of the rib cage was reduced. Aged costal cartilage increased the severity of the diagonal belt loading sustained by the lower loaded rib cage.

Conclusions: When age-specific parameters were implemented in a finite element (FE) model of the thorax, the rib cage kinematics and thorax injury risk increased. When the effect of size was isolated, 2 factors, in addition to rib material properties, were found to be important: flesh and costal cartilage properties. These 2 were identified to affect rib cage deformation mechanisms and may potentially increase the risk of rib fractures.     

Behavior of PCNs, PCDDs, PCDFs, and dioxin-like PCBs in the thermal destruction of wastes containing PCNs

In the first known study to characterize the emissions of polychlorinated naphthalenes (PCNs), polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and dioxin-like polychlorinated biphenyls (dl-PCBs) from the thermal treatment of wastes containing PCNs, the formation and decomposition behavior of these pollutants was investigated both at laboratory scale and at plant scale. Exhaust gas measurements from laboratory-scale combustion of rubber belts containing PCNs (FB belts) were used as the basis for calculations predicting that the incremental dioxin toxic equivalency (TEQ) emissions from municipal solid waste (MSW) incinerators would be less than 0.1 ng/m3 N. In order to directly examine co-incineration of FB belts with MSW and to address potential differences between the laboratory experiment and full-scale MSW incinerators, experiments were conducted using a larger scale thermal treatment test facility with sampling and analysis at several points in the thermal treatment process. Congener specific analysis of PCNs clearly showed that both destruction and synthesis simultaneously occurred during combustion in the kiln. Most of the PCNs were destroyed by secondary combustion, and almost all PCNs were removed after flue gas treatment. Almost all PCDDs/DFs were synthesized as by-products of kiln combustion, most of them were destroyed by the secondary combustion, and almost all dioxins (PCDDs/DFs and dl-PCBs) were removed after flue gas treatment. The TEQ emission levels were less than 0.1 ng/m3 N for all plant-scale tests, and differences in TEQ emission levels were very small. Adding wastes containing PCNs to MSW will not influence thermal treatment emissions to the environment from modern solid waste incinerators.     

Pyrosequencing Analysis of Norovirus Genogroup II Distribution in Sewage and Oysters: First Detection of GII.17 Kawasaki 2014 in Oysters

Norovirus GII.3, GII.4, and GII.17 were detected using pyrosequencing in sewage and oysters in January and February 2015, in Japan. The strains in sewage and oyster samples were genetically identical or similar, predominant strains belonging to GII.17 Kawasaki 2014 lineage. This is the first report of GII.17 Kawasaki 2014 in oysters.     

Effects of dietary habits and CYP1A1 polymorphisms on blood dioxin concentrations in Japanese men

The major source of dioxin impurities in Japan in the past was agrochemical formulations; more recently, it has been exhaust from waste incinerators. To examine the environmental and genetic factors that influence blood dioxin concentration, we investigated the relationship among dioxin concentrations, dietary habits and cytochorome P450 1A1 (CYP1A1) polymorphisms (MspI type and Ile-Val type) in Japanese fishermen and farmers, including also a group of office workers as controls. The mean dioxin concentrations in the fishermen, the farmers and the controls were 161369, 79079 and 100500 pg/g fat, respectively. The elevated dioxin concentration with polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and coplanar-PCBs found in the fishermen may be due to the frequent consumption of fish; no such relationship was found both in the farmers and the controls. We found that the concentrations of congeners found as impurities in certain chemicals such as those previously used in agriculture showed no significant differences among the three groups; we consider it unlikely that the farmers would be directly exposed to dioxins from such chemicals. Thus, it is probable that the primary route of dioxin exposure in the Japanese population is through the food chain via fish consumption, regardless of occupation. No meaningful relationship between blood dioxin concentration and CYP1A1 polymorphisms was found in this study, although there was a significant difference between the concentration of total non-ortho-PCBs in genotypes A and B. Further studies on more subjects, including those of genotype C, are needed to confirm the relationship between blood dioxin concentrations and MspI polymorphisms.     

Pathways and Kinetics on Photocatalytic Destruction of Aqueous Phenol

In this study, the TiO₂ photocatalytic decomposition process of aqueous phenol was investigated. The intermediate products generated in the elementary reaction steps in the mineralization process were experimentally identified as hydroquinone, catechol and hydroxyhydroquinone. The concentration variations of these intermediate products with time passage were traced by high performance liquid chromatograph. The pathways of the decomposition process were given. Based on Langmuir isothermal theory and Langmuir-Hinshelwood mechanism, the multi-compounds competition kinetic model was established. In this model, the observed time-dependent concentrations of phenol and the intermediate products were simulated.