Environmental and human exposure assessment monitoring of communities near an abandoned mercury mine in the Philippines: a toxic legacy

Abandoned mines are an important global concern and continue to pose real or potential threats to human safety and health including environmental damage/s. Very few countries had government mine regulation and reclamation policies until the latter part of the century where legal, financial and technical procedures were required for existing mining operations. Major reasons for mine closure may be mainly due to poor economies of the commodity making mining unprofitable, technical difficulties and national security. If the mine is abandoned, more often than not it is the government that shoulders the burden of clean-up, monitoring and remediation. The topic of abandoned mines is complex because of the associated financial and legal liability implications. Abandoned mercury mines have been identified as one of the major concerns because of their significant long-term environmental problems. Primary mercury production is still ongoing in Spain, Kyrgzystan, China, Algeria, Russia and Slovakia while world production declined substantially in the late 1980s. In the Philippines, the mercury mine located southeast of Manila was in operation from 1955 to 1976, before ceasing operation because of the decline in world market price for the commodity. During this time, annual production of mercury was estimated to be about 140,000 kg of mercury yearly. Approximately 2,000,000 t of mine-waste calcines (retorted ore) were produced during mining and roughly 1,000,000 t of these calcines were dumped into nearby Honda Bay to construct a jetty to facilitate mine operations where about 2000 people reside in the nearby three barangays. In October, 1994 the Department of Health received a request from the Provincial Health Office for technical assistance relative to the investigation of increasing complaints of unusual symptoms (e.g. miscarriages, tooth loss, muscle weakness, paralysis, anemia, tremors, etc.) among residents of three barangays. Initial health reports revealed significant elevation of blood mercury levels exceeding the then recommended exposure level of 20ppb in 12 out of the 43 (27.9%) residents examined. The majority of the volunteers were former mine workers. In this study the abnormal findings included gingivitis, mercury lines, gum bleeding and pterydium. The most common neurologic complaints were numbness, weakness, tremors and incoordination. Anemia and elevated liver function tests were also seen in a majority of those examined. The assessment also revealed a probable association between blood mercury level and eosinophilia. The same association was also seen between high mercury levels and the presence of tremors and working in the mercury mine. To date, there are very limited environmental and health studies on the impact of both total and methylmercury that have been undertaken in the Philippines. Thus, this area of study was selected primarily because of its importance as an emerging issue in the country, especially regarding the combined effects of total and methylmercury low-dose and continuous uptake from environmental sources. At present the effects of total mercury exposure combined with MeHg consumption remain an important issue, especially those of low-dose and continuous uptake. Results of the study showed that four (4) species of fish, namely ibis, tabas, lapu-lapu and torsillo, had exceeded the recommended total mercury and methylmercury levels in fish (NV>0.5 microg/gf.w., NV>0.3 microg/gf.w., respectively). Saging and kanuping also exceeded the permissible levels for methylmercury. Total and methylmercury in canned fish, and total mercury in rice, ambient air and drinking water were within the recommended levels, however, additional mercury load from these sources may contribute to the over-all body burden of mercury among residents in the area. Surface water quality at the mining area, Honda Bay and during some monitoring periods at Palawan Bay exceeded total mercury standards (NV>0.002 ng/mL). Soil samples in two sites, namely Tagburos and Honda Bay, exceeded the EPA Region 9 Primary Remediation Goal recommended values for total mercury for residential purposes (NV>23 mg/kg). The hand to mouth activity among infants and children is another significant route for mercury exposure. Statistically significant results were obtained for infants when comparing the results after one year of monitoring for methylmercury levels in hair for both exposed and control sub-groups. Likewise, comparing the initial and final hair methylmercury levels among pregnant women/mothers in the exposed group showed statistically significant (p<0.05) results. Comparing the exposed and control sub-groups' mercury hair levels per sub-group showed statistically significant results among the following: (a) initial and final total mercury hair levels among children, (b) initial and final methylmercury hair levels among children, (c) final total mercury hair levels among pregnant women, (d) initial and final total mercury hair levels among mothers, and (e) initial and final methyl hair levels among mothers.     

Solar photovoltaic investments and economic growth in EU: Are we able to evaluate the nexus?

A core question in energy economics may be stated as follows: Is the cost–benefit analysis being correctly applied when we encourage investments in renewables, as an alternative to the traditional energy sources? The relationship between energy consumption and economic growth has been extensively treated within economics literature. Yet, literature on the nexus between specific energy sources and GDP is almost inexistent. In this article, we intend to explore the relationship between a certain type of renewable generation technology (solar PV) and GDP. The present and above all the planned energy mix might differ widely from one country to another. Thus, the analysis by source of energy generation becomes a helpful instrument for policy-making. Using a fixed effects panel data methodology and a sample of eighteen EU countries, we find that a 1 % increase in solar PV installed capacity and in electricity production from renewable sources has a positive impact on GDP of 0.0248 and 0.0061 %, respectively. We also conclude that a 1 % growth on greenhouse gas emissions positively affects GDP by 0.3106 %. Further evidence reveals that, in terms of country-specific analysis, Germany, France, Italy and the UK have the most significant estimations for fixed effects. In fact, Germany is a solar PV technology producer, France has a very active nuclear sector, with little pressure for both renewables development and CO₂ reductions, Italy had in this period a strong governmental support to this sector, and the UK has a strong connection between the solar PV and the industry sectors.     

Assessing the effects of heavy metal contamination on the proteome of the moss Pseudoscleropodium purum cross-transplanted between different areas

Protein expression was assessed in samples of Pseudoscleropodium purum cross-transplanted between one unpolluted (UNP) and two polluted (POLL) sites. Firstly, the level of expression (LE) of 17 proteins differed between native mosses from both types of sites, but differences were only maintained throughout the experiment for 5 of them. The LE of these five proteins changed over time in mosses transplanted from UNP to POLL and vice versa, becoming similar to that in autotransplants. However, these changes occurred slower than changes in the heavy metal concentrations measured in the same samples, and therefore they were not related to atmospheric pollution. Although the proteins identified were associated with moss metabolism, the expected growth reduction in samples autotransplanted within POLL (as a result of the down-regulation of photosynthesis-related proteins), did not occur. This supports the hypothesis that mosses growing in polluted areas adapt to heavy metal pollution and are able to reduce/overcome their toxic effects (i.e., reduced growth). Nevertheless, further specific research must be carried out to identify the proteins involved in this type of response, as lack of information on the bryophyte genome precludes us from reaching further conclusions.     

Optimal bulking agent particle size and usage for heat retention and disinfection in domestic wastewater sludge composting

Composting of two types of sludge produced in wastewater treatment plants, raw sludge (RS) and anaerobically digested sludge (ADS), has been systematically studied by means of the experimental design technique. The results have been analyzed using a full factorial experimental design in order to determine the optimal conditions for composting such sludges in terms of bulking agent particle size and bulking agent:sludge volumetric ratio, two of the key parameters to ensure an optimal performance of the composting process. The objective function selected was a simulated death kinetics of Salmonella, which was chosen as a model pathogen microorganism to represent the disinfection of the material. For both types of sludge, optimal values were found at 5mm bulking agent particle size and 1:1 bulking agent:sludge volumetric ratio when a Gaussian function was fitted to the experimental data. Pilot scale experiments using optimal values obtained were successfully undertaken and confirmed a full disinfection of the sludge by means of the composting process. A mathematical model to simulate the disinfection performance of a composting material is presented. The model can be applied to simulate the disinfection performance of a given pathogen.     

Comparison of aerobic and anaerobic stability indices through a MSW biological treatment process

A complex mechanical-biological waste treatment plant designed for the processing of mixed municipal solid wastes (MSW) and source-selected organic fraction of municipal solid wastes (OFMSW) has been studied by using stability indices related to aerobic (respiration index, RI) and anaerobic conditions (biochemical methane potential, BMP). Several selected stages of the plant have been characterized: waste inputs, mechanically treated wastes, anaerobically digested materials and composted wastes, according to the treatment sequence used in the plant. Results obtained showed that the main stages responsible for waste stabilization were the two first stages: mechanical separation and anaerobic digestion with a diminution of both RI and BMP around 40% and 60%, respectively, whereas the third stage, composting of digested materials, produced lesser biological degradation (20-30%). The results related to waste stabilization were similar in both lines (MSW and OFMSW), although the indices obtained for MSW were significantly lower than those obtained for OFMSW, which demonstrated a high biodegradability of OFMSW. The methodology proposed can be used for the characterization of organic wastes and the determination of the efficiency of operation units used in mechanical-biological waste treatment plants.     

Child passenger injury risk in motor vehicle crashes: a comparison of nighttime and daytime driving by teenage and adult drivers

INTRODUCTION: To examine the association between child passenger injury risk, restraint use, and crash time (day vs. night) for children in crashes of vehicles driven by teenage versus adult drivers. METHODS: Cross-sectional study involving telephone interviews with insured drivers in a probability sample of 6,184 crashes involving 10,028 children. RESULTS: Child passengers in teen nighttime crashes had an increased injury risk and an increased risk of restraint nonuse compared with those in teen daytime crashes. This increased injury risk can be explained by differences in the age of child passengers, collision type, and child passenger's restraint status associated with time of day. CONCLUSIONS: In order to limit the risk of injury to child passengers driven by teens, Graduated Driver Licensing (GDL) laws should include provisions restricting nighttime driving, as well as mandates for age-appropriate restraint for child passengers. Consideration should also be given for education in child passenger safety for novice teen drivers as part of the licensing process. IMPACT ON INDUSTRY: Results of this study can be used to support advocacy efforts by the automotive industry and others to promote nighttime driving restrictions on novice drivers. In addition, given that both driver groups were more likely to be involved in a single-vehicle collision during the night, technologies such as electronic stability control may offer opportunities for protection. Further reseach on specific circumstances of teen nighttime crashes is needed to inform industry efforts to improve visibility or vehicle operation under poor lighting conditions.     

Economic assessment of microbial biodiesel production using heterotrophic yeasts

The production of biodiesel using oleaginous microorganisms is investigated as promising alternative to produce a truly sustainable and renewable transportation fuel. While the feasibility of this approach has been shown on the laboratory scale, a commercial scale implementation is to date inhibited due to economic restraints. In order to evaluate the current cost situation and to develop suggestions to reduce production related costs, a simple cost analysis of the proposed microbial oil production process has been carried out. For closed fermentation in large-scale fermenters a break-even price of 2,350 US$ t^–1 for microbial oil was calculated. In the context of a sensitivity analysis it was shown that especially alterations in capital cost can lead to overall cost reductions. Accordingly, an open pond cultivation approach was designed, cutting the cost for equipment almost in half and decreasing the break-even price to 1,723 US$ t^–1. However, these reductions are only feasible when stable biomass and lipid yields can be ensured in open-pond systems, because the sensitivity analysis identified these yield parameters as leading factors influencing the break-even price. Even under very optimistic assumptions, it was not possible to reduce the break-even price below that of conventional plant oils as competitive products. Therefore, economic feasibility of the process will probably only occur if on one hand considerable technical development and efficiency improvements of the production process are made while on the other hand plant and crude oil prices are continuously increasing.     

PM source apportionment and trace metallic aerosol affinities during atmospheric pollution episodes: a case study from Puertollano, Spain

Source apportionment study was performed, applying principal component analysis to the results of 221 chemical analyses of PM10 and PM2.5 samples collected daily from the industrial (but low traffic) Spanish town of Puertollano over a 14-month period during 2004-2005. Results reveal compositional variations attributable to different mixtures of natural and anthropogenic materials, mainly soil and rock dust (crustal), marine salt (only in PM10), petrochemical refinery emissions, and particles attributed to the combustion of local coal, which is unusually rich in Pb and Sb. During the study period there were 34 pollution episodes when PM10 exceeded 50 tg m(-3), mostly due to winter air temperature inversions, regional atmospheric stagnation, or African dust incursions (North African, NAF days: usually in summer). Whereas the crustal component during NAF episodes averaged 52% with a PM2.5/PM10 ratio of 0.54, this dropped to 29% and a PM2.5/PM10 of 0.67 during non-NAF days when anthropogenic materials predominated. Abnormally enhanced concentrations of pathfinder metallic trace elements provide additional evidence for source apportionment: thus aerosols with raised levels of Pb and Sb are associated with local coal combustion, Ni and V can be linked to petrochemical PM emissions, and Ti, Mn, Rb, and Ce are particularly characteristic of crustal dust incursions.