BTEX pollution caused by motorcycles in the megacity of HoChiMinh

Monitoring of benzene, toluene and xylenes (BTEX) was conducted along with traffic counts at 17 roadside sites in urban areas of HoChiMinh. Toluene was the most abundant substance, followed by p,m-xylenes, benzene, o-xylene and ethylbenzene. The maximum observed hour-average benzene concentration was 254 μg/m3 . Motorcycles contributed to 91% of the traffic fleet. High correlations among BTEX species, between BTEX concentrations and the volume of on-road motorcycles, and between inter-species ratios in air and in gasoline indicate the motorcycle-exhaust origin of BTEX species. Daily concentrations of benzene, toluene, ethylbenzene, p,m-xylenes and o-xylene were 56, 121, 21, 64 and 23 μg/m 3 , respectively. p,m-xylenes possess the highest ozone formation potential among the BTEX family.     

基于风险的石油化工装置安全距离确定方法研究

借鉴国际上先进的风险评估技术方法,建立可行的计算安全距离的基本原则,全面考虑安全距离影响因素,科学确定个体伤害暴露标准和潜在危险的伤害标准,应用系统化危险识别技术,形成一套石油化工装置安全距离确定方法。     

保护层分析应用规则研究

为了确保保护层分析(LOPA)结果的客观性和可靠性,对LOPA的应用规则进行了探讨.按照LOPA应用的基本程序,对场景筛选、确定初始事件、独立保护层评估、场景频率计算、风险决策及后续跟踪等的相关规则进行了阐述.企业在应用LOPA时,应严格按照这些规则进行.     

Farmers’ perceptions of climate variability and barriers to adaptation: lessons learned from an exploratory study in Vietnam

Southeast Asian countries are confronting climate variability, challenging agricultural sustainability and rural livelihoods. However, little research effort has been devoted to exploring how farmers in those countries perceive climate variability and how the perceptions link to adaptive responses. This paper deploys information from three focus group discussions with 30 male farmers; and six in-depth interviews with one female and five male agricultural officers in the Mekong Delta, Vietnam. Recorded 34-year meteorological data in the delta from 1978 to 2011 is also incorporated to demonstrate the actual climate variability of the region. We find that farmers are becoming increasingly conscious of local climate variability issues. However, they have limited understanding of the importance of adaptation to their livelihoods. They also have limited knowledge of where and who to contact for appropriate climate change adaptation information. No opinions about the link between global warming and local climate variability and change were observed. Casual observation via public media and personal experience dominated farmers’ sources of information. Barriers to farmers’ adaptation are not exclusively restricted to socio-economic factors and resource constraints; e.g. land tenure, technical knowledge, market, social relationship, credit, information, health care, and demographics. Maladaptation, habit, and the perception of the importance of climate variability and adaptation are found as additional constraints. Observed differences in farmers’ and agricultural officers’ perspectives regarding barriers to farmers’ adaptation suggest important policy implications.     

油田联合站安全性评价模式研究

针对联合站生产过程复杂、安全影响因素多的特点,提出了二级模糊综合安全评价方法。以港东联合站的实际情况为基础,在系统分析联合站危险因素的基础上,选取储罐、管道、监控系统、其他系统4个因素作为联合站安全评价的主要关联因子,构建了针对港东联合站安全的二级综合模糊评估模型。运用层次分析法确定不同层次和因素的重要度,以加权法为运算准则,确定了联合站的安全等级。评估结果表明:该二级模糊综合评价方法提高了联合站安全现状评价的客观性,评估过程易于实现,评价结果更加客观、合理。     

白银天然沸石对磷的吸附机理及性能研究

为探明天然沸石对磷的吸附机理,首先利用扫描电镜、X射线衍射、X荧光分析等对甘肃白银产天然沸石进行了表征,然后通过静态实验探讨了吸附时间、磷初始浓度、pH值等因素对沸石除磷性能的影响.研究结果表明：沸石对水溶液中磷的吸附动力学过程符合Pseudo second-order模型;Freudlich和Langmuir模型均可较好地描述沸石对磷的吸附特征;沸石对磷的吸附量随pH值增大而明显减小.     

Emission of dioxins/furans and other U-POPs from test burns of non-POP pesticides in a hazardous waste incinerator

This paper presents the results of test burns for obsolete pesticides (OPs) of the permethrin group in a high temperature incinerator (HTI) in Southeast Asia. Three test burn runs were conducted, a baseline run when no OP was fed to the incinerator, and two test runs with different mixtures of OP compounds (formula 1 and 2, refer to Table 1 for detail) containing chlorine in the feeding wastes. The unintentional formed persistent organic pollutants (U-POPs) including 17 dioxins/furans, 12 dioxin-like PCBs and 12 chlorobenzenes (CBs) were monitored in all input materials and all discharges (flue gas, scrubbing liquid and solid residues). The results show relatively high levels of the U-POPs in the flue gas emission with total dioxins/furans of 4.4, 3.4, and 8.4 ng I-TEQ/m³ in the baseline, test run 1 and test run 2, respectively, which are above international acceptable emission levels. The PCB levels in flue gas were, respectively, 0.01, 0.3 and 0.4 ng I-TEQ/m³. The baseline thus had similar U-POPs levels with the OP test runs.In stack emission, approximately 90% of the U-POPs and 100% of CBs were present in gas phase. The emission factors, mass of pollutants per metric ton (tonne) of input waste, of U-POPs associated with fly ash (from bag house) were the highest, followed by flue gas and bottom ash while those associated with scrubbing liquid were relatively low. Among the waste input material only the black toner power contained U-POPs, but at low levels. The profiles of the dioxins/furans and PCBs in the toner waste were significantly different from that in the discharges. Despite the overall good destruction and removal efficiency of permethrin (better than 90%) the high emission of U-POPs and CBs from the test burn is of another more serious concern. To our best knowledge the findings of this study are the first of this kind for the Southeast Asia. The findings emphasize that if not properly conducted a standard destruction technology of a non-POP chemical can lead to a release of a range of more dangerous U-POPs into the environment.     

Estimation of internal radiation dose to the adult Asian population from the dietary intakes of two long-lived radionuclides

Daily dietary intakes of two naturally occurring long-lived radionuclides, 232Th and 238U, were estimated for the adult population living in a number of Asian countries, using highly sensitive analytical methods such as instrumental and radiochemical neutron activation analysis (INAA and RNAA), and inductively coupled plasma mass spectrometry (ICP-MS). The Asian countries that participated in the study were Bangladesh (BGD), China (CPR), India (IND), Japan (JPN), Pakistan (PAK), Philippines (PHI), Republic of Korea (ROK) and Vietnam (VIE). Altogether, these countries represent more than 50% of the world population. The median daily intakes of 232Th ranged between 0.6 and 14.4 mBq, the lowest being for Philippines and the highest for Bangladesh, and daily intakes of 238U ranged between 6.7 and 62.5 mBq, lowest and the highest being for India and China, respectively. The Asian median intakes were obtained as 4.2 mBq for 232Th and 12.7 mBq for 238U. Although the Asian intakes were lower than intakes of 12.3 mBq (3.0 ug) 232Th and 23.6 mBq (1.9 ug) 238U proposed by the International Commission on Radiological Protection (ICRP) for the ICRP Reference Man, they were comparable to the global intake values of 4.6 mBq 232Th and 15.6 mBq 238U proposed by the United Nation Scientific Commission on Effects of Radiation (UNSCEAR). The annual committed effective doses to Asian population from the dietary intake of 232Th and 238U were calculated to be 0.34 and 0.20 microSv, respectively, which are three orders of magnitude lower than the global average annual radiation dose of 2400 microSv to man from the natural radiation sources as proposed by UNSCEAR.     

Exposure Programme on Atmospheric Corrosion Effects of Acidifying Pollutants in Tropical and Subtropical Climates

Many national exposure programmes have been performed in tropical and subtropical climates during the last 50 years. However, ambitious programmes involving more than a few countries are scarce. In this paper a recently formed network of test sites is described involving 12 test sites in Asia (India, Vietnam, Thailand, Malaysia and China including Hong Kong) and four test sites in Africa (South Africa, Zambia and Zimbabwe). This effort is part of the 2001–2004 Swedish International Development Agency (SIDA) funded Programme on Regional Air Pollution in Developing Countries (RAPIDC). Corrosion attack after one (2002–2003) year of exposure (carbon steel, zinc, copper, limestone and paint coated steel) are presented together with environmental data (SO₂, NO₂, HNO₃, O₃, particles, amount and pH of precipitation, temperature and relative humidity) for all the test sites. The obtained corrosion values are substantially higher than expected for limestone, higher than expected for carbon steel and lower than expected for zinc compared to values calculated using the best available dose–response functions.