Optimization, equilibrium, adsorption behavior and role of surface functional groups on graphene oxide-based nanocomposite towards diclofenac drug

Aquatic contamination of diclofenac (DCF), an emergent non-steroidal anti-inflammatory drug (NSAIDs), can result in adverse effects to many ecosystems through biomagnification. Hence, introducing effective remediation techniques to sequester the pharmaceutical wastes is highly fundamental to prevent their accumulation in the environment. Generally, adsorption has been presented as a green and efficient approach. Herein, we report the characterization and application of the novel magnetic nanocomposite ([email protected]₂O₄) derived from cobalt-based ferrite (CoFe₂O₄) and graphene oxide (GO) for DCF adsorption. For the optimization procedure, the response surface methodology (RSM) was adopted to investigate the impacts of DCF concentration (1.6–18.4 mg/L), DCF dosage (0.08–0.92 g/L), and solution pH (2.6–9.4) to find the optimum conditions for DCF removal, at 10.5 mg/L, 0.74 g/L, and pH 4, respectively. For the adsorption experiments, the kinetic, isotherm, thermodynamic, and intraparticle diffusion models were systematically studied. Moreover, we have elucidated the role of functional groups on the surface of [email protected]₂O₄ in enhancing the adsorption of DCF drug. With good removal efficiency (up to 86.1%), high maximum adsorption capacity (32.4 mg/g), [email protected]₂O₄ can be a potential candidate to eliminate DCF drug from water.     

Sorption of tylosin and sulfamethazine on solid humic acid

Tylosin(TYL) and sulfamethazine(SMT) are ionizable and polar antimicrobial compounds,which have seeped into the environment in substantial amounts via fertilizing land with manure or sewage. Sorption of TYL and SMT onto humic acid(HA) may affect their environmental fate. In this study, the sorption of TYL and SMT on HA at different conditions(pH, ionic strength) was investigated. All sorption isotherms fitted well to the Henry and Freundlich models and they were highly nonlinear with values of n between 0.5 and 0.8, which suggested that the HA had high heterogeneity. The sorption of TYL and SMT on HA decreased with increasing p H(2.0–7.5), implying that the primary sorption mechanism could be due to cation exchange interactions between TYL~+/SMT~+ species and the functional groups of HA.Increasing ionic strength resulted in a considerable reduction in the K_d values of TYL and SMT,hinting that interactions between H bonds and π–π EDA might be an important factor in the sorption of TYL and SMT on HA. Results of Fourier transform infrared(FT-IR) and ~13C-nuclear magnetic resonance(NMR) analysis further demonstrated that carboxyl groups and O-alkyl structures in the HA could interact with TYL and SMT via ionic interactions and H bonds,respectively. Overall, this work gives new insights into the mechanisms of sorption of TYL and SMT on HA and hence aids us in assessing the environmental risk of TYL and SMT under diverse conditions.     

The status and distribution of PCBs along the coast of Vietnam

Environmental Geochemistry and Health - Polychlorinated biphenyls (PCBs), well-known as an important scientific achievement, are now considered as one of the most persistent organic pollutants...     

On-site rainwater harvesting and treatment for drinking water supply: assessment of cost and technical issues

Environmental Science and Pollution Research - This study assessed the performance of rainwater-harvesting systems installed for selected public utilities in the northern provinces of Vietnam where...     

储罐工艺变更管理中的HAZOP应用

采用危险与可操作性(HAZOP)方法分析了石脑油储罐废气排放系统工艺变更的危害因素,特别对废气排放系统的控制参数,给出了逆流、超温、超压、低压/真空等偏差的HAZOP分析结果,并针对高风险的偏差提出了相应的建议措施.     

建设项目竣工环境保护验收监测报告必须阐明的内容

建设项目竣工环境保护验收监测报告是检验建设方落实环保“三同时”制度的技术手段,也是环保部门依法管理的技术支撑和依据,竣工验收监测报告除遵循行业技术规范要求外,建设内容变更、环保设施落实、污染物排放及总量、环境质量影响等成为不可或缺的重要内容,需要逐一阐述明确。     

Photochemical smog modeling for assessment of potential impacts of different management strategies on air quality of the Bangkok Metropolitan Region, Thailand

A photochemical smog model system, the Variable-Grid Urban Airshed Model/Systems Applications International Mesoscale Model (UAM-V/SAIMM), was used to investigate photochemical pollution in the Bangkok Metropolitan Region (BMR). The model system was first applied to simulate a historical photochemical smog episode of two days (January 13-14, 1997) using the 1997 anthropogenic emission database available at the Pollution Control Department and an estimated biogenic emission. The output 1-hr ozone (O3) for BMR, however, did not meet the U.S. Environmental Protection Agency suggested performance criteria. The simulated minimum and maximum O3 values in the domain were much higher than the observations. Multiple model runs with different precursor emission reduction scenarios showed that the best model performance with the simulated 1-hr O3 meeting all the criteria was obtained when the volatile organic compound (VOC) and oxides of nitrogen (NOx) emission from mobile source reduced by 50% and carbon monoxide by 20% from the original database. Various combinations of anthropogenic and biogenic emissions in Bangkok and surrounding provinces were simulated to assess the contribution of different sources to O3 pollution in the city. O3 formation in Bangkok was found to be more VOC-sensitive than NOx-sensitive. To attain the Thailand ambient air quality standard for 1-hr O3 of 100 ppb, VOC emission in BMR should be reduced by 50-60%. Management strategies considered in the scenario study consist of Stage I, Stage II vapor control, replacement of two-stroke by four-stroke motorcycles, 100% compressed natural gas bus, 100% natural gas-fired power plants, and replacement of methyltertiarybutylether by ethanol as an additive for gasoline.     

Particulate matter in the cultivation area may contaminate leafy vegetables with heavy metals above safe levels in Korea

Environmental Science and Pollution Research - Among air pollutants, particulate matter (PM) has been identified as a major cause of environmental pollutants due to the advancement of industrial...     

硫化物矿山尾矿生物氧化作用的抑制研究

硫化物矿山尾矿的风化、氧化会对周围环境产生危害,研究表明,以氧化亚铁硫杆菌为代表的嗜酸氧化菌起了非常重要的作用。本研究以从广东韶关大宝山尾矿分离得到的一株氧化亚铁硫杆菌作为实验菌株,添加不同剂量的杀菌剂,分析了杀菌剂对溶液pH、Eh值的影响,及杀菌剂的Fe2+氧化抑制率和最佳使用浓度。结果显示:实验用杀菌剂SDS和CTAB能有效地抑制金属硫化物尾矿的生物氧化和酸化:ρ(SDS)为30 mg/L时Fe2+的氧化抑制率达到82.83%;ρ(CTAB)为5 mg/L时Fe2+的氧化抑制率达到80.84%,添加了杀菌剂的溶液pH、Eh基本保持初始值不变,表明杀菌剂的使用可以控制金属硫化物尾矿的酸化污染。     

一株氧化亚铁硫杆菌的筛选及生长条件研究

从广东省大宝山矿区尾矿中分离纯化得到一株嗜酸细菌,对其进行DNA提取和16S rRNA扩增后测序,将测序结果与国际基因数据库Genbank中已有相关菌株序列进行相似性比对后,发现该菌株与氧化亚铁硫杆菌(Acidithiobacil-lus ferrooxidans)Tf-49菌位于系统发育树的同一分支中,二者相似度高达99%以上,确定其为氧化亚铁硫杆菌并命名为DBS-8菌。另外,通过设计5因素4水平的正交实验,研究了接种量、培养温度、硫酸铵浓度、初始pH和初始亚铁浓度对该菌株生长状况的影响。结果表明适宜该菌株生长的最佳初始条件为:20%的接种量、3.0 g/L硫酸铵、9.0 g/L初始亚铁、pH=2.0和28℃培养,各初始条件对细菌生长影响的顺序为:pH初始亚铁浓度接种量温度硫酸铵浓度。