Note On The Collection of Lint Fly by Wet Impingement

A combined water scrubber-impinger was used to control lint cleaner effluent from machine-stripped short staple (11/16-13/16 in.) cotton because of its high efficiency and low pressure drop. The 8 × 4 × 4 ft rectangular scrubber could handle a maximum of 8000 CFM entering air at 80°F, 20% relative humidity and 0.7 g particulates/m³ with a 1-sec residence time at a maximum pressure drop of 0.5 in. of water across the chamber. Water to the chamber’s 6 doublespray and 2 single-spray nozzle taps was supplied from recycle and makeup sources at pressures of 7.5–30 psig with total flows of 21.8–31.1 gpm depending on number of nozzle taps in use. These sprays effectively wetted the particulate- laden air and provided enough water to wash the collected particulate matter down the chamber walls. The four WR-10 nozzles used at the base of the scrubbing chamber provided fine conical spray patterns co-current with the air flow. The two sets of four F-20 nozzles used in the center portion of the chamber provided coarse flat sheet sprays perpendicular to the air flow path. Two large TR-50 nozzles at the top of the chamber provided the necessary coarse conical sprays to wash the collected particulates down the chamber wall to the trash-water separator below. Water flows through the nozzles were determined from pressure readings at each tap. Chamber pressure drop was determined by 15° inclined manometer readings taken across the chamber at the locations where the air inlet and outlet mean square velocities occurred.     

Calculating Collection Efficiencies for Electrostatic Precipitators

The body of information presented In this paper is directed to those Individuals involved In research on, or the design of, electrostatic precipitators. A model for calculating collection efficiencies— one based solely on physical principles and, as a result, one requiring no prior Information from pilot plant or field testing—has been employed to generate performance curves for twelve Industries presently using electrostatic precipitators. These industries Include the electric power, cement, pulp and paper, steel, chemical, and petroleum industries. The performance curves describe the predicted collection efficiency as a function of preclpltator length, plate-to-plate spacing and average field strength, and are presented In graphical, tabular, and equation form. Wherever literature values for a particular Industry are available, comparisons are made between the collection efficiencies generated by the new model and those based on actual preclpltator performance. The two are generally found to be In reasonable agreement.

The use of the Deufsch-Anderson model for preclpltator design Is also discussed. Results from the new model demonstrate that collection efficiency Is sensitive to particle size distribution, a complication that cannot be easily treated In the Deutsch-Ander-son equation which, In Its unmodified form, requires the use of a single representative particle size. It is concluded that the new model Is potentially a more realistic and viable approach to the prediction of collection efficiencies and as such should prove to be a valuable aid in electrostatic preclpltator design.     

Colony-level selection effects on individual and colony foraging task performance in honeybees, Apis mellifera L.

In honeybees, as in other highly eusocial species, tasks are performed by individual workers, but selection for worker task phenotypes occurs at the colony level. We investigated the effect of colony-level selection for pollen storage levels on the foraging behavior of individual honeybee foragers to determine (1) the relationship between genotype and phenotypic expression of foraging traits at the individual level and (2) how genetically based variation in worker task phenotype is integrated into colony task organization. We placed workers from lines selected at the colony level for high or low pollen stores together with hybrid workers into a common hive environment with controlled access to resources. Workers from the selected lines showed reciprocal variation in pollen and nectar collection. High-pollen-line foragers collected pollen preferentially, and low- pollen-line workers collected nectar, indicating that the two tasks covary genetically. Hybrid workers were not intermediate in phenotype, but instead showed directional dominance for nectar collection. We monitored the responses of workers from the selected strains to changes in internal (colony) and external (resource) stimulus levels for pollen foraging to measure the interaction between genotypic variation in foraging behavior and stimulus environment. Under low-stimulus conditions, the foraging group was over-represented by high-pollen-line workers. However, the evenness in distribution of the focal genetic groups increased as foraging stimuli increased. These data are consistent with a model where task choice is a consequence of genetically based response thresholds, and where genotypic diversity allows colony flexibility by providing a range of stimulus thresholds. Received: 3 May 1999 / Received in revised form: 22 December 1999 / Accepted: 23 January 2000     

iTree‐Hydro: Snow Hydrology Update For The Urban Forest Hydrology Model1

Yang, Yang, Theodore A. Endreny, and David J. Nowak, 2011. iTree‐Hydro: Snow Hydrology Update for the Urban Forest Hydrology Model. Journal of the American Water Resources Association (JAWRA) 47(6):1211–1218. DOI: 10.1111/j.1752‐1688.2011.00564.x Abstract: This article presents snow hydrology updates made to iTree‐Hydro, previously called the Urban Forest Effects—Hydrology model. iTree‐Hydro Version 1 was a warm climate model developed by the USDA Forest Service to provide a process‐based planning tool with robust water quantity and quality predictions given data limitations common to most urban areas. Cold climate hydrology routines presented in this update to iTree‐Hydro include: (1) snow interception to simulate the capture of snow by the vegetation canopy, (2) snow unloading to simulate the release of snow triggered by wind, (3) snowmelt to simulate the solid to liquid phase change using a heat budget, and (4) snow sublimation to simulate the solid to gas phase via evaporation. Cold climate hydrology routines were tested with research‐grade snow accumulation and weather data for the winter of 1996‐1997 at Umpqua National Forest, Oregon. The Nash‐Sutcliffe efficiency for open area snow accumulation was 0.77 and the Nash‐Sutcliffe efficiency for under canopy was 0.91. The USDA Forest Service offers iTree‐Hydro for urban forest hydrology simulation through http://www.iTreetools.org .     

MODELING GROUND WATER FLOW USING FLUX BOUNDARY CONDITIONS1

ABSTRACT: Determination of the boundary conditions for modeling ground water flow is a critical point especially in regional models. Normally the regional models require model areas that are greater than the given area of interest. This work focuses on the prediction of hydraulic heads in regional models using flux boundary conditions. The model uses flux boundary conditions that were estimated using a radial flow analog and Darcy's law. The regional model that is presented uses no parameter identification (inverse estimation) procedures. In the present work, the Houston area was used. The simulation of the hydrological conditions of the Chicot and Evangeline Aquifers that underlie the Houston area were made using the available information about the geological profile in the Houston region and the current information about the existing production wells. The regional model works as a forward problem. The system parameters such as hydraulic conductivity, specific storage, and hydrological stresses were specified, and the model predicts the hydraulic head. Actual data from piezometers operated by the U.S. Geological Survey (USGS) in many places throughout Houston were used as initial conditions. Some piezometric head data were generated using the regional variable theory called kriging to supply head estimates in areas where data were unavailable. The Modular Three Dimensional Finite Difference Groundwater Flow Model developed by the USGS was used to predict the hydraulic heads. The predicted ground water heads are compared to the actual data. The results show that the model performs well for locations where data were available.     

Mining and development: Are they compatible in South America?

Taking issue with the view that mining as an activity is necessarily beneficial to Third World countries, the author examines experience in South America. Possible non-beneficial aspects of mining in a developing country include its high capital intensiveness — when capital is liable to be scarce and unemployment high — and the potential for small but powerful groups, such as miners, to exercise a disproportionate influence on the political and economic life of the country. Furthermore, working conditions in many South American mines are extremely poor. Ways must be found to develop mining techniques more appropriate to developing countries.     

Approaches and initial findings of a state-sponsored research programme on population exposure to toxic substances

Summary Population exposure to toxic chemicals in the environment has become one of the most important, if not the most important, environmental issue of the 1980's. In response to finding high cancer mortality rates, the State of New Jersey organized an extensive program of research to determine public exposure to toxic substances in the environment. Three parts of that research are described. One focusing on toxic substances in the water has detected very low concentrations of many substances. These substances tend to be found in three distinct chemical groups: pesticides, light chlorinated hydrocarbons, and heavy metals. Gross pesticide contamination tends to occur in agricultural and forest areas; gross light chlorinated hydrocarbon pollution is in urban areas. The second component of the research is toxic substances in the air. Like the water studies, low levels of contamination have been found. Limited sampling to date has found groupings of ubiquitous organic chemicals in urban areas, two groups of specialized organic chemicals near industrial sites, and high lead levels near major highways. The third project is developing a computerized information bank about the use and disposal of 155 chemicals and will look for associations between industrial disposal practices and contamination of the environment.