Sex ratio manipulation in response to maternal condition in pigeons: evidence for pre-ovulatory follicle selection

A number of recent reports have documented offspring sex ratio biases in birds. However, to date the potential mechanisms that have been put forward to explain the proximate basis for these deviations are entirely speculative. Using a captive population of domestic pigeons (Columba livia domestica), I tested the hypothesis that mothers in relatively poor physical condition should overproduce daughters by manipulating maternal body condition around the time of egg laying by continuous egg removal and differing feeding regimes. During treatment, females were fed a controlled quantity of food. This, combined with the high energetic costs of repeated egg production caused a significant reduction in maternal body weight. In contrast, during control when food was available ad libitum, maternal body weight did not decline, despite repeated egg production. No significant deviation from parity was evident in the sex ratio of either the first or second eggs during control, whereas during treatment a significant female bias was evident in not only the first egg, but also in the second egg. The absence of single-egg clutches, the rarity of infertile eggs and the lack of laying delays between eggs strongly suggests that the mechanism of sex ratio adjustment in pigeons occurs prior to ovulation. The highly skewed sex-distribution within the two-egg clutches and the unexpectedly large amount of variation in the yolk weight of eggs produced during treatment (but not control) are consistent with the expectations of pre-ovulatory selective resorption of wrong sex ovarian follicles.     

Chlorinated paraffins: a review of analysis and environmental occurrence

Chlorinated paraffins (CPs), as technical mixtures of polychlorinated alkanes (PCAs), are ubiquitous in the environment. CPs tend to behave in a similar way to persistent organic pollutants (POPs), leading several countries to impose regulations on the use of CPs. In this article, we review the literature on the properties of CPs, the current analytical tools available to determine CPs in various types of environmental matrices, and concentrations found in the environment. In particular, concentrations of CPs in environmental compartments including air, water, sediments, biota, human food products and human tissues are summarized. Priorities for future research are: improvements in analytical methodologies (reducing the complexity of the analysis, producing reference materials and performing interlaboratory studies); determining background levels of chlorinated paraffins in the environment and human populations (this question should be answered using quality assured analytical tools allowing the intercomparison of data); and investigating the sources of CPs to the environment and to humans.     

Colonized beads as inoculum for marine biodegradability assessment: Application to Linear Alkylbenzene Sulfonate

An innovative biodegradation test system was developed in order to fill the current gap for cost effective and environmentally relevant tools to assess marine biodegradability. Glass beads were colonized by a biofilm in an open flow-through system of seawater with continuous pre-exposure to Linear Alkylbenzene Sulfonate (LAS) (20 μg/L). Thereafter, such colonized beads were added as inoculum in different test systems. [¹⁴C]-LAS (5–100 μg/L) was added and primary and ultimate biodegradation were assessed. The bacterial density collected on the beads (10⁹ bact./mL beads) was ca. 3 orders of magnitude higher than the typical seawater content. The LAS mineralization lag phase duration decreased from 55 to < 1 days and the mineralization extent increased from 53 to 90% as the colonized beads volume increased from 10 to 275 mL. This is the first demonstration of marine bacteria's ability to mineralize LAS. On the opposite, less than 13% LAS was mineralized in seawater only. The colonized beads possibly enhanced the probability to encounter the full degraders' consortium in a low volume of seawater (100 mL).     

Environmetrics to evaluate marine environment quality

The environmetric data analysis of analytical datasets from sediment and benthic organisms samples collected from different sampling sites along the coast of Black Sea near to City of Varna, Bulgaria has given some important indications about the bioindication properties of both type of samples. Various multivariate statistical methods like cluster analysis, principal components analysis, source apportioning modeling and partial least square (PLS) modeling were used in order to classify and interpret the parameters describing the chemical content of the coastal sediments (major components, heavy metals and total organic carbon) and benthic organisms (heavy metals). It has been shown that seriously polluted coastal zones are indicated in the same way by all benthic species, although some specificity could be detected for moderate polluted regions' e.g. polychaeta accumulated preferably Co, Cr, Cu, and Pb; crustacea - As, Cd, and Ni; mollusca - Zn. The identified latent factors responsible for the dataset structure are clearly indicated and apportioned with respect to their contribution to the total mass or total concentration of the species in the samples. The linear regression and PLS models indicated that a reliable forecast about the relation between naturally occurring chemical components and polluting species accumulated in the benthic organisms is possible.     

Thermal treatment and non-thermal technologies for remediation of manufactured gas plant sites

More than 1500 manufactured gas plant (MGP) sites exist throughout the U.S. Many are contaminated with coal tar from coal-fueled gas works which produced ‘town gas’ from the mid-1800s through the 1950s.^1,2 Virtually all old U.S. cities have such sites. Most are in downtown areas as they were installed for central distribution of manufactured gas. While a few sites are CERCLA/Superfund, most are not. However, the contaminants and methods used for remediation are similar to those used for Superfund clean-ups of coal tar contamination from wood-treating and coke oven facilities. Clean-up of sites is triggered by regulatory pressure, property transfers and re-development as well as releases to the environment — in particular, via groundwater migration. Due to utility de-regulation, site clean-ups may also be triggered by sale of a utility or of a specific utility site to other utilities. Utilities have used two approaches in dealing with their MGP sites. The first is ‘do nothing and hope for the best’. History suggests that, sooner or later, these sites become a bigger problem via a release, citizen lawsuit or regulatory/public service commission intervention. The second, far better approach is to define the problem now and make plans for waste treatment or immobilization. This paper describes recent experience with a high capacity/low cost thermal desorption process for this waste and reviews non-thermal technology, such as bio-treatment, capping, recycling, and dig and haul. Cost data is provided for all technologies, and a case study for thermal treatment is also presented.     

Industrial facility deactivation: A proactive approach for reducing costs and liabilities

For both private corporations and military branches, downsizing and consolidation are becoming more commonplace. A range of environmental concerns must be addressed to effectively implement a consolidation program. A facility deactivation program can often become a minefield for an organization. Responsible personnel are typically inexperienced with the process, and this can lead to costly mistakes. This article provides insight into this topic based on experience gained with a multifacility program and related environmental issues. It emphasizes the importance of detailed, up-front, proactive project planning; a solid program management system; and accurate identification of project objectives and deliverables.     

Review of LCA studies of solid waste management systems – Part II: Methodological guidance for a better practice

Life cycle assessment (LCA) is increasingly used in waste management to identify strategies that prevent or minimise negative impacts on ecosystems, human health or natural resources. However, the quality of the provided support to decision- and policy-makers is strongly dependent on a proper conduct of the LCA. How has LCA been applied until now? Are there any inconsistencies in the past practice? To answer these questions, we draw on a critical review of 222 published LCA studies of solid waste management systems. We analyse the past practice against the ISO standard requirements and the ILCD Handbook guidelines for each major step within the goal definition, scope definition, inventory analysis, impact assessment, and interpretation phases of the methodology. Results show that malpractices exist in several aspects of the LCA with large differences across studies. Examples are a frequent neglect of the goal definition, a frequent lack of transparency and precision in the definition of the scope of the study, e.g. an unclear delimitation of the system boundaries, a truncated impact coverage, difficulties in capturing influential local specificities such as representative waste compositions into the inventory, and a frequent lack of essential sensitivity and uncertainty analyses. Many of these aspects are important for the reliability of the results. For each of them, we therefore provide detailed recommendations to practitioners of waste management LCAs.     

IMPACTS OF CLIMATE CHANGE ON MISSOURI RWER BASIN WATER YIELD1

ABSTRACT: Water from the Missouri River Basin is used for multiple purposes. The climatic change of doubling the atmospheric carbon dioxide may produce dramatic water yield changes across the basin. Estimated changes in basin water yield from doubled CO₂ climate were simulated using a Regional Climate Model (RegCM) and a physically based rainfall‐runoff model. RegCM output from a five‐year, equilibrium climate simulation at twice present CO₂ levels was compared to a similar present‐day climate run to extract monthly changes in meteorologic variables needed by the hydrologic model. These changes, simulated on a 50‐km grid, were matched at a commensurate scale to the 310 subbasin in the rainfall‐runoff model climate change impact analysis. The Soil and Water Assessment Tool (SWAT) rainfall‐runoff model was used in this study. The climate changes were applied to the 1965 to 1989 historic period. Overall water yield at the mouth of the Basin decreased by 10 to 20 percent during spring and summer months, but increased during fall and winter. Yields generally decreased in the southern portions of the basin but increased in the northern reaches. Northern subbasin yields increased up to 80 percent: equivalent to 1.3 cm of runoff on an annual basis.     

Emerging technology for increasing glucosinolates in arugula and mustard greens

Two plant species, arugula (Eruca sativa) and mustard (Brassica juncea) were field-grown under four soil management practices: soil mixed with municipal sewage sludge (SS), soil mixed with horse manure (HM), soil mixed with chicken manure (CM), and no-mulch bare soil (NM) to investigate the impact of soil amendments on the concentration of glucosinolates (GSLs) in their shoots. GSLs, hydrophilic plant secondary metabolites in arugula and mustard were extracted using boiling methanol and separated by adsorption on sephadex ion exchange disposable pipette tips filled with DEAE, a weak base, with a net positive charge that exchange anions such as GSLs. Quantification of GSLs was based on inactivation of arugula and mustard myrosinase and liberation of the glucose moiety from the GSLs molecule by addition of standardized myrosinase (thioglucosidase) and spectrophotometric quantification of the liberated glucose moiety. Overall, GSLs concentrations were significantly greater (1287 µg g^?1 fresh shoots) in plants grown in SS compared to 929, 890, and 981 µg g^?1 fresh shoots in plants grown in CM, HM, and NM soil, respectively. Results also revealed that mustard shoots contained greater concentrations of GSLs (974 µg g^?1 fresh shoots) compared to arugula (651 µg g^?1 fresh shoots).     

Achieving uniform regulation of environmental lead exposure and poisoning in wildlife and humans

Lead from spent ammunition causes preventable lead exposure in wildlife and humans that may ingest it. Nontoxic substitutes for lead ammunition exist but are not adopted widely because of hunter opposition. Other forms of lead exposure in the human environment have been heavily regulated because there is no safe level of exposure. The use of lead ammunition should be regulated similarly to protect wildlife from this common disease.