Urban transformation of a metropolis and its environmental impacts

Purpose

The aim of this paper is to understand the sustainability of urban spatial transformation in the process of rapid urbanization, and calls for future research on the demographic and economic dimensions of climate change. Shanghai towards its transformation to a metropolis has experienced vast socioeconomic and ecological change and calls for future research on the impacts of demographic and economic dimensions on climate change. We look at the major questions (1) to explore economic and demographic growth, land use and land-cover changes in the context of rapid economic and city growth, and (2) to analyze how the demography and economic growth have been associated with the local air temperature and vegetation.

Method

We examine urban growth, land use and land-cover changes in the context of rapid economic development and urbanization. We assess the impact of urban expansion on local air temperature and vegetation. The analysis is based on time series data of land use, normalized difference vegetation index (NDVI), and meteorological, demographic and economic data.

Results and discussion

The results indicate that urban growth has been driven by mass immigration; as a consequence of economic growth and urban expansion, a large amount of farmland has been converted to paved road and residential buildings. Furthermore, the difference between air temperature in urban and exurban areas has increased rapidly. The decrease of high mean annual NDVI has mainly occurred around the dense urban areas.     

Effect of humic acids on physicochemical property and Cd(II) sorption of multiwalled carbon nanotubes

Zinc pyrithione is used as an antifouling agent. However, the environmental impacts of zinc pyrithione have recently been of concern. Zinc induces diverse actions during oxidative stress; therefore, we examined the effect of zinc pyrithione on rat thymocytes suffering from oxidative stress using appropriate fluorescent probes. The cytotoxicity of zinc pyrithione was not observed when the cells were incubated with 3 μM zinc pyrithione for 3 h. However, zinc pyrithione at nanomolar concentrations (10 nM or more) significantly increased the lethality of cells suffering from oxidative stress induced by 3 mM H₂O₂. The application of zinc pyrithione alone at nanomolar concentrations increased intracellular Zn²⁺ level and the cellular content of superoxide anions, and decreased the cellular content of nonprotein thiols. The simultaneous application of nanomolar zinc pyrithione and micromolar H₂O₂ synergistically increased the intracellular Zn²⁺ level. Therefore, zinc pyrithione at nanomolar concentrations may exert severe cytotoxic action on cells simultaneously exposed to chemicals that induce oxidative stress. If so, zinc pyrithione leaked from antifouling materials into surrounding environments would be a risk factor for aquatic ecosystems. Alternatively, zinc pyrithione under conditions of oxidative stress may become more potent antifouling ingredient.     

Ozonation as an advanced oxidant in treatment of bamboo industry wastewater

The present study employed ozonation process to treat the bamboo industry wastewater (BIWW). The impact of ozone dosage and initial organic concentration on color, COD and TOC removal rates were studied along with characterization of the major organics in raw and treated wastewater. The results suggested the ozone dosage of 3.15 g h⁻¹ (concentration 52.5 mg L⁻¹) was suitable for the treatment. After 25 min ozonation of 1 L raw wastewater, the color, COD and TOC removal efficiencies were 95%, 56% and 40%, respectively, with an influent COD concentration of 835 mg L⁻¹. The ratio of kg O₃ kg⁻¹ COD at 3.15 g h⁻¹ was 2.8 (<3), revealing that ozonation was a cost effective process for tertiary treatment of BIWW. Longer oxidization time was required to achieve similar results for raw wastewater with higher COD concentration. The chromatogram from gel permeation chromatography revealed that ozonation resulted in the breakdown of high molecular weight compounds into lower molecular weight components but could not completely mineralize the organic matter. The majority of these compounds were identified in both raw and ozonated samples via GC-MS analysis. In addition to ester derivatives as the main intermediates of ozonation, 1-chloroctadecane, methyl stearate, benzophenone and α-cyperone were identified as the by-products of ozonation.     

Emission characterization of unintentionally produced persistent organic pollutants from iron ore sintering process in China

Emission of unintentionally produced persistent organic pollutants (Unintentional POPs), including polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), polychorinated biphenyls (PCBs), hexachlorobenzene (HxCBz) and pentachlorobenzene (PeCBz), were investigated in four typical iron ore sintering plants in China. The emission factors and annual mass releases of the Unintentional POPs were calculated. The results indicated that PCDFs contributed more than 60% to the overall toxic equivalent quantity (TEQ) values, while the contribution of the dl-PCBs is relatively low, and only in the range of 8-9%. The dominant congeners of PCDD/Fs and dl-PCBs contributing most to the total TEQ were 1,2,3,7,8-PeCDD, 2,3,4,7,8-PeCDF and PCB-126. With regard to the TEQ contributions, the most abundant homologues were PeCDFs and HxCDD/Fs, followed by PeCDDs and non-ortho dl-PCB, whereas HpCDD/Fs, OCDD/Fs and mono-ortho dl-PCBs almost made no contributions. Due to the massive use of recycled waste in the feeding materials, the average emission factor of PCDD/Fs and dl-PCBs of the four plants was 3.95 μg WHO-TEQ ton⁻¹. Based on the results, the annual release of PCDD/Fs and dl-PCBs in 2007-2009 were estimated to be 2070 g, 2212 g, and 2307 g WHO-TEQ, respectively.     

SO2-4/TiO2光催化降解苯酚

以工业硫酸氧钛为原料水解制得SO42-/TiO2光催化剂,并以苯酚为目标降解物,考察了SO24-/TiO2的光催化性能。结果表明:随着SO42-/TiO2制备过程中焙烧温度的升高,其光催化活性逐渐增加,650℃焙烧获得的SO24-/TiO2的光催化活性最好,此后再升高温度会因催化剂中硫的挥发而下降;在确定苯酚原液初始浓度为50 mg/L条件下,SO42-/TiO2的光催化降解苯酚的最佳工艺条件为反应时间2 h、苯酚pH为7、催化剂用量1 g/L。XRD、SEM和FTIR的分析结果显示实验温度下制得的SO42-/TiO2均为锐钛型TiO2;其间掺杂的SO24-在TiO2表面分散性较好,没有聚集成大的颗粒;红外分析的结果初步判定低温(<550℃)焙烧制得的催化剂SO42-在TiO2表面是螯合双配位吸附,高温焙烧时(>550℃)SO42-在TiO2表面是桥式配位吸附。     

Evaluation of nitrification inhibitor 3,4-dimethyl pyrazole phosphate on nitrogen leaching in undisturbed soil columns

The application of nitrogen fertilizers leads to various ecological problems such as nitrate leaching. The use of nitrification inhibitors (NI) as nitrate leaching retardants is a proposal that has been suggested for inclusion in regulations in many countries. In this study, the efficacy of the new NI, 3,4-dimethyl pyrazole phosphate (DMPP), was tested under simulated high-risk leaching situations in two types of undisturbed soil columns. The results showed that the accumulative leaching losses of soil nitrate under treatment of urea with 1.0% DMPP, from columns of silt loam soil and heavy clay soil, were 66.8% and 69.5% lower than those soil columns tested with regular urea application within the 60 days observation, respectively. However, the losses of ammonium leaching were reversely increased 9.7% and 6.7% under the former treatment than the latter one. Application of regular urea with 1.0% DMPP addition can reduce about 59.3%-63.1% of total losses of inorganic nitrogen via leaching. The application of DMPP to urea had stimulated the inhibition effects of DMPP on the ammonium nitrification process in the soil up to 60 days. It is proposed that the DMPP could be used as an effective NI to control inorganic N leaching losses, minimizing the risk of nitrate pollution in shallow groundwater.     

渗滤液回流对不同填埋结构甲烷变化规律的影响研究

建立了大型模拟填埋试验装置,研究了渗滤液回流对不同填埋结构甲烷变化规律的影响.每周对填埋气体中甲烷浓度进行监测.结果表明:厌氧填埋中回流操作使甲烷浓度峰值提前了147 d,峰值为59.6%(体积分数,下同);准好氧填埋中回流操作使甲烷浓度峰值提前259 d,峰值为44.7%.回流操作使甲烷产气高峰提前,增加产气量,加快填埋垃圾稳定,减轻渗滤液污染.厌氧填埋中进行回流操作有利于甲烷的回收利用;准好氧填埋结构可有效减少甲烷的排放,减小对环境的危害.稳定期的垃圾填埋体进行回流产生一定的甲烷,但浓度较低,最高仅26.0%,没有利用价值.     

苇浆造纸黑液的Fenton预处理研究

采用Fenton试剂预处理高浓度苇浆造纸黑液,经正交设计得出各因素对黑液COD去除率的影响顺序为:pH＞[H2O2]＞[Fe2 ]＞反应时间.确定最佳操作条件为:初始pH=4、[H2O2]=0.088 mol/L、[Fe2 ]=14.39 mmol/L、反应40 min,此条件下废水COD去除率可达80%以上,色度及浊度去除率达96%.动力学表明:Fenton试剂预处理高浓度苇浆造纸黑液的表观过程近似符合一级反应规律.废水经处理后可生化性指标BOD/COD平均从0.303升高到0.558.     

UASB处理畜禽废水的氨化率研究

因畜禽废水除了含有大量的有机物，还含有一定量的氨基酸，因此，研究利用UASB处理畜禽废水，在不同环境条件和工况条件下对氨化率的影响，结果表明：氨化菌适应的pH值范围较宽，在6．5—8．0范围均可以较好的生存，其中以7．0为最佳；温度与氨化率基本成正相关关系，从经济等多种角度考虑，中温阶段38％为最适宜；氨化率随进水浓度的增加而增加；进水有机负荷越大，氨化率越小。     

Influence of the DMPP (3,4-dimethyl pyrazole phosphate) on nitrogen transformation and leaching in multi-layer soil columns

The application of nitrogen fertilizers leads to various ecological problems such as nitrate leaching. The use of nitrification inhibitors as nitrate leaching retardants is a proposal that has been suggested for inclusion in regulations in many countries. In this study, using a multi-layer soil column device, the influence of new nitrification inhibitor DMPP (3,4-dimethyl pyrazole phosphate) was studied for understanding the nitrogen vertical transformation and lowering the nitrate leaching at different soil profile depths. The results indicated that, within 60 d of experiment, the regular urea added 1.0% DMPP can effectively inhibit the ammonium oxidation in the soil, and improve the ammonium concentration in soil solution over the 20cm depths of soil profile, while decline the concentrations of nitrate and nitrite. No obvious difference was found on ammonium concentrations in soil solution collected from deep profile under 20cm depths between regular urea and the urea added 1.0% DMPP. There was also no significant difference for the nitrate, ammonium and nitrite concentrations in the soil solution under 40cm depths of soil profile with the increasing nitrogen application level, among the treatments of urea added 1.0% DMPP within 60 d. It is proposed that DMPP could be used as an effective nitrification inhibitor in some region to control ammonium oxidation and decline the ion-nitrogen leaching, minimizing the shallow groundwater pollution risk and being beneficial for the ecological environment.