Effects of field storage method on <Emphasis Type="Italic">E. coli</Emphasis> concentrations measured in storm water runoff

Storm water runoff is increasingly assessed for fecal indicator organisms (e.g., Escherichia coli, E. coli) and its impact on contact recreation. Concurrently, use of autosamplers along with logistic, economic, technical, and personnel barriers is challenging conventional protocols for sample holding times and storage conditions in the field. A common holding time limit for E. coli is 8 h with a 10 °C storage temperature, but several research studies support longer hold time thresholds. The use of autosamplers to collect E. coli water samples has received little field research attention; thus, this study was implemented to compare refrigerated and unrefrigerated autosamplers and evaluate potential E. coli concentration differences due to field storage temperature (storms with holding times ≤24 h) and due to field storage time and temperature (storms >24 h). Data from 85 runoff events on four diverse watersheds showed that field storage times and temperatures had minor effects on mean and median E. coli concentrations. Graphs and error values did, however, indicate a weak tendency for higher concentrations in the refrigerated samplers, but it is unknown to what extent differing die-off and/or regrowth rates, heterogeneity in concentrations within samples, and laboratory analysis uncertainty contributed to the results. The minimal differences in measured E. coli concentrations cast doubt on the need for utilizing the rigid conventional protocols for field holding time and storage temperature. This is not to say that proper quality assurance and quality control is not important but to emphasize the need to consider the balance between data quality and practical constraints related to logistics, funding, travel time, and autosampler use in storm water studies.     

Toxicity of the mixture of selected antineoplastic drugs against aquatic primary producers

The residues of antineoplastic drugs are considered as new and emerging pollutants in aquatic environments. Recent experiments showed relatively high toxicity of 5-fluorouracil (5-FU), imatinib mesylate (IM), etoposide (ET) and cisplatin (CP) that are currently among most widely used antineoplastic drugs, against phytoplankton species. In this study, we investigated the toxic potential of the mixture of 5-FU?+?IM?+?ET against green alga Pseudokirchneriella subcapitata and cyanobacterium Synechococcus leopoliensis, and the stability and sorption of these drugs to algal cells. Toxic potential of the mixture was predicted by the concepts of ‘concentration addition’ and ‘independent action’ and compared to the experimentally determined toxicity. In both test species, the measured toxicity of the mixture was at effects concentrations EC₁₀–EC₅₀ higher than the predicted, whereas at higher effect concentration (EC₉₀), it was lower. In general, P. subcapitata was more sensitive than S. leopoliensis. The stability studies of the tested drugs during the experiment showed that 5-FU, IM and CP are relatively stable, whereas in the cultures exposed to ET, two transformation products with the same mass as ET but different retention time were detected. The measurements of the cell-linked concentrations of the tested compounds after 72 h exposure indicated that except for CP (1.9 % of the initial concentration), these drugs are not adsorbed or absorbed by algal cells. The results of this study showed that in alga and cyanobacteria exposure to the mixture of 5-FU?+?ET?+?IM, in particular at low effect concentration range, caused additive or synergistic effect on growth inhibition, and they suggest that single compound toxicity data are not sufficient for the proper toxicity prediction for aquatic primary producers.     

Fate of citalopram during water treatment with O3, ClO2, UV and Fenton oxidation

In the present study we investigate the fate of citalopram (CIT) at neutral pH using advanced water treatment technologies that include O₃, ClO₂ oxidation, UV irradiation and Fenton oxidation. The ozonation resulted in 80% reduction after 30 min treatment. Oxidation with ClO₂ removed >90% CIT at a dosage of 0.1 mg L⁻¹. During UV irradiation 85% reduction was achieved after 5 min, while Fenton with addition of 14 mg L⁻¹ (Fe²⁺) resulted in 90% reduction of CIT. During these treatment experiments transformation products (TPs) were formed from CIT, where five compounds were identified by using high resolution and tandem mass spectrometry. Among these desmethyl-citalopram and citalopram N-oxide have been previously identified as human metabolites, while three are novel and published here for the first time. The three TPs are a hydroxylated dimethylamino-side chain derivative, a butyrolactone derivative and a defluorinated derivative of CIT.     

Water mass interaction in the confluence zone of the Daning River and the Yangtze River—a driving force for algal growth in the Three Gorges Reservoir

Increasing eutrophication and algal bloom events in the Yangtze River Three Gorges Reservoir, China, are widely discussed with regard to changed hydrodynamics and nutrient transport and distribution processes. Insights into water exchange and interaction processes between water masses related to large-scale water level fluctuations in the reservoir are crucial to understand water quality and eutrophication dynamics. Therefore, confluence zones of tributaries with the Yangtze River main stream are dedicated key interfaces. In this study, water quality data were recorded in situ and on-line in varying depths with the MINIBAT towed underwater multi-sensor system in the confluence zone of the Daning River and the Yangtze River close to Wushan City during 1 week in August 2011. Geostatistical evaluation of the water quality data was performed, and results were compared to phosphorus contents of selective water samples. The strongly rising water level throughout the measurement period caused Yangtze River water masses to flow upstream into the tributary and supply their higher nutrient and particulate loads into the tributary water body. Rapid algal growth and sedimentation occurred immediately when hydrodynamic conditions in the confluence zone became more serene again. Consequently, water from the Yangtze River main stream can play a key role in providing nutrients to the algal bloom stricken water bodies of its tributaries.     

Paint Company Beats Odor and Fume Problem With Special Measures

Government at all levels is placing increasing emphasis on air pollution control. To avoid restrictive legislation, to maintain good public relations, and to assume its full share of responsibility are constantly on the alert for air pollution control equipment designed for specified needs. The problems connected with the collection or disposal of fumes and vapors liberated during various types of industrial kettle cooking operations has been of serious concern in a number of cities in recent years.     

The Aerosol Research and Inhalation Epidemiology Study (ARIES): PM25 Mass and Aerosol Component Concentrations and Sampler Intercomparisons

ABSTRACT

The Aerosol Research and Inhalation Epidemiology Study (ARIES) was designed to provide high-quality measurements of PM₂₅, its components, and co-varying pollutants for an air pollution epidemiology study in Atlanta, GA.

Air pollution epidemiology studies have typically relied on available data on particle mass often collected using filter-based methods. Filter-based PM_2.5 sampling is susceptible to both positive and negative errors in the measurement of aerosol mass and particle-phase component concentrations in the undisturbed atmosphere. These biases are introduced by collection of gas-phase aerosol components on the filter media or by volatilization of particle phase components from collected particles. As part of the ARIES, we collected daily 24-hr PM_2.5 mass and speciation samples and continuous PM_2.5 data at a mixed residential-light industrial site in Atlanta. These data facilitate analysis of the effects of a wide variety of factors on sampler performance. We assess the relative importance of PM_2.5 components and consider associations and potential mechanistic linkages of PM_2.5 mass concentrations with several PM_2.5 components.

For the 12 months of validated data collected to date (August 1, 1998-July 31, 1999), the monthly average Federal Reference Method (FRM) PM_{2 5} mass always exceeded the proposed annual average standard (12-month average = 20.3 ± 9.5 ug/m³). The particulate SO₄ ^2- fraction (as (NH₄)₂SO₄) was largest in the summer and exceeded 50% of the FRM mass. The contribution of (NH₄)₂SO₄ to FRM PM_2.5 mass dropped to less than 30% in winter. Particu-late NO₃ ^- collected on a denuded nylon filter averaged 1.1 ± 0.9 ug/m³. Particle-phase organic compounds (as organic carbon × 1.4) measured on a denuded quartz filter sampler averaged 6.4 ± 3.1 ug/m³ (32% of FRM PM_{2 5} mass) with less seasonal variability than SO₄ ^2-.     

Risk factors for increased BTEX exposure in four Australian cities

Benzene, toluene, ethylbenzene and xylenes (BTEX) are common volatile organic compounds (VOCs) found in urban airsheds. Elevated levels of VOCs have been reported in many airsheds at many locations, particularly those associated with industrial activity, wood heater use and heavy traffic. Exposure to some VOCs has been associated with health risks. There have been limited investigations into community exposures to BTEX using personal monitoring to elucidate the concentrations to which members of the community may be exposed and the main contributors to that exposure. In this cross sectional study we investigated BTEX exposure of 204 non-smoking, non-occupationally exposed people from four Australian cities. Each participant wore a passive BTEX sampler over 24h on five consecutive days in both winter and summer and completed an exposure source questionnaire for each season and a diary for each day of monitoring. The geometric mean (GM) and range of daily BTEX concentrations recorded for the study population were benzene 0.80 (0.04-23.8 ppb); toluene 2.83 (0.03-2120 ppb); ethylbenzene 0.49 (0.03-119 ppb); and xylenes 2.36 (0.04-697 ppb). A generalised linear model was used to investigate significant risk factors for increased BTEX exposure. Activities and locations found to increase personal exposure included vehicle repair and machinery use, refuelling of motor vehicles, being in an enclosed car park and time spent undertaking arts and crafts. A highly significant difference was found between the mean exposures in each of the four cities, which may be explained by differences in fuel composition, differences in the mix and density of industry, density of motor vehicles and air pollution meteorology.