In vitro biotransformation of PBDEs by root crude enzyme extracts: Potential role of nitrate reductase (NaR) and glutathione S-transferase (GST) in their debromination

In order to investigate the enzyme transformation of PBDEs and to track the key enzymes involved in PBDE degradation in plants, in vivo exposure of plants of ryegrass, pumpkin and maize and in vitro exposure of their root crude enzyme extracts to PBDEs were conducted. Degradation of PBDEs in the root crude enzyme solutions fit well with the first order kinetics (R² = 0.52–0.97, P < 0.05), and higher PBDEs degraded faster than the lower ones. PBDEs could be transformed to lower brominated PBDEs and hydroxylated-PBDEs by the root crude enzyme extracts with debromination as the main pathway which contributed over 90% of PBDE depletion. In vitro and in vivo exposure to PBDEs produced similar responses in root enzyme activities of which the nitroreductase (NaR) and glutathione-transferase (GST) activities decreased significantly, while the peroxidase, catalase and cytochrome P-450 activities had no significant changes. Furthermore, higher enzyme concentrations of NaR and GST led to higher PBDE debromination rates, and the time-dependent activities of NaR and GST in the root crude enzyme extracts were similar to the trends of PBDE depletion. All these results suggest that NaR and GST were the key enzymes responsible for PBDE degradation. This conclusion was further confirmed by the in vitro debromination of PBDEs with the commercial pure NaR and GST.     

A comparison of statistical methods for deriving freshwater quality criteria for the protection of aquatic organisms

Species sensitivity distributions (SSDs) are increasingly used in both ecological risk assessment and derivation of water quality criteria. However, there has been debate about the choice of an appropriate approach for derivation of water quality criteria based on SSDs because the various methods can generate different values. The objective of this study was to compare the differences among various methods. Data sets of acute toxicities of 12 substances to aquatic organisms, representing a range of classes with different modes of action, were studied. Nine typical statistical approaches, including parametric and nonparametric methods, were used to construct SSDs for 12 chemicals. Water quality criteria, expressed as hazardous concentration for 5 % of species (HC₅), were derived by use of several approaches. All approaches produced comparable results, and the data generated by the different approaches were significantly correlated. Variability among estimates of HC₅ of all inclusive species decreased with increasing sample size, and variability was similar among the statistical methods applied. Of the statistical methods selected, the bootstrap method represented the best-fitting model for all chemicals, while log-triangle and Weibull were the best models among the parametric methods evaluated. The bootstrap method was the primary choice to derive water quality criteria when data points are sufficient (more than 20). If the available data are few, all other methods should be constructed, and that which best describes the distribution of the data was selected.     

Adsorption of multi-heavy metals Zn and Cu onto surficial sediments: modeling and adsorption capacity analysis

Improved multiple regression adsorption models (IMRAMs) was developed to estimate the adsorption capacity of the components [Fe oxides (Fe), Mn oxides (Mn), organic materials (OMs), residuals] in surficial sediments for multi-heavy metal Zn and Cu. IMRAM is an improved version over MRAM, which introduces a computer program in the model developing process. As MRAM, Zn(Cu) IMRAM, and Cu(Zn) IMRAM again confirmed that there is significant interaction effects that control the adsorption of compounded Zn and Cu, which was neglected by additional adsorption model. The verification experiment shows that the relative deviation of the IMRAMs is less than 13 %. It is revealed by the IMRAMs that Mn, which has the greatest adsorption capability for compounded Zn and Cu (54.889 and 161.180 mg/l, respectively), follows by interference adsorption capacity of Fe/Mn (?1.072 and ?24.591 mg/l respectively). Zn and Cu influence each other through different mechanisms. When Zn is the adsorbate, compounded Cu mainly affects the adsorption capacities of Fe/Mn and Fe/Mn/OMs; while when Cu is the adsorbate, compounded Zn mainly exerts its effect on Mn, Fe/Mn, and Mn/OMs. It also shows that the compounded Zn or Cu weakened the interference adsorption of Fe/Mn, and meanwhile, strengthened the interference adsorption of Mn/OMs.     

Physicochemical and biological quality of soil in hexavalent chromium-contaminated soils as affected by chemical and microbial remediation

Chemical and microbial methods are the main remediation technologies for chromium-contaminated soil. These technologies have progressed rapidly in recent years; however, there is still a lack of methods for evaluating the chemical and biological quality of soil after different remediation technologies have been applied. In this paper, microbial remediation with indigenous bacteria and chemical remediation with ferrous sulphate were used for the remediation of soils contaminated with Cr(VI) at two levels (80 and 1,276 mg kg^?1) through a column leaching experiment. After microbial remediation with indigenous bacteria, the average concentration of water-soluble Cr(VI) in the soils was reduced to less than 5.0 mg kg^?1. Soil quality was evaluated based on 11 soil properties and the fuzzy comprehensive assessment method, including fuzzy mathematics and correlative analysis. The chemical fertility quality index was improved by one grade using microbial remediation with indigenous bacteria, and the biological fertility quality index increased by at least a factor of 6. Chemical remediation with ferrous sulphate, however, resulted in lower levels of available phosphorus, dehydrogenase, catalase and polyphenol oxidase. The result showed that microbial remediation with indigenous bacteria was more effective for remedying Cr(VI)-contaminated soils with high pH value than chemical remediation with ferrous sulphate. In addition, the fuzzy comprehensive evaluation method was proven to be a useful tool for monitoring the quality change in chromium-contaminated soils.     

Comparative quantification of oxygen release by wetland plants: electrode technique and oxygen consumption model

Understanding oxygen release by plants is important to the design of constructed wetlands for wastewater treatment. Lab-scale systems planted with Phragmites australis were studied to evaluate the amount of oxygen release by plants using electrode techniques and oxygen consumption model. Oxygen release rate (0.14 g O₂/m²/day) measured using electrode techniques was much lower than that (3.94–25.20 gO₂/m²/day) calculated using the oxygen consumption model. The results revealed that oxygen release by plants was significantly influenced by the oxygen demand for the degradation of pollutants, and the oxygen release rate increased with the rising of the concentration of degradable materials in the solution. The summary of the methods in qualifying oxygen release by wetland plants demonstrated that variations existed among different measuring methods and even in the same measuring approach. The results would be helpful for understanding the contribution of plants in constructed wetlands toward actual wastewater treatment.     

Dioxin-like activity in sediments from Tai Lake, China determined by use of the H4IIE-luc bioassay and quantification of individual AhR agonists

Deterioration of the general ecosystem and specifically quality of the water in Tai Lake (Ch: Taihu), the third largest freshwater in China, is of great concern. However, knowledge on status and trends of dioxin-like compounds in Tai Lake was limited. This study investigated AhR-mediated potency and quantified potential aryl hydrocarbon receptor (AhR) agonists in sediments from four regions (Meiliang Bay, Zhushan Lake, Lake Center, Corner of Zhushan Lake, and Meiliang Bay) of Tai Lake by use of the in vitro H4IIE-luc, cell-based, transactivation, reporter gene assay, and instrumental analysis. Concentrations of 2,3,7,8-tetrachlorodibenzo-p-dioxin equivalents (Bio-TEQs) in sediments ranged from less than the limit of detection to 114.5 pg/g, dry weight, which indicated that organic extracts of sediments exhibited significant AhR-mediated potencies. Results of the potency balance analysis demonstrated that acid-labile, dioxin-like compounds represented a greater proportion of concentrations of Bio-TEQs in sediments from Tai Lake. Concentrations of 2,3,7,8-tetrachlorodibenzo-p-dioxin equivalents calculated as the sum of the product of concentrations of individual congeners and their respective relative potencies (Chem-TEQs) based on polycyclic aromatic hydrocarbons and/or polychlorinated biphenyls represented no more than 10 % of the total concentrations of Bio-TEQs.     

Enhanced electrokinetic remediation of lead-contaminated soil by complexing agents and approaching anodes

Optimizing process parameters that affect the remediation time and power consumption can improve the treatment efficiency of the electrokinetic remediation as well as determine the cost of a remediation action. Lab-scale electrokinetic remediation of Pb-contaminated soils was investigated for the effect of complexant ethylenediaminetetraacetic acid (EDTA) and acetic acid and approaching anode on the removal efficiency of Pb. When EDTA was added to the catholyte, EDTA dissolved insoluble Pb in soils to form soluble Pb–EDTA complexes, increasing Pb mobility and accordingly removal efficiency. The removal efficiency was enhanced from 47.8 to 61.5 % when the EDTA concentration was increased from 0.1 to 0.2 M, showing that EDTA played an important role in remediation. And the migration rate of Pb was increased to 72.3 % when both EDTA and acetic acid were used in the catholyte. The “approaching anode electrokinetic remediation” process in the presence of both EDTA and acetic acid had a higher Pb-removal efficiency with an average efficiency of 83.8 %. The efficiency of electrokinetic remediation was closely related to Pb speciation. Exchangeable and carbonate-bounded Pb were likely the forms which could be removed. All results indicate that the approaching anode method in the presence of EDTA and acetic acid is an advisable choice for electrokinetic remediation of Pb-contaminated soil.     

气升回流一体化工艺处理生活污水简

针对分散型生活污水处理开发了气升回流一体化工艺,以校园生活污水为对象,研究其对生活污水中污染物的去除效果。该系统由好氧区、厌氧区、沉淀区和气升室组成,以曝气的剩余气体的气升作用实现混合液的回流,节省动力消耗。结果表明,本工艺对COD、氨氮及悬浮物（SS）有较好的去除效果,去除率分别达到80%、90%和75%左右,出水COD、NH₄⁺-N及SS平均浓度在40 mg/L、6.5 mg/L和10 mg/L左右。当进水COD在100~1 000 mg/L之间波动时,出水水质稳定。该工艺有较强的抗冲击负荷能力,且可实现剩余污泥的自消解。本工艺具有结构紧凑、占地少,运行费用低,维护简单的特点。     

3种生物质炭对活性艳蓝KN-R的吸附简

选择由玉米秸秆、稻壳和稻草秸秆在825℃制成的生物质炭作为吸附剂,通过模拟实验,研究其对溶液中活性艳蓝KN-R的吸附特性,考察了pH值、时间、溶液初始浓度和生物质炭用量对吸附效果的影响。结果表明,当pH为2.0时,玉米秸秆炭和稻壳炭对活性艳蓝的吸附量均达到最大,而pH对稻草秸秆炭的影响不大;三者达到吸附平衡的时间分别为180、300和360 min,最大吸附量分别为114.05、54.60和68.19 mg/g。等温吸附过程可以用Langmuir方程来描述;动力学实验表明,吸附过程更符合拟二级动力学模型;热力学数据分析发现,吸附过程是自发进行的吸热过程。     

煤基腐殖酸对外源砷胁迫下玉米生长及生理性状的影响简

为了筛选用于砷污染土壤治理的煤基腐殖酸,采用盆栽实验研究了施用不同种类和浓度的煤基腐殖酸及EDTA对外源砷胁迫下玉米株高、株鲜重、株干重、根干重、砷积累量、叶片抗氧化酶（POD,SOD和CAT）活性和脯氨酸含量的影响。结果表明,11种供试煤基腐殖酸均促进了玉米生长,提高了叶片POD、SOD和CAT活性。其中6和10号腐殖酸可降低土壤砷活性和显著抑制玉米吸收和积累砷,而8和9号腐殖酸增加了土壤活性砷和显著促进了玉米对砷的吸收和累积,且不同程度地强于EDTA。除8和9号外,其余腐殖酸均可明显降低玉米叶片脯氨酸的含量。EDTA可显著促进玉米吸收和积累砷,且加剧了砷对玉米的危害。因此,8和9号供试煤基腐殖酸可以替代EDTA活化土壤砷,与植物配合以提高砷污染土壤的植物修复速度和效果,而6和10号供试煤基腐殖酸则可用于土壤砷钝化剂,以保证作物产品的安全。