An Assessment of the Emissions Inventory Processing Systems EMS-2001 and SMOKE in Grid-Based Air Quality Models

Abstract

In the United States, emission processing models such as Emissions Modeling System-2001 (EMS-2001), Emissions Preprocessor System-Version 2.5 (EPS2.5), and the Sparse Matrix Operator Kernel Emissions (SMOKE) model are currently being used to generate gridded, hourly, speciated emission inputs for urban and regional-scale photochemical models from aggregated pollutant inventories. In this study, two models, EMS-2001 and SMOKE, were applied with their default internal data sets to process a common inventory database for a high ozone (O₃) episode over the eastern United States using the Carbon Bond IV (CB4) chemical speciation mechanism. A comparison of the emissions processed by these systems shows differences in all three of the major processing steps performed by the two models (i.e., in temporal allocation, spatial allocation, and chemical speciation). Results from a simulation with a photochemical model using these two sets of emissions indicate differences on the order of ±20 ppb in the predicted 1-hr daily maximum O₃ concentrations. It is therefore critical to develop and implement more common and synchronized temporal, spatial, and speciation cross-reference systems such that the processes within each emissions model converge toward reasonably similar results. This would also help to increase confidence in the validity of photochemical grid model results by reducing one aspect of modeling uncertainty.     

Phthalate exposure in pregnant women and their children in central Taiwan

Phthalate exposure was found to be associated with endocrine disruption, respiratory effects, reproductive and developmental toxicity. The intensive use of plastics may be increasing the exposure to phthalates in Taiwanese population, particularly for young children.We studied phthalate metabolites in pregnant women and their newborns in a prospective cohort from a medical center in Central Taiwan. One hundred maternal urine samples and 30 paired cord blood and milk samples were randomly selected from all of participants (430 pregnant women). Eleven phthalate metabolites (MEHP, 5OH-MEHP, 2cx-MEHP, 5cx-MEPP, 5oxo-MEHP, MiBP, MnBP, MBzP, OH-MiNP, oxo-MiNP, and cx-MiNP) representing the exposure to five commonly used phthalates (DEHP, di-isobutyl phthalate (DiBP), DnBP, BBP, DiNP) were measured in urine of pregnant women, cord serum and breast milk after delivery, and in urine of their children. Exposure was estimated with excretion factors and correlation among metabolites of the same parent compound. Thirty and 59 urinary samples from 2 and 5 years-old children were randomly selected from 185 children successfully followed.Total urinary phthalate metabolite concentration (geometric mean, μg L⁻¹) was found to be higher in 2-years-olds (398.6) and 5-years-olds (333.7) than pregnant women (205.2). Metabolites in urine are mainly from DEHP. The proportion of DiNP metabolites was higher in children urine (4.39 and 8.31%, ages 2 and 5) than in adults (0.83%) (p < 0.01). Compared to urinary levels, phthalate metabolite levels are low in cord blood (37.45) and milk (14.90). DEHP metabolite levels in women’s urine and their corresponding cord blood are significantly correlated. Compared to other populations in the world, DEHP derived metabolites in maternal urine were higher, while phthalate metabolite levels in milk and cord blood were similar. The level of phthalate metabolites in milk and cord blood were comparable to those found in other populations. Further studies of health effects related to DEHP and DiNP exposure are necessary for the children.     

Study on Biodegradable Starch/OMMT Nanocomposites for Packaging Applications

The thermoplastic starch (TPS) and nanocomposite(TPS/OMMT) was prepared with 15% carbamide, 15% ethanolamine and different contents of organic activated montmorillonite (OMMT) by twin-screw extruder with a 130 °C barrel temperature. Fourier transforms infrared spectroscopy and wide angle X-ray diffraction shown that the alkylamine in dodecyl benzyl dimethyl ammonium bromide could react with MMT via cation exchange reaction. After treated, the d(001)space distance of MMT increased from 1.5 to 1.7 nm. Scanning electron microscope revealed that the lower contents of OMMT could disperse well in the matrixes of TPS. The carbamide, ethanolamine and the OMMT could destroy the crystallization behavior of starch, but only the OMMT restrained this behavior for long-term storing. Mechanical properties investigation indicated that the tensile strength and modulus of TPS/OMMT nanocomposites were better than those of TPS, while the elongation at break was descended with the increasing of OMMT contents. When the content of OMMT was 4%, the tensile strength and modulus of TPS was improved from 4.2 and 42 MPa to 6.0 and 76 MPa, respectively.     

Modification of Fe–Mn mixed oxide COS removal sorbent by rare-earth oxides addition

In order to develop highly active sorbent for COS removal, Fe–Mn mixed oxides doped with CeO₂, La₂O₃ or Sm₂O₃ were studied. The effects of these promoters on the structural properties of Fe–Mn oxides were investigated by XRD, BET, TPR and TEM techniques. XRD results revealed that the degree of crystallinity of Fe–Mn oxide phase decreased due to the addition of rare-earth oxides. Doping with CeO₂, La₂O₃ or Sm₂O₃ led to an increase in BET surface area of the sample. TPR studies showed that the reactivity of the reduction of doped samples increased in the temperature range of 300–450 °C. In addition, the desulfurization test was performed at 325 °C with a gas hourly space velocity of 1000 h⁻¹. It was found that the addition of 3% La₂O₃ greatly improved the absorption sulfur capacity of the sorbent, while the sorbent doped 3% CeO₂ achieved a sufficiently high purifying degree before breakthrough.     

高碱度水库水混凝过程中残留铝控制

针对高碱度水库水源的某水厂残留铝超标问题,选取碱化度(B)与Alb含量不同的3种铝盐絮凝剂,研究不同投量与pH值下混凝效果与残留铝浓度水平。结果表明,碱化度和Alb含量显著影响混凝效果。DOC和浊度的去除率随着3种絮凝剂AlCl3(B=0)、PACl-1(B=1.2)、PACl-2(B=2.2)投量增大而升高。3种絮凝剂投量在1.5～2.0 mg/L(以铝计)范围内,总铝和溶解铝含量最低。对于该水厂自制的絮凝剂PACl-2,可通过降低絮凝剂碱化度,或将水的pH值降低至7～7.5之间,以此可以提高PACl-2混凝效果,而且可以降低出厂水残留铝浓度。考虑工程应用可行性,可优先考虑调整絮凝剂生产工艺。     

耐低温贫营养好氧反硝化菌群脱氮特性及安全性

针对微污染水体强化原位生物脱氮技术同时面临低温、贫营养及好氧问题,对实验室已分离筛选的贫营养好氧反硝化菌和耐低温好氧反硝化菌进行菌源重组,构建出高效耐低温贫营养好氧脱氮功能菌群T1(Y3+F3+H8)和T2(Y3+F4)。研究不同投菌量条件下菌群的脱氮特性,结果表明,投菌量对T1脱氮效果有一定影响,0.1、0.2和1.0 mg/L投量对NO3--N去除率为71%、91%和100%,总氮去除率为56%、34%和52%;T2菌群,当投量为0.2 mg/L时,对NO3--N、总氮去除率最大可达66%和59.48%。对菌群T1、T2进行生物安全性分析,采用次氯酸钠进行消毒,其生物灭活率均达到99.9%以上。     

Effect of humic acids on physicochemical property and Cd(II) sorption of multiwalled carbon nanotubes

Zinc pyrithione is used as an antifouling agent. However, the environmental impacts of zinc pyrithione have recently been of concern. Zinc induces diverse actions during oxidative stress; therefore, we examined the effect of zinc pyrithione on rat thymocytes suffering from oxidative stress using appropriate fluorescent probes. The cytotoxicity of zinc pyrithione was not observed when the cells were incubated with 3 μM zinc pyrithione for 3 h. However, zinc pyrithione at nanomolar concentrations (10 nM or more) significantly increased the lethality of cells suffering from oxidative stress induced by 3 mM H₂O₂. The application of zinc pyrithione alone at nanomolar concentrations increased intracellular Zn²⁺ level and the cellular content of superoxide anions, and decreased the cellular content of nonprotein thiols. The simultaneous application of nanomolar zinc pyrithione and micromolar H₂O₂ synergistically increased the intracellular Zn²⁺ level. Therefore, zinc pyrithione at nanomolar concentrations may exert severe cytotoxic action on cells simultaneously exposed to chemicals that induce oxidative stress. If so, zinc pyrithione leaked from antifouling materials into surrounding environments would be a risk factor for aquatic ecosystems. Alternatively, zinc pyrithione under conditions of oxidative stress may become more potent antifouling ingredient.     

Catalytic destruction of pentachlorobenzene in simulated flue gas by a V2O5-WO3/TiO2 catalyst

Pentachlorobenzene (PeCB) in simulated flue gas was destructed by a commercial V₂O₅-WO₃/TiO₂ catalyst in this study. The effects of reaction temperature, oxygen concentration, space velocity and some co-existing pollutants on PeCB conversion were investigated. Furthermore, a possible mechanism for the oxidation of PeCB over the vanadium oxide on the catalysts was proposed. Results show that the increase of gas hourly space velocity (GHSV) and the decrease of operating temperature both resulted in the decrease of PeCB removal over the catalyst, while the effect of the oxygen content in the range of 5-20% (v/v) on PeCB conversion was negligible. PeCB decomposition could be obviously affected by the denitration reactions under the conditions because of the positive effect of NO but negative effect of NH₃. The introduction of SO₂ caused the catalyst poisoning, probably due to the sulfur-containing species formed and deposited on the catalyst surface. The PeCB molecules were first adsorbed on the catalyst surface, and then oxidized into the non-aromatic acyclic intermediates, low chlorinated aromatics and maleic anhydride.     

水稻与棉花秸秆不同预处理厌氧发酵产沼气

以猪粪为接种物,以棉花秸秆和水稻秸秆为发酵原料,分别对秸秆进行稀碱法预处理和稀碱法与超声波联合预处理,在发酵温度为(37±1)℃的条件下进行厌氧发酵产沼气的研究。结果表明,以联合预处理的秸秆为发酵原料,厌氧发酵的各项指标均比以稀碱预处理秸秆发酵的效果好,其中累积产气量和沼气中甲烷含量分别提高35.23%和2.4%,发酵后TS、VS含量相对减少2.6%～10.94%,发酵液代谢产物中的有机酸丙酮酸、乙酸和柠檬酸含量相对减少23.9%～25.9%、20.24%～24.53%和41.08%～45.91%。     

基于GCM_CB模型的土壤重金属污染评价

灰色聚类法已经运用于土壤重金属污染评价中,然而此法在确定聚类权重时仅考虑重金属浓度,忽略了衡量重金属毒性强弱的重要指标生物毒性指数。为了更客观和准确地反映土壤重金属的污染程度,将生物毒性指数引入到聚类指标权重中,构建GCM_CB(grey clustering method_concentration and biotoxicity)土壤重金属污染评价模型。通过对华东某地区的10个区域土壤重金属污染进行分析评价,并与常用评价方法对比研究,表明:其多数样点的评价结果基本一致,但针对样品4和样品9中的元素Hg,因其强毒性,使得评价等级由I级定为II级,从而提高了评价方法的灵敏度,更加符合该区域的实际土壤污染情况。