Photodegradation of amoxicillin by catalyzed Fe3+/H2O2 process

Three oxidation processes of UV-Fe³⁺(EDTA)/H₂O₂ (UV: ultraviolet light; EDTA: ethylenediaminetetraacetic acid), UV-Fe³⁺/H₂O₂ and Fe³⁺/H₂O₂ were simultaneously investigated for the degradation of amoxicillin at pH 7.0. The results indicated that, 100% amoxicillin degradation and 81.9% chemical oxygen demand (COD_Cr) removal could be achieved in the UV-Fe³⁺ (EDTA)/H₂O₂ process. The treatment efficiency of amoxicillin and COD_Cr removal were found to decrease to 59.0% and 43.0% in the UV-Fe³⁺/H₂O₂ process; 39.6% and 31.3% in the Fe³⁺/H₂O₂ process. Moreover, the results of biodegradability (biological oxygen demand (BOD₅)/COD_Cr ratio) revealed that the UV-Fe³⁺ (EDTA)/H₂O₂ process was a promising strategy to degrade amoxicillin as the biodegradability of the effluent was improved to 0.45, compared with the cases of UV-Fe³⁺/H₂O₂ (0.25) and Fe³⁺/H₂O₂ (0.10) processes. Therefore, it could be deduced that EDTA and UV light performed synergetic catalytic effect on the Fe³⁺/H₂O₂ process, enhancing the treatment efficiency. The degradation mechanisms were also investigated via UV-Vis spectra, and high performance liquid chromatography-mass spectra. The degradation pathway of amoxicillin was further proposed.     

中国典型城市PM2.5浓度时空演绎规律及影响因素分析

为探讨空气中ρ（PM_2.5）的空间集聚特征和气候、大气成分变量对空气中ρ（PM_2.5）的影响,利用首批纳入PM_2.5监测的74个城市的ρ（PM_2.5）数据计算Moran's I指数,并选取其中38个典型城市进行计量分析.在基于引力模型的空间权重矩阵基础上,构建面板数据SDM（空间面板杜宾模型）.结果表明:ρ（PM₁₀）、ρ（SO₂）、ρ（CO）、ρ（O₃）、RH（relative humidity,相对湿度）与城市ρ（PM_2.5）呈正相关,而T（temperature,温度）和WS（wind speed,风速）与城市ρ（PM_2.5）呈负相关;ρ（PM₁₀）、ρ（CO）、RH是位于前3位影响城市ρ（PM_2.5）的关键性因素,其总效应分别为0.720 1、0.241 7、0.133 9.地理上邻近城市ρ（PM_2.5）具有明显的外部空间溢出效应,即邻近城市ρ（PM_2.5）每增加10百分点,将导致该地区ρ（PM_2.5）增长6.12百分点.300 km左右是保证PM_2.5区域"联防联控"最佳效果的最大门槛距离,超过该门槛距离,区域"联防联控"的力度和效果会随着距离的增加而逐渐减弱;当门槛距离大于500 km时,ρ（PM_2.5）的空间自相关性不显著.气候变量中,RH和ρ（PM_2.5）呈同方向变化,而T、WS与ρ（PM_2.5）呈反方向变化.研究显示,关注单一地区或单一因素（气候或大气成分）均不能有效控制PM_2.5污染,在保持经济稳定增长的前提下,各地治理PM_2.5应从调整产业结构、优化能源结构、完善防控机制等多个维度共同推进,促使经济增长方式早日从"粗放型"向"集约型"转变.      

冷空气在北上台风“利奇马”致灾暴雨中的作用分析

利用NCEP逐6 h再分析资料、地面加密观测、探空、雷达资料,分析得出“利奇马”致灾暴雨是在长时间稳定维持的天气尺度环流背景下形成的。冷空气在降水所起的作用表现在:(1)长时间维持的弱冷空气与偏南暖湿气流交汇形成了边界层辐合线,辐射升温和暖湿气流的输送加大了辐合线两侧的温度和露点梯度,在高温高湿的有利环境下,对流在辐合线附近强烈发展。(2)高空槽后冷空气由“利奇马”环流西北侧渗入,先后形成3个冷平流中心,分别对应3个阶段的降水。(3)冷暖空气在降水区的持续辐合抬升作用增强了降水,最强降水时段发生在锋区垂直方向坡度最大的时段。(4)水平锋生有利于水汽输送和辐合抬升,垂直锋生有利于对流不稳定能量的累积和触发。冷空气形成的水平辐合和抬升造成大范围上升运动,使得锋生和垂直锋消同时存在,最强降水时段发生在水平锋生最强的时段。     

Socio-demographic determinants of municipal waste generation: case study of the Czech Republic

Journal of Material Cycles and Waste Management - Increasing pressure of the European Union on diverting municipal waste from landfills requires an active role of households and commands a radical...     

Deep learning of grasping detection for a robot used in sorting construction and demolition waste

Journal of Material Cycles and Waste Management - The traditional construction and demolition waste (CDW) treatment process adopts the method of crushing and screening after mixing and combines the...     

吸附铅、镉固定化细菌胞壁多糖小球包埋条件的优化选择

细菌已广泛应用于重金属废水的处理,多糖则是细胞壁的主要成分,并通过螯合作用吸附重金属,而固定化技术具有处理效率高,生产成本低等优势。采用正交实验法,以聚乙烯醇和海藻酸钠为包埋剂,同时添加活性炭,硅藻土等对细菌胞壁多糖进行固定化,并以吸附铅、镉能力为主要考察指标,同时从机械强度、传质性、耐酸性等方面综合考虑,选择最优化的固定化小球最佳配方。结果表明,在聚乙烯醇、海藻酸钠、活性炭、硅藻土、多糖、二氧化硅和饱和硼酸中氯化钙的质量分数分别为10%、0.2%、1.5%、1.5%、0.8%、4%、3%,胶联时间为16h,己二胺浓度为0.06mol?L-1的条件下制得的固定化小球对铅、镉吸附的能力较强,并按照最佳配方进行了验证实验,对铅的吸附量达到4.4575μmol?g-1,对镉的吸附量达到4.1708μmol?g-1,机械强度、传质性和耐酸性都较好。     

Decomposition of 2-mercaptothiazoline in aqueous solution by ozonation

This study investigates the ozonation of 2-mercaptothiazoline (2-MT). The 2-MT is one of the important organic additives for the electroplating solution of the printed wiring board industry and has been widely used as a corrosion inhibitor in many industrial processes. It is of concern for the aquatic pollution control especially in the wastewaters. Semibatch ozonation experiments in the completely stirred tank reactor are performed under various concentrations of input ozone. The concentrations of 2-MT, sulfate, and ammonium are analyzed at specified time intervals to elucidate the decomposition of 2-MT during the ozonation. In addition, the time variation of the dissolved ozone concentration (C(ALb)) is continuously monitored in the course of experiments. Total organic carbon (TOC) is chosen and measured as a mineralization index of the ozonation of 2-MT. The results indicate that the decomposition of 2-MT is efficient, while the mineralization of TOC is limited via the ozonation only. Simultaneously, the yield of sulfate with the maximum value of about 47% is characterized by the increases of TOC removal and ozone consumption. These results can provide some useful information for assessing the feasibility of the treatment of 2-MT in the aqueous solution by the ozonation.     

啤酒生产废水处理设计及运行研究

分析了年产15万t啤酒的生产废水情况,介绍了采用IC厌氧反应器-一体化氧化沟处理该生产废水(7 200 m3/d)的工艺路线和主要设计参数,讨论了废水处理系统的运行情况.其中IC厌氧反应器的HRT为8 h,运行温度为35～37 ℃;一体化氧化沟包括氧化沟段和沉淀池段,总尺寸为40 m×24 m×6 m.IC厌氧反应器COD容积负荷在7.78 kg/(m3·d)时,COD去除率为84%左右.整套废水处理系统的COD总去除率为98%左右,出水COD小于80 mg/L.厌氧所产生的沼气可用于废水的升温.     

黄河兰州段沉积物对水体中萘的吸附行为及影响

为研究典型有机污染物在黄河兰州段沉积物的吸附规律及影响,以黄河兰州段的沉积物为供试样品,选择萘（naphthalene）为代表性有机污染物,采用批量试验法研究了污染物萘在黄河沉积物上的吸附动力学、吸附热力学、初始质量浓度、pH、离子强度、粒径等影响因素以及解吸动力学.结果表明:黄河沉积物对萘的吸附动力学更符合准二级动力学模型,且吸附过程主要分为快吸附（0~4 h）和慢吸附（4~8 h）两个阶段,在8 h左右达到平衡;Freundlich模型能较好地拟合热力学吸附特征.在25~45℃的温度范围内,E（吸附平均自由能）为0.288~0.316 kJ/mol（< 8 kJ/mol）,吸附过程中,ΔGθ（吉布斯自由能）小于0,ΔSθ（熵变）与ΔHθ（焓变）均大于0,说明萘在黄河沉积物上的吸附是一个自发的混乱度增大的吸热过程,且以物理吸附为主.影响因素分析结果显示,随着沉积物粒径的增大,萘在其上的吸附量逐渐减小;增大吸附体系中的离子强度时,萘在沉积物上的吸附过程受到抑制;当萘初始浓度增大时,吸附量增加;酸性条件抑制吸附过程,碱性环境促进吸附过程;黄河沉积物对萘的解吸量远小于吸附量,存在解吸滞后现象.研究显示,萘在黄河沉积物中的吸附速率受内部扩散、表面吸附和液膜扩散的共同影响,并且吸附过程同时受到沉积物粒径和溶液的pH和离子强度的影响.      

异质结型SnO2-TiO2纳米纤维光催化降解柴油机多环芳烃

采用同轴静电纺丝法制备了SnO_2-TiO_2纳米纤维,用X射线衍射仪(XRD)、扫描电子显微镜(SEM)、红外光谱仪(FTIR)和紫外-可见光谱能谱仪(UV-Vis),表征了SnO_2-TiO_2纳米纤维相组成和微观形貌,评价了催化剂表面化学形态和吸光特性,研究了SnO_2含量、光源条件、温度和催化稳定性对降解萘污染物的影响规律.结果表明,催化剂Sn25对萘降解效率最高.在暗光、可见光和紫外光条件下,萘降解效率分别为13.8%、37%和98%.Sn25对萘降解稳定率(标准差率)为0.36%.利用催化剂Sn25对柴油机尾气中多环芳烃(PAHs)排放污染物光催化降解应用发现,Sn25对低苯环PAHs、中苯环PAHs和高苯环PAHs的平均催化降解效率分别为80.2%、75.4%和60.2%.表明SnO_2-TiO_2纳米纤维具有较强光催化降解多环芳烃污染物能力.