石化企业危险化学品重大危险源风险评估

阐述了定量风险评价的个人风险和社会风险指标,并从前期准备、资料数据搜集、危险辨识、失效频率分析、失效后果分析、风险计算和风险评估等环节对某石化企业液化气一级重大危险源进行了定量风险评估。评估结果显示该重大危险源的个人风险和社会风险值基本符合安监总局40号令的要求。     

沸石改良土壤的研究进展

沸石因其独特的晶体结构具有较强的离子交换能力和吸附能力,作为良好的土壤改良剂逐步引起了人们的广泛重视。简要综述了沸石对土壤的理化性质、重金属、植物、微生物和酶的影响及其研究进展。     

pH和DO对好氧颗粒污泥去除高氨氮废水的影响研究

研究使用SBR成功培养的结构紧密、外形规则,具有良好脱氮性能的成熟好氧颗粒污泥处理高浓度氨氮废水,并探讨pH和DO对其处理效果的影响,旨在为工程实践提供理论依据。通过人工模拟废水,以蔗糖作为唯一碳源,NH4Cl为氮源,将进水NH4+-N浓度由300 mg/L逐步提高至900 mg/L,相应的NH4+-N负荷由0.6 kg/(m3.d)提高至1.8 kg/(m3.d),考察pH和DO对其处理效果的影响。研究结果表明:当控制反应器pH为8.0,曝气量为75 L/h时,好氧颗粒污泥脱氮的效果最好,氨氮去处率分别为96.70%9、2.33%。由于运行过程中每隔15 min监测每个反应器pH值,使其维持在各自pH值7.0±0.1范围内。这种酸碱度环境对异养菌等微生物并没有产生抑制作用;因此在各pH条件下,COD去除的所需时间和去除率基本没有差别。在不同的DO下,COD在初始的60 min里降解速度有明显区别。曝气量为150 L/h时,COD的降解速度最快,但是曝气量过大颗粒污泥内部厌氧区被压缩,因此选择最佳的曝气量为75 L/h。     

巢湖流域水资源可持续性评价方法研究

水资源可持续性评价模型(WRSEM,Water Resource Sustainability Evaluation Model)能够定量地评价流域水资源的可持续性,是流域水资源管理的一个有效工具。本文为了科学地衡量巢湖流域水资源开发、利用和管理的可持续性,构建了巢湖流域水资源可持续性评价模型和评价指标体系。巢湖流域水资源可持续性评价指标体系由4个一级指标(经济效率、社会公平、环境保护和保障能力)和20个二级指标构成。最后根据相对权重综合计算得到流域水资源可持续性指数。评价结果表明了巢湖流域水资源可持续性的程度,同时研究结果为巢湖流域水资源管理及其相关政策制定提供了科学依据。     

黄土高原近30年植被变化特征及其气候驱动

The use of Normalized difference vegetation index (NDVI) data acquired with multiple satellite sensors has become a necessity in research fields such as agriculture, Land-Use and Land-Cover Change (LUCC) and changes in the natural environment. In this paper, vegetation 10-day composite (VGT-S10) NDVI data with a 1 km×1 km resolution, covering the period from April 1982 to December 2011 and Advanced Very High Resolution Radiometer (AVHRR) Global Inventory Modelling and Mapping Studies (GIMMS) NDVI data with a 8 km×8 km resolution, covering the period from April 1998 to December 2006 were used. The VGT NDVI covering the period from 2007 to 2011 was converted to the GIMMS NDVI for the same period. The vegetation trend during 1982 to 2011 was calculated using the extended NDVI data set. Climate change has a large impact on the vegetation dynamics. A series of statistical analyses were employed to demonstrate the relationship between NDVI and meteorological data during 1982 to 2005. A multiple correlation analysis was applied to validate the association between the two climatic factors and monthly maximum NDVI (MNDVI). The partial correlation coefficient of MNDVI and each climate factor were calculated respectively to describe the singular influence of each meteorological variable. The results indicated that temperature made a significant positive influence on vegetation growth in the whole Loess Plateau. Precipitation is the most important climatic factor that closely correlates with MNDVI, particularly in arid and semi-arid environments. However, in some wet regions, precipitation is not a limiting factor on vegetation growth.     

基于ImageJ评价泥炭岩心存储对色相与彩度的影响

利用ImageJ软件对2008年在红原泥炭地开展钻探时的泥炭岩心照片和2009年分样时的岩心照片进行表面色彩分析.对比分析发现,存储以前和存储以后泥炭岩心的表面色彩发生改变,表现在样品存储后基于RGB色彩体系的三元色值和灰度值均有降低(变暗),且各色值变化幅度降低.就各色值在剖面上的变化特征而言,样品存储前和存储后的变...     

漓江沉积柱重金属垂向分布特征及污染评价

对桂林漓江3个采样点沉积柱状沉积物中主要重金属元素(Cd、Cr、Cu、Zn、Pb、As和Ni)的垂向分布进行了测定。结果表明:7种重金属元素具有相似的垂向变化特征;横向上表现为靠近市区的含量高远离,市区的含量低。地积累指数评价结果显示,远离市区的沉积柱7种金属污染程度较轻,仅有Cd和Ni属于无～中污染程度。临近市区的沉积柱形成污染的元素为Cd、Cu、Zn、Pb和As,主要集中在底层和次表层。     

适应气候变化是当务之急

地球气候变化既有自然因素又有人为因素,全球变暖主要原因是人类活动温室气体排放过度。因此,在应对气候变化问题上,人们对减排温室气高度重视是理所当然,而长期以来对＂适应气候变化＂却有所忽视。其实,对发展中国家《适应气候变化》才是当务之急。本文在＂发展低碳经济,应对全球变暖＂减排二氧化碳温室气体的基础上,论述适应气候变化的迫切性和基本途径。     

煤矿建设项目环境影响评价有关问题的探讨

本文根据煤矿建设项目的特点,分析了煤矿开采对建设期、运营期的主要环境影响,并在此基础上提出了煤矿建设项目环境影响评价应关注的环境问题。     

Smooth surface fabrication in mask projection based stereolithography

The surface finish is critical for applications such as optics, micro-fluid flow and mechanical assembly, in which optical lenses, fluidic channels and rotating components are all required to be smooth. However, the stair-stepping effect is well known in the layer-based additive manufacturing processes, in which a three-dimensional model is approximated by a set of two-dimensional layers. Consequently the fabricated surfaces have poor surface finishes especially those that are close to the horizontal plane. In this paper, a novel approach for achieving improved surface finish is presented for the mask-image-projection-based stereolithography (MIP-SL) process. Theoretical models and parameter characterization are presented for the developed methods. Accordingly, the process planning and calibration approaches for fabricating smooth up-facing surfaces in the MIP-SL process have been developed. Multiple test cases based on various types of curved surfaces have been performed. A comparison of the build results based on the traditional and the newly developed approaches illustrates the effectiveness of our method.