基于Innography平台的生物修复技术专利分析

为全面了解全球生物修复技术的研发状况与趋势,以Innography专利分析平台为基础,分析全球专利数量、申请人分布、申请人所属国的竞争态势及国际专利分类法(IPC)分类,探讨核心专利的来源和研发主题等,并对我国生物修复技术专利数量和发展趋势进行分析。结果表明:从全球来看,2002年后生物修复技术专利数量迅速上升,其中中国的专利数量最多,但核心专利中80.0%来自美国,核心专利的热点主题为有机污染物、能耗、水处理等;来自中国的专利中,马鞍山新洲葡萄酒公司、中国科学院、南京大学、哈尔滨工业大学和西安建筑科技大学拥有专利数量较多,其中马鞍山新洲葡萄酒公司和中国科学院同时拥有较强的综合实力和技术创新能力;中国生物修复专利技术的热点主题为医疗、废水、生物可用性、重金属和地下水等。未来生物修复的研究将更多集中在土壤重金属污染、水环境综合治理以及有机污染物治理等方面。     

异质结型SnO2-TiO2纳米纤维光催化降解柴油机多环芳烃

采用同轴静电纺丝法制备了SnO_2-TiO_2纳米纤维,用X射线衍射仪(XRD)、扫描电子显微镜(SEM)、红外光谱仪(FTIR)和紫外-可见光谱能谱仪(UV-Vis),表征了SnO_2-TiO_2纳米纤维相组成和微观形貌,评价了催化剂表面化学形态和吸光特性,研究了SnO_2含量、光源条件、温度和催化稳定性对降解萘污染物的影响规律.结果表明,催化剂Sn25对萘降解效率最高.在暗光、可见光和紫外光条件下,萘降解效率分别为13.8%、37%和98%.Sn25对萘降解稳定率(标准差率)为0.36%.利用催化剂Sn25对柴油机尾气中多环芳烃(PAHs)排放污染物光催化降解应用发现,Sn25对低苯环PAHs、中苯环PAHs和高苯环PAHs的平均催化降解效率分别为80.2%、75.4%和60.2%.表明SnO_2-TiO_2纳米纤维具有较强光催化降解多环芳烃污染物能力.     

Behaviors and kinetics of toluene adsorption‐desorption on activated carbons with varying pore structure

This work was undertaken to investigate the behaviors and kinetics of toluene adsorption and desorption on activated carbons with varying pore structure. Five kinds of activated carbon from different raw materials were selected. Adsorption isotherms and breakthrough curves for toluene were measured. Langmuir and Freundlich equations were fitted to the equilibrium data, and the Freundlich equation was more suitable for simulating toluene adsorption. The process consisted of monolayer, multilayer and partial active site adsorption types. The effect of the pore structure of the activated carbons on toluene adsorption capacity was investigated. The quasi-first-order model was more suitable for describing the process than the quasi-second-order model. The adsorption data was also modeled by the internal particle diffusion model and it was found that the adsorption process could be divided into three stages. In the external surface adsorption process, the rate depended on the specific surface area. During the particle diffusion stage, pore structure and volume were the main factors affecting adsorption rate. In the final equilibrium stage, the rate was determined by the ratio of meso-and macro-pores to total pore volume. The rate over the whole adsorption process was dominated by the toluene concentration. The desorption behavior of toluene on activated carbons was investigated,and the process was divided into heat and mass transfer parts corresponding to emission and diffusion mechanisms, respectively. Physical adsorption played the main role during the adsorption process.     

Are current Chinese national ambient air quality standards on 24-hour averages for particulate matter sufficient to protect public health?

With rapid economic development and urbanization in recent decades, China has experienced the worsening of ambient air quality. For better air quality management to protect human health, Chinese government revised national ambient air quality standards(NAAQS) for particulate matter(PM) in 2012(GB3095-2012). To assess the effectiveness of current NAAQS for PM on public health in Chinese population, we conducted a metaanalysis on published studies examining the mortality risk of short-term exposure to PM with aerodynamic diameters less than 10 and 2.5 μm(PM_(10) and PM_(2.5)) in China. The reported24-hour concentrations of PM_(10) and PM_(2.5) in studies ranged from 43.5 to 150.1 μg/m~3 and 37.5 to 176.7 μg/m~3. In the pooled excess, mortality risk estimates of short-term exposure to PM.In specific, per 10 μg/m~3 increase in PM_(10), we observed increases of 0.40%(95%CI: 0.33%,0.47%), 0.57%(95%CI: 0.44%, 0.70%) and 0.49%(95%CI: 0.40%, 0.58%) in total, respiratory and cardiovascular mortality, per 10 μg/m~3 increase in PM_(2.5), we observed increases of 0.51%(95%CI: 0.38%, 0.63%), 0.62%(95%CI: 0.52%, 0.73%) and 0.75%(95%CI: 0.54%, 0.95%) in total,respiratory and cardiovascular mortality. Finally, we derived 125 μg/m~3 for PM_(10) and 62.5 μg/m~3 for PM_(2.5) as 24-hour recommendation values based on the pooled estimates. Our results indicated that current Chinese NAAQS for PM could be sufficient in mitigating the excess mortality risk from short-term exposure to ambient PM. However, future research on longterm exposure cohort studies in Chinese population is also essential in revising annual averages for PM in Chinese NAAQS.     

Insights into the formation of secondary organic carbon in the summertime in urban Shanghai

To investigate formation mechanisms of secondary organic carbon(SOC) in Eastern China,measurements were conducted in an urban site in Shanghai in the summer of 2015. A period of high O_3 concentrations(daily peak 120 ppb) was observed, during which daily maximum SOC concentrations exceeding 9.0 μg/(C·m~3). Diurnal variations of SOC concentration and SOC/organic carbon(OC) ratio exhibited both daytime and nighttime peaks. The SOC concentrations correlated well with O_x(= O_3+ NO_2) and relative humidity in the daytime and nighttime, respectively, suggesting that secondary organic aerosol formation in Shanghai is driven by both photochemical production and aqueous phase reactions. Single particle mass spectrometry was used to examine the formation pathways of SOC. Along with the daytime increase of SOC, the number fraction of elemental carbon(EC) particles coated with OC quickly increased from 38.1% to 61.9% in the size range of 250–2000 nm, which was likely due to gas-to-particle partitioning of photochemically generated semi-volatile organic compounds onto EC particles. In the nighttime, particles rich in OC components were highly hygroscopic, and number fraction of these particles correlated well with relative humidity and SOC/OC nocturnal peaks. Meanwhile, as an aqueous-phase SOC tracer, particles that contained oxalate-Fe(III) complex also peaked at night. These observations suggested that aqueous-phase processes had an important contribution to the SOC nighttime formation. The influence of aerosol acidity on SOC formation was studied by both bulk and single particle level measurements, suggesting that the aqueous-phase formation of SOC was enhanced by particle acidity.     

原油加热炉炉管剩余寿命评估

根据加热炉炉管温度分布,提出了加热炉炉管剩余寿命评估方法:即炉管蠕变损伤后剩余寿命的评估和腐蚀损伤后剩余寿命的评估,采用此方法对在用加热炉进行了评估,并对评价结果进行了验证.     

北京森林土壤富里酸亚组分的表征及荧光指标分析

为探究土壤FA（富里酸）的结构组成及其腐殖化和芳香性特征,采用SFS（同步荧光光谱）技术结合FRI（荧光区域积分）、DSFS（导数荧光光谱）及PCA（主成分分析）对土壤FA亚组分的荧光光谱特征及荧光指标间的相关性进行了分析.利用XAD-8吸附树脂结合初始pH为3、5、7、9和13的Na₄P₂O₇（焦磷酸钠）缓冲溶液逐步洗脱技术将土壤FA分别分级得5种亚组分（FA₃、FA₅、FA₇、FA₉和FA₁₃）.结果表明:①FA₃-FA₁₃的SFS体现3类荧光峰,分别代表类蛋白、类富里酸和类腐殖酸物质.FA₃和FA₅含有含量相近的类蛋白、类富里酸和类腐殖酸物质,而FA₇-FA₁₃含有的主要成分是类蛋白物质;同时,FA₇-FA₁₃的类富里酸和类腐殖酸较FA₃和FA₅更为复杂,且FA₇-FA₁₃含有更多易降解的单环芳香族化合物.②FA₃和FA₅的类酪氨酸和类色氨酸物质被识别,且FA₇-FA₁₃的类色氨酸含量明显大于类富里酸和类腐殖酸含量.③FA₃-FA₁₃光谱荧光强度指标（I₂₄₀/I₃₄₀、I₂₄₀/I₄₅₀、I₃₄₀/I₂₇₀、I₄₅₀/I₂₇₀和I₄₅₀/I₃₄₀）的对比分析表明,FA₃和FA₅的腐殖化程度和芳香性均大于FA₇-FA₁₃.④荧光指标A_FLR/A、A_HLR/A、S_270-340、S_270-450、A₂/A₁和A₃/A₁可作为指示亚组分芳香性的优化指标,且A_HLR/A、A₂/A₁和A₃/A₁可作为最佳指标反映亚组分的腐殖化程度.研究显示,土壤FA亚组分的结构表征及荧光指标分析为后续FA亚组分与环境污染物相互机理研究提供依据,为探究有机质的结构特性和环境行为提供理论支撑.      

黄河兰州段沉积物对水体中萘的吸附行为及影响

为研究典型有机污染物在黄河兰州段沉积物的吸附规律及影响,以黄河兰州段的沉积物为供试样品,选择萘（naphthalene）为代表性有机污染物,采用批量试验法研究了污染物萘在黄河沉积物上的吸附动力学、吸附热力学、初始质量浓度、pH、离子强度、粒径等影响因素以及解吸动力学.结果表明:黄河沉积物对萘的吸附动力学更符合准二级动力学模型,且吸附过程主要分为快吸附（0~4 h）和慢吸附（4~8 h）两个阶段,在8 h左右达到平衡;Freundlich模型能较好地拟合热力学吸附特征.在25~45℃的温度范围内,E（吸附平均自由能）为0.288~0.316 kJ/mol（< 8 kJ/mol）,吸附过程中,ΔGθ（吉布斯自由能）小于0,ΔSθ（熵变）与ΔHθ（焓变）均大于0,说明萘在黄河沉积物上的吸附是一个自发的混乱度增大的吸热过程,且以物理吸附为主.影响因素分析结果显示,随着沉积物粒径的增大,萘在其上的吸附量逐渐减小;增大吸附体系中的离子强度时,萘在沉积物上的吸附过程受到抑制;当萘初始浓度增大时,吸附量增加;酸性条件抑制吸附过程,碱性环境促进吸附过程;黄河沉积物对萘的解吸量远小于吸附量,存在解吸滞后现象.研究显示,萘在黄河沉积物中的吸附速率受内部扩散、表面吸附和液膜扩散的共同影响,并且吸附过程同时受到沉积物粒径和溶液的pH和离子强度的影响.      

水处理用活性炭改性研究

利用锆和氯化十六烷基三甲铵共同改性活性炭,制备一种新型去除污水中硝酸盐和磷酸盐的水处理吸附剂,并考察吸附剂加量、反应温度、pH值、共存阴离子等影响因素对吸附效果的影响。结果表明:锆-氯化十六烷基三甲铵改性活性炭(Zr-CTAC-AC)吸附剂适用于硝酸盐和磷酸盐浓度在100mg/L以下的污水,随着Zr-CTAC-AC加量的增加,硝酸盐、磷酸盐去除率逐渐增加,单位吸附量逐渐下降,Zr-CTAC-AC加量为8g/L时,硝酸盐去除率为79%,Zr-CTAC-AC加量为4.0g/L时,磷酸盐去除率可达91%,但应在较低的pH值范围内使用;反应温度对Zr-CTAC-AC的吸附效果影响不大;共存Cl-、HCO3^-和SO4^2-可使硝酸盐的吸附率降低,但对磷酸盐吸附率影响较小;1mol/L NaCl溶液可使吸附到Zr-CTAC-AC表面的硝酸盐90.9%左右被解吸出来,1mol/L NaOH溶液可使吸附到Zr-CTAC-AC表面的磷酸盐78.4%左右被解吸出来。Zr-CTAC-AC能够有效去除污水中硝酸盐和磷酸盐,制备方法简单,且可循环利用,处理成本低。