Lack of innate preference for morph and species identity in mate-searching <Emphasis Type="Italic">Enallagma</Emphasis> damselflies

Insect mate recognition is often viewed as stereotypic, innate, and species-specific. However, male damselflies can learn to identify female-specific color morphs as potential mates. A suite of male mimicry hypotheses assume that heteromorphic females, which differ from males in color pattern, are more easily recognized as “female” and thus lack the inherent, anti-harassment advantage that the more male-like signal provides for andromorphs. Using two measures of male preference, we investigated whether naïve males have a preexisting sensory bias for a given morph color in Enallagma civile, a species that appeared to exhibit extreme plasticity in morph expression across generations within a breeding season. E. civile males raised in the absence of females exhibited no preference for either morph, whereas males raised with one female type exhibited a learned sensory bias for that morph. Male Enallagma also lacked a bias toward conspecific females over a congeneric sister species. In a naturally naïve population of Enallagma ebrium, males reacted sexually to both morphs of Enallagma hageni as often as they did to conspecific females, whose thoracic spectra were nearly identical with those of E. hageni. Moreover, despite the similar thoracic spectra of males and andromorphs, both of which reflected UV, males rarely reacted sexually to other males. Our results falsified implicit assumptions of male mimicry hypotheses, supported learned mate recognition, and suggested a scenario for speciation via sexual conflict.     

Restoration Scaling Approaches to Addressing Ecological Injury: The Habitat-Based Resource Equivalency Method

Environmental Management - Natural resource trustee agencies must determine how much, and what type of environmental restoration will compensate for injuries to natural resources that result from...     

Resistance in bacteria and indirect beta-lactamase detection in E. coli isolated from Culex pipiens detected by matrix-assisted laser desorption ionization time of flight mass spectrometry

The aim of this study was detections of antibiotic resistance and resistance mechanism in bacteria isolated from mosquitos (Culex pipiens) living near humans. Therefore, antibiotic resistance in bacteria isolated from Culex pipiens was investigated by disk diffusion test and MIC E-test in this study. MALDI-TOF mass spectrometry was used for detection of resistant mechanism. In this study, hydrolytic breakdown products after a few hours of incubation of the bacteria isolated from Culex pipiens were detected. Results show that enzymatic destruction of ampicillin by beta-lactamases is able to be detected by MALDI-TOF mass spectrometry from wild strains of potential pathogens. The MALDI-TOF mass spectrometry is useful method for routine detection of beta-lactamases resistant mechanism, but overnight incubation of pure culture is necessary. The results are important for proper and fast intervention to limit the spread of beta-lactamase-producing wild bacteria and provide information for appropriate initial therapy of the infections caused by these microbes.     

Generality of relationships between leaf pigment contents and spectral vegetation indices in Mallorca (Spain)

Vegetation indices are calculated from reflectance data of discrete spectral bands. The reflectance signal in the visible spectral range is dominated by the optical properties of photosynthetic pigments in plant leaves. Numerous spectral indices have been proposed for the estimation of leaf pigment contents, but the efficacy of different indices for prediction of pigment content and composition for species-rich communities is unknown. Assessing the ability of different vegetation indices to predict leaf pigment content we identify the most suitable spectral indices from an experimental dataset consisting of field-grown high light exposed leaves of 33 angiosperm species collected in two sites in Mallorca (Spain) with contrasting leaf anatomy and pigment composition. Leaf-level reflectance spectra were recorded over the wavelength range of 400 – 900 nm and contents of chlorophyll a, chlorophyll b, total carotenoids, and anthocyanins were measured in 33 species from different plant functional types, covering a wide range of leaf structures and pigment content, five-fold to more than 10-fold for different traits. The best spectral region for estimation of leaf total chlorophyll content with least interference from carotenoids and anthocyanins was the beginning of near-infrared plateau well beyond 700 nm. Leaves of parallel-veined monocots and pinnate-veined dicots had different relationships between vegetation indices and pigments. We suggest that the nature and role of “far-red” chlorophylls which absorb light at longer wavelengths than 700 nm constitute a promising target for future remote sensing studies.

     

Learning for sustainability through CIDA's “Community-based pest management in Central American agriculture” project: a deliberative,experiential and iterative process

Community-based approaches to environmental management provide opportunities for public engagement in local decision-making processes. This qualitative case study examines learning as resulted from participation in CIDA's “Community-based pest management in Central American agriculture” project. Outcomes include learning about alternative farming practices, human and natural environments, and safer pesticide use. Many participants learnt how to work more effectively with rural communities. For some, this changed their perspective about life and their role in society. Activities that fostered learning outcomes, including sustainability-related outcomes, were: planning and implementing project activities, experimenting on farm demonstration plots, participating in outreach workshops, and students doing rural practica. The learning process, involving international university collaborators and rural participants, is analyzed particularly as it relates to cultural context, collective action, and sustainability. Findings affirm that how the public participates in environmental management decisions influences the breadth and depth of learning outcomes; practical and policy implications are discussed.     

Biocomplementation of SVE to achieve clean-up goals in soils contaminated with toluene and xylene

Soil vapor extraction (SVE) and bioremediation (BR) are two of the most common soil remediation technologies. Their application is widespread; however, both present limitations, namely related to the efficiencies of SVE on organic soils and to the remediation times of some BR processes. This work aimed to study the combination of these two technologies in order to verify the achievement of the legal clean-up goals in soil remediation projects involving seven different simulated soils separately contaminated with toluene and xylene. The remediations consisted of the application of SVE followed by biostimulation. The results show that the combination of these two technologies is effective and manages to achieve the clean-up goals imposed by the Spanish Legislation. Under the experimental conditions used in this work, SVE is sufficient for the remediation of soils, contaminated separately with toluene and xylene, with organic matter contents (OMC) below 4 %. In soils with higher OMC, the use of BR, as a complementary technology, and when the concentration of contaminant in the gas phase of the soil reaches values near 1 mg/L, allows the achievement of the clean-up goals. The OMC was a key parameter because it hindered SVE due to adsorption phenomena but enhanced the BR process because it acted as a microorganism and nutrient source.     

Assessment of sorbent impregnated PUF disks (SIPs) for long-term sampling of legacy POPs

Two field studies were conducted for one year using sorbent-impregnated polyurethane foam (SIP) disks for PCB and PBDE air sampling. SIP disks were introduced by Shoeib et al. (2008) as an alternative passive air sampling medium to the polyurethane foam (PUF) disk and have the advantage of a higher holding capacity for organic chemicals. The first study on SIP disks confirmed their application for measuring volatile perfluorinated compounds (PFCs) and their ability to maintain time-integrated (linear) air sampling. In this study, the suitability of the SIP disks for long-term sampling of polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs) and hexachlorobenzene (HCB) was assessed. SIP disks were deployed at a rural site in the UK and harvested after periods ranging from 35-350 days. Atmospheric POP concentrations were monitored with a high-volume air sampler during the deployment period. Linear uptake was observed for all monitored PCBs and PBDEs over the full exposure time. Air-sampler equilibrium was observed for HCB after 6 months. In a second field study, SIP disks were deployed for one year at 10 sites on a latitudinal transect in the UK and Norway, at which air sampling has been undertaken previously with different passive air sampling media since 1994. The estimated concentrations and spatial distributions derived from the SIP disks were largely in agreement with previously reported data.     

The hydrogeology of a tailings impoundment formed by central discharge of thickened tailings: implications for tailings management

The Kidd Creek Cu–Zn sulfide mine is located near Timmins, Ontario. Mill tailings are thickened and deposited as a slurry in a circular impoundment with an area of approximately 1200 ha. Deposition of tailings as a thickened slurry from a central discharge ramp results in a conical-shaped tailings deposit with low perimeter dykes, a uniform grain-size distribution, uniform and low hydraulic conductivity, and a tension-saturated zone above the water table up to 5 to 6 m thick. These characteristics provide benefits over conventionally disposed tailings with respect to tailings management. The thick tension-saturated zone within the tailings limits the thickness of unsaturated tailings that are susceptible to rapid sulfide oxidation. The conical shape of the deposit results in the formation of a recharge area near the centre of the impoundment and discharge in the peripheral areas. In contrast, the elevated nature of many conventional, unthickened tailings impoundments results in recharge over most of the surface of the impoundment, with discharge occurring outside the impoundment through large containment dykes. Three-dimensional pore water flow modelling suggests that approximately 90% of the total discharge from the thickened tailings occurs within the tailings impoundment. When discharge is confined within the impoundment, there is improved control over low-quality effluent, and an opportunity to design passive control measures to reduce treatment costs and minimize environmental impacts.     

Elimination of persistent organic pollutants from fish oil with solid adsorbents

Fish oils are one of the main sources of ω-3 fatty acids in animal and human diet. However, they can contain high concentrations of persistent organic pollutants due to their lipophilic properties. The aim of this study is the reduction of persistent organic pollutants in fish oil using silicon-based and carbon-based solid adsorbents. A wide screening study with different commercially available adsorbents was carried out, in order to determine their capacity of pollutant removal from fish oil. Moreover, adsorption conditions were evaluated and optimized with using an experimental design and adjustment of the experimental results to response surfaces, obtaining removals rates of more than 99% of PCDD/Fs, 81% of dioxin-like PCBs, 70% of HCB, 41% of DDTs, 16% of marker PCBs and 10% of PBDEs. Finally, fish oil fatty acids were analyzed before and after the treatment with solid adsorbents, confirming that it did not affect its nutritive properties.     

Australian agriculture: coping with dangerous climate change

Australian agriculture has operated successfully in one of the world’s most hostile environments for two centuries. However, climate change is posing serious challenges to its ongoing success. Determining what might constitute dangerous climate change for Australian agriculture is not an easy task, as most climate-related risks are associated with changes in the highly uncertain hydrological cycle rather than directly to more predictable changes in temperature. In addition, the adaptive capacity of Australian producers is generally high, as they have had to cope with a highly variable climate in which periodic, severe droughts are the norm. As the underlying global trends in climate interact with the continent’s patterns of natural variability, producers can generally deal with gradual changes in climate but are most concerned about high rates of change in regional and local climates and with abrupt, unexpected shifts in climate patterns. Perhaps the best indicator of dangerous climate change for Australian agriculture is the persistence, or not, of the drying trends in many of the Country’s most productive regions and the strength of the linkage between these trends and global climate change.