Zn/Fe体系湿法催化氧化高效脱除沼气中H2S的研究

提出了Zn/Fe体系湿法催化氧化脱除沼气中H2S新工艺,阐述了反应机理、实验装置和工艺流程,考察了各单因素操作条件对H2S脱除效率的影响,在此基础上进行的综合条件实验,脱硫效率都维持在99.6%以上,净化后沼气中H2S含量低于国家标准。过程不消耗任何化工原料,不产生二次污染,体系无降解问题。     

Simulated reaction of formaldehyde and ambient atmospheric particulate matter using a chamber

The reaction of HCHO with Beijing winter's real ambient particulate matter(PM) inside a 3.3 m~3 Teflon Chamber was conducted in this study. NO_2, O_3 and H_2O gases were removed from the ambient aerosol before entering into the chamber. The decays of HCHO were monitored(acetylacetone spectrophotometry method) during the reactions at different PM number concentrations(N_a) and relative humidities(RHs), and the formed particulate formate was detected by IC and XPS techniques. The results showed that when RH was10%–15%, the decay rate of HCHO in the chamber was higher with the existence of PM from relatively clean days(with number concentration(N_a) 200,000 particle/L, 0.35–22.5 μm)compared to dirty days(N_a 200,000 particle/L, 0.35–22.5 μm). When RH increased to 30%–45%, PM can hardly have significant influences on the decay of HCHO. The formations of formate on the reacted PM were consistent with the HCHO decay rates at different ambient PM N_aand RH conditions. This is a first study related to the "real" ambient PM reacted with HCHO and suggested that in the clean and low RH days, PM could be an effective medium for the conversion of HCHO to formate.     

电流密度对BDD电极电化学矿化吲哚的影响与机制

掺硼金刚石膜(BDD)电极电化学氧化法是去除难降解有机污染物的有效手段.与总有机碳(TOC)等的测定相比,气态中间产物的逸出量能够更直观有效地反映有机物的矿化程度与去除效果.本研究以吲哚为代表性污染物,通过对比不同电流密度(10、20和30 m A·cm-2)下BDD电极对吲哚的去除率与矿化率,结合降解过程中碳和氮形态的变化与守恒情况,分析吲哚的降解机制.结果表明,BDD电极对吲哚有良好的去除效果,电流密度为10、20、30 m A·cm-2时,吲哚达到100%去除的时间分别为8、5和4 h;TOC去除率、CO_2产生量均随电流密度的增加而增大,证明矿化率与电流密度成正相关;电解产生的CO_2气体与TOC、无机碳(TIC)构成了碳守恒体系.4~5 h时,体系TOC、TON和CO_2产生量均没有变化,表明电解产生的靛红具有较高的稳定性,此时为中间产物积累阶段;XPS表征进一步证实了中间产物靛红、苯醌等在电极表面的吸附,随着电解时间的延长,这些吸附的中间产物可进一步被降解.本研究从气态产物检测及碳氮形态分析与守恒的角度阐释吲哚矿化过程,对于辅助揭示有机物的电解过程有重要意义.     

车装焊复合加工装备的服役可靠性评估

目的评估某型航天用车装焊复合加工装备在服役过程中的服役可靠性。方法首先分析装备常见的故障模式,统计装备在使用过程中的故障数据,由于装备故障数据样本量较少,所以提出基于贝叶斯理论的小样本车装焊复合加工装备可靠性评估方法,其中通过马尔科夫链蒙特卡罗(MCMC)法抽样解决贝叶斯理论中后验积分复杂的问题。结果确定了车装焊复合加工装备的寿命威布尔分布模型,并运用贝叶斯方法,计算出该车装焊复合加工装备的平均无故障工作时间(MTBF)。结论评估结果略低于设计要求,原因是目前该装备处于服役初期,服役初期故障数据较多。待进入稳定服役期时,故障率会有一定程度的降低后趋于稳定,MTBF会有一定幅度的增加,所以该车装焊复合加工装备MTBF基本满足设计要求。     

Heterogeneous oxidation of SO2 by O3-aged black carbon and its dithiothreitol oxidative potential

Ozone (O₃) is an important atmospheric oxidant. Black carbon (BC) particles released into the atmosphere undergo an aging process via O₃ oxidation. O₃-aged BC particles may change their uptake ability toward trace reducing gases such as SO₂ in the atmosphere, leading to different environmental and health effects. In this paper, the heterogeneous reaction process between O₃-aged BC and SO₂ was explored via in-situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). Combined with ion chromatography (IC), DRIFTS was used to qualitatively and quantitatively analyze the sulfate product. The results showed that O₃-aged BC had stronger SO₂ oxidation ability than fresh BC, and the reactive species/sites generated on the surface had an important role in the oxidation of SO₂. Relative humidity or 254 nm UV (ultraviolet) light illumination enhanced the oxidation uptake of SO₂ on O₃-aged BC. The oxidation potentials of the BC particles were detected via dithiothreitol (DTT) assay. The DTT activity over BC was decreased in the process of SO₂ reduction, with the consumption of oxidative active sites.     

地表参数对面源大气预测结果的影响性分析研究

为了研究地表参数取值对AERMOD中面源模拟预测浓度值的影响,文章通过改变粗糙度、反照率和波文比的取值来进行不同地表参数与预测结果的相关性分析,同时采用正交试验法来研究不同地表参数对预测结果的敏感性.相关性分析表明,不同地表参数和预测结果有着很高的相关性.敏感性分析表明,反照率数值变化对小时最大落地浓度的敏感性最大,粗糙度数值变化对日均和年均最大落地浓度的敏感性最大.通过研究可以看出在面源大气预测过程中合理选择地表参数值是准确预测的前提.     

双台子河口湿地植被修复生境健康评价方法研究

以2014—2015年双台子河口滨海湿地植被修复20个站位调查资料为基础,对湿地修复结构指标、功能指标和环境指标进行研究,结合湿地生态系统健康理论,构建湿地生态环境健康评价指标体系。运用层次分析法(AHP)确定权重,对各个指标赋予权重,将健康评价分为3个等级,确立了生态健康评价方法,对近岸破损湿地翅碱蓬修复生境进行评价。进一步引用评价净影响值(EI)方法判断生境修复前、后的健康对比状态,从而确定翅碱蓬对该破损湿地的修复效果显著。从景观生态学和健康评价角度分析来看,建立此评价方法是可行的,可为今后湿地的管理与保护提供科学依据。     

浸入式短流程超滤膜生产工艺过程膜污染的形成与控制

以江苏芦泾水厂膜技术改造工程为对象,从水质、膜工艺特征结合生产运行过程以及污染膜的清洗进行了分析,目的是了解膜污染的组分构成,评价不同清洗剂的清洗效果,获取较优的清洗顺序.结果表明,原水以憎水酸(HOA)和亲水组分(HIM)为主体,质量分数各占40.34%和28.48%.溶解性有机物(DOM)则以芳香性蛋白质Ⅱ类物质为...     

焦化废水处理工程调试运行研究

针对焦化废水处理调试运行存在的问题,以实际运行中的焦化废水处理工程为例,介绍了其调试运行过程.指出焦化废水调试及稳定运行的控制要点,并提出调试运行过程中可能出现的问题及解决措施,为同类废水的调试和运行提供参考.     

生物难降解有机污染物的治理对策

针对废水中难降解化学合成有机污染物的种类和数量不断增加，生物处理出水达标困难的现状，总结了国内外的经验和研究成果，对现有处理装置改造提出了若干建议，并介绍了几种国外废水处理新技术。