高性能纤维在个体防护装备上的应用现状及前景分析

高性能纤维是从化学纤维演化而来,是指耐高温、耐气候、耐化学腐蚀、质量轻、强度高、模量高的特种纤维材料。本文结合几种典型的高性能纤维的具体性能,对高性能纤维在个体防护装备上的应用现状及前景作了分析,旨在进一步推动高性能纤维在个体防护装备上的应用,从而在不同的使用情况下增强个体防护装备对人体的保护功能。     

交际教学法在大学英语教学中的应用

交际法已经发展成为一种世界规模的外语教学理论和教学方法,成为当今世界各国外语教学界普遍承认和接受的基本原则.通过对交际教学法的进一步研究分析,叙述了什么是交际教学法,阐述了运用交际教学法组织大学英语教学的模式和交际教学法在大学英语教学中的运用,指出教师应充分运用交际教学法的基本原理更好地来提高中国英语教学水平.     

Leaching behavior of heavy metals from municipal solid waste incineration bottom ash and its geochemical modeling

With the increase in the number of municipal solid waste incineration (MSWI) plants constructed in China recently, great attention has been paid to the heavy metal leaching toxicity of MSWI residues. In this study, the effects of various parameters, including extractant, leaching time, liquid-to-solid ratio, leachate pH, and heavy metal content, on the release properties of Cd, Cr, Cu, Ni, Pb, and Zn from MSWI bottom ash were investigated. Partial least-squares analysis was employed to highlight the interrelationships between the factors and response variables. Both experimental research and geochemical modeling using Visual MINTEQ software were conducted to study the pH-dependent leaching behavior of these metals in fresh and weathered bottom ash, considering precipitation/dissolution and surface complexation reactions (adsorption by hydrous ferric oxide and amorphous aluminum oxide/hydroxide). The results showed that leachate pH was the predominant factor influencing heavy metal leachability. The leaching of Cu, Pb, and Zn was mainly controlled by precipitation/dissolution reactions, whereas surface complexation had some effect on the leaching of Cr, Cd, and Ni for certain pH ranges. The modeling results aggreed well with the experimental results. Part of this work was presented at the Fourth International Conference on Combustion, Incineration/Pyrolysis and Emission Control (i-CIPEC)     

活性污泥对甲醛废水的净化性能

采用微生物法处理低浓度甲醛废水达标排放是比较经济的方法之一.在研究中采用序批式活性污泥法(SBR)工艺,考察了曝气时间、进水甲醛浓度、进水 pH 和水温对微生物净化低浓度甲醛废水的影响.结果表明,随着曝气时间的延长,活性污泥对甲醛的去除率增大.进水甲醛浓度在 40～120 mg/L 范围内,随着浓度升高甲醛污泥负荷增加,微生物对甲醛的降解速率增加,但对甲醛的去除率降低.活性污泥在 pH 为 5～7 的中性和弱酸性环境中对甲醛的降解速率较高.在15～35℃范围内,污泥对废水中甲醛的去除率随温度升高而上升,微生物对甲醛的降解速率随温度升高呈指数递增趋势.     

区域水战略方案选优的动态组合评价模型研究

水安全危机是人类进入新世纪以来在生存及发展方面所面临的最严重挑战之一。研究科学合理的水安全战略成为区域可持续发展的重大课题。针对区域水战略问题涉及众多因素且各因素之间动态关联的特点,提出了基于水战略方案优选的兼容度极大化动态组合评价模型（CMM—DCEM）,并将其成功地应用于我国广东省北江下游及其三角洲地区水安全战略方案优选评价。评价结果及模型基于不确定性的敏感性分析结果证明：CMM—DCEM实现了主、客观赋权方法以及单一评价模型的融合,使用实码加速遗传算法求解目标函数,克服了传统的组合评价方法计算繁琐的不足,评价过程更加科学合理。     

污水灌溉风险概率分布的研究

针对目前我国水资源紧缺、用大量污水进行农田灌溉造成环境污染的现状,指出了污水灌溉风险研究中的不足.利用农业干旱模型,通过非参数检验对污水灌溉风险的概率分布进行了研究,并利用江苏省南京地区某污灌区的实际资料,计算了当地污水灌溉风险的概率分布.     

废旧电池资源化、无害化

对当前国内外在废旧电池的处理处置方面进行了综合性论述,对废旧电池的危害及当前应采取的对策进行分析。     

北方泥炭地泥炭土矿化速率、温度敏感性及其影响因素研究

北方泥炭地是全球重要的碳汇,也是全球变暖最为敏感的区域之一.然而,由于泥炭地表层和亚表层泥炭土碳排放过程对全球变暖的响应过程及机制仍存在一定争议,目前对全球变暖背景下泥炭地碳排放的认识仍存在一定不足.本研究于2019年8月在大兴安岭满归泥炭地采集表层(0～10 cm)和亚表层(15～30 cm)泥炭土进行室内增温模拟有氧培养,测定其矿化速率、有机质性质和水解酶活性.结果表明,表层泥炭土矿化速率在5、15、25℃下培养时((142.8±66.9)～(545.3±30.6)、(575.0±62.1)～(1843.0±547.4)、(888.4±123.9)～(3646.7±167.9)μg·g^-1·d^-1)均高于亚表层((113.0±41.5)～(367.1±64.1)、(357.4±52.3)～(1122.1±218.8)、(697.1±38.1)～(2336.4±150.6)μg·g^-1·d^-1),但表层和亚表层矿化作用的温度敏感性不具有显著差异;培养过程中,表层与亚表层泥炭土β-1,4-N-乙酰葡...     

Improve Compliance with Limited Resources by a Three-Group Inspection Regime

Frequent monitoring and relatively high fines are usually necessary to bring about improvements in environmental quality, but more challenging for many countries with limited human, material, and financial resources is to put them into practice. This paper developed a three-group model of a state-dependent enforcement in a repeated game to improve the policy implementation under limited inspection capacities. A certain number of firms are grouped (group 1, group 2, group 3) for different supervision intensity (e.g., the order of inspection probability corresponding to each group is p ₁?<?p ₂?<?p ₃) based on their environmental performance. The optimal policy parameters, such as inspection probability of each group and the probability that a firm found in compliance is moved to a better reputation group, were obtained as the basis for regulator’s policy making. Numerical simulations indicated that the three-group inspection regime can significantly increase compliance rate as compared with static enforcement with the same monitoring probability. Among the number of firms in each group under steady state conditions, group 2 had the most, group 1 was the second, and group 3 had the smallest. Analysis and prediction of a three-group reputation example provided a good experiment for the model. The results give a practical reference for the policy makers with inspection capacity constraints to achieve higher compliance rate.     

Effects of pig manure containing copper and zinc on microbial community assessed via phospholipids in soils

Pig manure (PM) is widely used as an organic fertilizer to increase yields of crops. Excessive application of compost containing relatively great concentrations of copper (Cu) and zinc (Zn) can change soil quality. To clarify the effects of different rates of application and to determine the optimal rate of fertilization, PM containing 1,115 mg Cu kg^?1, dry mass (dm) and 1,497 mg Zn kg^?1, dm was applied to alkaline soil at rates of 0, 11, 22, 44, 88, and 222 g PM kg^?1, dm. Phospholipid fatty acids (PLFAs) were used to assess soil microbial community composition. Application of PM resulted in greater concentrations of total nitrogen (TN), NH₄ ⁺-N, NO₃ ^?-N, total carbon (TC), soil organic matter (SOM) but lesser pH values. Soils with application rates of 88–222 g PM kg^?1, dm had concentrations of total and EDTA-extractable Cu and Zn significantly greater than those in soil without PM, and concentrations of T-Cu and T-Zn in these amended soils exceeded maximum limits set by standards in china. Except in the soil with a rate of 11 g PM kg^?1, dm, total bacterial and fungal PLFAs were directly proportional to rate of application of PM. Biomasses of bacteria and fungi were significantly greater in soils with application rates of 44–222 g PM kg^?1, dm than in the soil without PM. SOM, TC and EDTA-Zn had the most direct influence on soil microbial communities. To improve fertility of soils and maintain quality of soil, rate of application should be 22–44 g PM kg^?1 dm, soil containing Cu and Zn.