纳米生态基对水产养殖污水的处理效果

采用三因子四水平的正交设计,实验研究了纳米生态基在不同温度、溶解氧和水力停留时间下对水产养殖污水的处理效果,确定了纳米生态基处理养殖污水的最佳条件。结果表明,含氨氮和亚硝氮浓度较高的模拟养殖污水用纳米生态基挂膜,所需时间约为22 d。纳米生态基对氨氮的去除效果明显,平均去除率达到93.5%。对氨氮去除率的影响程度,水力停留时间>温度>溶解氧。当温度为30℃,DO为5.43 mg/L,HRT为0.33 h时,纳米生态基对氨氮的处理能力最佳,去除率达到94.6%。纳米生态基对亚硝氮的平均去除率为69.3%。对亚硝氮去除率的影响程度,水力停留时间>溶解氧>温度。当温度为21℃,DO为6.40 mg/L,HRT为0.33 h时,纳米生态基对亚硝氮的处理能力最佳,去除率为71.5%。纳米生态基处理养殖污水的最佳条件:温度为30℃,DO为6.40 mg/L,HRT为0.33 h。     

我国主要蔬菜和粮油作物的砷含量与砷富集能力比较

根据国内外文献报道,对蔬菜和粮油作物中砷的累积特点和富集能力进行总结和分析.结果表明.清洁区和污染区蔬菜的砷含量变幅分别为0.001-1.07 mg·kg-1和0.001-8.51 mg·kg-1(鲜重),均值分别为0.035 mg·kg-1和0.068 mg·kg-1不同种类蔬菜的砷含量由大到小,依次为:叶菜类>根茎类>茄果类>鲜豆类;清洁区和污染区粮油作物的砷含量变幅分别为0.001-2.20 mg·kg-1和0.007-6.83 mg·kg-1(干重),均值分别为0.081 mg·kg-1和0.294 mg·kg-1,其中水稻的砷含量显著高于小麦和玉米.从富集系数来看,叶莱类蔬菜的砷富集系数最高,芹菜、蕹菜、茼蒿、芥菜等蔬菜的抗砷污染能力较弱.粮食作物玉米的抗砷污染能力较强.与蔬菜砷限量标准(GB4810-1994)相比,我国砷污染区的蔬菜中有32.2%的样本砷含量超标,其中叶菜类和根茎类的超标率分别为47.9%和12.8%.与粮食砷限量标准(GB4810-1994)比较,我国污染区粮油作物的样本砷超标率为34.8%,其中水稻的超标率高达42.9%.玉米和小麦的超标率均高于20%.     

BiFeO3可见光催化降解甲基紫

采用柠檬酸-硝酸盐燃烧法制备了光催化剂BiFeO₃。采用SEM,XRD,FTIR等技术对光催化剂BiFeO₃进行表征。表征结果显示,光催化剂BiFeO₃晶相纯、粒径小、比表面积大,存在Fe#x02014;O的弯曲振动和伸缩振动。实验结果表明：通过鼓气及加入H₂O₂可有效提高BiFeO₃对甲基紫可见光催化降解的效率;在300mL质量分数为1.5#x000d7;10^-5的甲基紫溶液中加入0.9g光催化剂BiFeO₃和0.1mL质量分数为30%的H₂O₂溶液,当反应时间为240min时,甲基紫去除率可达99%。     

水质安全的动态超声波强化混凝除藻水处理试验研究

超声波辐射能够破坏蓝藻气囊,在水处理工艺中达到强化蓝藻混凝沉淀的效果.然而不适当的超声处理会进一步破坏蓝藻细胞,导致胞内毒素大量释放,加重水质污染负荷.本研究为获得水质安全的超声波强化混凝沉淀蓝藻水处理方法,采用频率40~120 k Hz的超声波辐射蓝藻水,考察处理后蓝藻混凝沉淀去除效果及藻毒素释放情况.结果表明,频率68~120 k Hz、能量密度59.1~186.4 W·L-1的静态超声波作用10~15 s后进行混凝沉淀,藻类去除率达98%以上,且频率越高效果越好;然而各频率静态超声波作用5 s以上均会导致藻细胞内藻毒素释放.采用内衬吸声棉及动态超声方式,频率120 k Hz、能量密度38.5~196.6 W·L-1超声波作用7.5~30 s后,可避免胞内藻毒素释放,且能去除水中溶解性藻毒素18.7%~30.7%,混凝沉淀后藻类去除率97.0%以上,其它有机物也降低.     

西安市大气中多环芳烃的季节变化及健康风险评价

对西安市2009年6月-2010年5月空气中的总悬浮颗粒（TSP）和气态样品进行了连续采样,利用GC—MS对16种PAHs进行分析。∑PAHs浓度（气相＋颗粒相）范围为39．93～1032．46ng／m^3,平均值为197．34ng／m^3;其中,冬季大气中∑PAHs浓度最大,相对浓度的范围为31．21％～72．98％,而夏季的浓度最小;检测出16种2～6环的PAHs,其中以3—4环为主。利用特征分子比值法和因子分析进行源解析,发现研究区PAHs的主要来源为燃煤和机动车尾气排放。通过苯并（a）芘（BaP）等效毒性（BEQ）和苯并（a）芘等效致癌浓度（BaPE）进行健康风险评价,结果显示,西安大气中PAHs的毒性具有明显的季节差异,特别是秋季和冬季大气中PAHs对人类的健康存在较大的潜在威胁。     

Mesoporous carbon nanomaterials induced pulmonary surfactant inhibition, cytotoxicity, inflammation and lung fibrosis

Environmental exposure and health risk upon engineered nanomaterials are increasingly concerned. The family of mesoporous carbon nanomaterials(MCNs) is a rising star in nanotechnology for multidisciplinary research with versatile applications in electronics,energy and gas storage, and biomedicine. Meanwhile, there is mounting concern on their environmental health risks due to the growing production and usage of MCNs. The lung is the primary site for particle invasion under environmental exposure to nanomaterials. Here, we studied the comprehensive toxicological profile of MCNs in the lung under the scenario of moderate environmental exposure. It was found that at a low concentration of 10 μg/mL MCNs induced biophysical inhibition of natural pulmonary surfactant. Moreover, MCNs at similar concentrations reduced viability of J774 A.1 macrophages and lung epithelial A549 cells.Incubating with nature pulmonary surfactant effectively reduced the cytotoxicity of MCNs.Regarding the pro-inflammatory responses, MCNs activated macrophages in vitro, and stimulated lung inflammation in mice after inhalation exposure, associated with lung fibrosis.Moreover, we found that the size of MCNs played a significant role in regulating cytotoxicity and pro-inflammatory potential of this nanomaterial. In general, larger MCNs induced more pronounced cytotoxic and pro-inflammatory effects than their smaller counterparts. Our results provided valuable information on the toxicological profile and environmental health risks of MCNs, and suggested that fine-tuning the size of MCNs could be a practical precautionary design strategy to increase safety and biocompatibility of this nanomaterial.     

采用支持向量机算法优化电化学处理油田污水的工艺参数

采用支持向量机(SVM)算法,将Box-Behnken设计法与支持向量回归算法(SVR)实验参数优化软件相结合,优化电化学去除油田污水COD的工艺参数。通过量子粒子群算法对SVM算法参数进行优化,从建立的回归模型中找到工艺参数的全局最佳点:电解时间60 min,电解电流3 A,三维电极填充料中石英砂质量695 g。模型得到的COD理论最优去除率为92.48%,验证实验得到的COD去除率为91.43%。     

基于RSM模型对污泥联合调理的参数优化

研究了CaO、PAFC联合表面活性剂(1227)预处理对污泥脱水性能的影响,以污泥滤饼含水率(WC)和毛细吸水时间(CST)作为评价指标进行单因素实验,得出药剂投加量的最佳范围.然后通过以响应曲面优化法(RSM)为依据的Box-Behnken实验,建立了滤饼含水率和CST减少率二次多项式预测模型,进而得到联合调理的最佳工艺参数.结果表明,联合调理能够明显提高污泥的脱水性能,CaO、PAFC和1227的最佳药剂量分别为42.00,60.40,80.89mg/g,此条件下滤饼含水率为(68.30±0.26)%,CST减少率为(87.30±0.32)%.同时,在最优条件下进行了验证实验,结果与模型预测值基本吻合,表明基于响应曲面法所得的最佳工艺参数准确可靠,对相关污泥处理及条件优化具有一定的指导意义.     

Risk assessment of potentially toxic element pollution in soils and rice (Oryza sativa) in a typical area of the Yangtze River Delta

Soil pollution with potentially toxic elements (PTEs) resulting from rapid industrial development has caused major concerns. Selected PTEs and their accumulation and distribution in soils and rice (Oryza sativa) collected from Changshu, east China, were analyzed to evaluate the potential health risk to the local population. The soils were primarily contaminated with Hg, followed by Cu, Cd, Pb, and Zn. The concentrations of Pb, Hg, and Cd of 46, 32, and 1 rice samples exceeded their national maximum allowable levels in foods, respectively. Spatial distributions of total Cr, Cu, Pb, Zn, and Cd in soils shared similar geographical trends. The risk assessment of PTEs through rice consumption suggests that the concentrations of Cu, Pb, and Cd in some rice samples exceed their reference oral dose for adults and children. In general, there was no target hazard quotient value of any individual element that was greater than 1, but hazard index values for adults and children were 1.726 and 1.523, respectively.     

表面活性剂对多壁碳纳米管吸附Pb2+的影响

多壁碳纳米管(MWNT)在吸附有毒气体和重金属离子方面具有极高的应用价值.针对MWNT对水溶液中Pb2+的净化吸附进行了研究,从吸附量,吸附速率、动力学角度考察了表面活性剂、Pb2+浓度对MWNT吸附Pb2+的影响.结果表明,司班-60、吐温-20、阿拉伯树胶等表面活性剂的加入,促进了MWNT在溶液中的分散,导致在Pb2+摩尔浓度为3～18 mmol/L的Lang-muir和Freundlich等温吸附方程中的吸附常数(K)变大,使得MWNT对Pb2+的吸附速率和平衡吸附量都得到提高;随着溶液中Pb2+浓度的增大,MWNT对其吸附量渐至饱和,随后由于Pb2+的位阻作用.吸附量下降;在这3种表面活性剂中,由于司班-60具有相对较小的分子量,其分散的MWNT在Pb2+摩尔浓度为14 mmol/L时,吸附量最大,为230 mg/g.