Forest structure and regeneration along the altitudinal gradient in the Binsar Wildlife Sanctuary,Uttarakhand Himalaya,India

Forest structure and regeneration were studied along the altitudinal gradient in the Binsar Wildlife Sanctuary of Uttarakhand Himalaya in India. Stratified random sampling of tree species was done by placing minimum 15 quadrats of 10 × 10 m at each aspect and altitude. The results reveal that along the altitudinal gradient there were three types of forest communities in the Sanctuary viz., chir pine (Pinus roxburghii), oakchir pine (Quercus leucotrichophora and Pinus roxburghii) and oak (Quercus floribunda and Quercus leucotrichophora). Rhododendron arboreum, Cornus macrophylla and Lyonia ovalifolia were main associates of these forest communities. The oak forests had larger shrub population as compared to chir pine. Myrsine africana was the most dominant shrub across the altitudinal gradient, whereas few shrub species were restricted to a certain altitudinal range. The regeneration of chir pine was best at lower altitude on south and east aspects, which indicates that it mostly regenerates on warm and dry slopes. In general, the regeneration potential in most of the tree species declines with the altitude. The density of saplings and seedlings also represented the dominant species at each altitudinal range, which indicates the cyclic regeneration of forests in the Sanctuary area.     

Local level community forest management an effective tool in conserving forest biodiversity

Forest vegetation of a community managed forest (Van Panchayat) located between 1570–1700 m elevation was studied along four aspects. Quercus leucotrichophora was the dominant species on three of the four aspects. Across the aspects the total tree density ranged between 150 and 490 ind/ha, sapling density between 100 and 370 ind/ha, seedling density varied from 241 to 1090 ind/ha. The shrub density ranged from 166 to 690 ind/ha and herb density from 6000–17100 ind/ha. The total basal area of tree layer varied from 9.78 to 13.5 m²/ha showing that the forest is young. Species diversity value for tree layer varied from 0.14 to 1.69. Quercus leucotrichophora were regenerating well due to effective forest management by local communities. The higher proportion of seedlings of Quercus leucotrichophora indicating that the Van Panchayat are playing important role in conservation of oak forest of Himalaya.     

Bioaccumulation and lack of oxidative stress response in the ragworm H. diversicolor following exposure to Ra in sediment

The main effluent from oil and gas production, produced water, from some platforms in the North Sea contains elevated concentrations of ²²⁶Ra. The aim of this study was to investigate whether ²²⁶Ra in sediment would accumulate in and affect sediment-dwelling organisms. In addition, we wanted to determine if the bioavailability would be modulated by the presence of a scale inhibitor which is used during oil and gas production. Hediste diversicolor was therefore exposed to different levels of ²²⁶Ra (30–6600 Bq kg⁻¹) in combination with scale inhibitor in the sediments in a flow through system. The levels of radioactivity in the exposures were close to levels that can be measured in proximity to oil/gas production facilities. ²²⁶Ra spiked to natural sediment partitioned into pore water and accumulated in the sediment-dwelling polychaete following a four-week exposure period. The results suggest that ²²⁶Ra did not bind strongly to sediment (low sediment:water partitioning coefficient), but it was not shown to bioaccumulate in any great extent (bioaccumulation factors of 0.019–0.022). Exposure of H. diversicolor in sediments with up to 6600 Bq kg⁻¹²²⁶Ra had no measurable effect on the total oxyradical scavenging capacity of the organisms compared to control. So although they accumulated the alpha-emitter, the treatments did not appear to cause oxidative stress in polychaete tissues.     

Productivity of rainfed wheat as affected by climate change scenario in northeastern Punjab, India

Wheat (Triticum aestivum L.) is grown as a rainfed crop in the sub-mountainous region of the Punjab state of India, with low crop and water productivity. The present study aims to assess the effect of climate change scenario (A1B) derived from PRECIS—a regional climate model—on wheat yield and water productivity. After minimizing bias in the model climate data for mid-century (2021–2050), evapotranspiration (ET) and yield of wheat crop were simulated using Decision Support System for Agrotechnology Transfer, version 4.5, model. In the changed climate, increased temperature would cause reduction in wheat yield to the extent of 4, 32 and 61 % in the mid-century periods between 2021–2030, 2031–2040 and 2041–2050, respectively, by increasing water stress and decreasing utilization efficiency of photosynthetically active radiation. The decreases in crop water productivity would be 40, 56 and 76 %, respectively, which are caused by decreased yield and increased ET. Planting of wheat up to November 25 till the years 2030–2031 seems to be helpful to mitigate the climate change effect, but not beyond that.     

An Improved Rating System for Assessing Surface Water Contamination Potential from MSW Landfills

Leachate emission from uncontrolled municipal solid waste landfills (referred to as waste sites in the present study) is a major threat to the environment and living beings in its vicinity. Surface water contamination potential resulting from leachate may be used as one of the criteria for prioritization of sites for remediation purposes. The existing hazard rating systems that prioritize waste sites considering surface water contamination potential as one of the criteria are mainly suited for the developed countries where these were developed initially. In developing countries like India, the set of conditions differ from those in developed countries, and therefore the existing systems may not be suitable for developing countries. Thus in the present study, an improved system is proposed to assess surface water contamination potential from MSW sites. The system is based on the concept of Source, Pathway and Receptor. The proposed system employs parameters derived from the review of existing rating systems and selects their best and worst values based on literature review, design standards and field conditions. The importance weights of the system parameters have been decided based on expert judgment using Delphi technique. Sensitivity analysis of the system shows that the improved system is more sensitive than the existing systems for the site conditions encountered in developing countries. Monte Carlo analysis of the proposed system confirms the spread of the scores obtained from the system over the full scale of 0–1000. The improved system is compared with existing systems by applying it to waste sites from metropolitan cities of India and performing clustering analysis on the rating scores. The clustering analysis shows that the rating scores from the improved system are less clustered as compared to the scores from the existing systems. This demonstrates that the improved system makes a better tool to distinctly prioritize the waste sites for remediation purpose.     

Catalase and ascorbate peroxidase—representative H<Subscript>2</Subscript>O<Subscript>2</Subscript>-detoxifying heme enzymes in plants

Plants have to counteract unavoidable stress-caused anomalies such as oxidative stress to sustain their lives and serve heterotrophic organisms including humans. Among major enzymatic antioxidants, catalase (CAT; EC 1.11.1.6) and ascorbate peroxidase (APX; EC 1.11.1.11) are representative heme enzymes meant for metabolizing stress-provoked reactive oxygen species (ROS; such as H₂O₂) and controlling their potential impacts on cellular metabolism and functions. CAT mainly occurs in peroxisomes and catalyzes the dismutation reaction without requiring any reductant; whereas, APX has a higher affinity for H₂O₂ and utilizes ascorbate (AsA) as specific electron donor for the reduction of H₂O₂ into H₂O in organelles including chloroplasts, cytosol, mitochondria, and peroxisomes. Literature is extensive on the glutathione-associated H₂O₂-metabolizing systems in plants. However, discussion is meager or scattered in the literature available on the biochemical and genomic characterization as well as techniques for the assays of CAT and APX and their modulation in plants under abiotic stresses. This paper aims (a) to introduce oxidative stress-causative factors and highlights their relationship with abiotic stresses in plants; (b) to overview structure, occurrence, and significance of CAT and APX in plants; (c) to summarize the principles of current technologies used to assay CAT and APX in plants; (d) to appraise available literature on the modulation of CAT and APX in plants under major abiotic stresses; and finally, (e) to consider a brief cross-talk on the CAT and APX, and this also highlights the aspects unexplored so far.     

Persistence of hexaconazole, a triazole fungicide in soils

Persistence of hexaconazole (2-(2,4-dichlorophenyl)- 1-(1H-1,2,5-triazol-1-yl) hexan-2-ol) was studied in alluvial, red and black soils under flooded and nonflooded conditions. This fungicide was more persistent in all soils under flooded conditions than under nonflooded conditions and at 27 degrees C than at 35 degrees C. Degradation of hexaconazole in sterilized and nonsterilized soils proceeded at identical rates indicating a minor role of micro-organisms in its degradation. The soil persistence of hexaconazole was not affected by the addition of wheat straw both under flooded and nonflooded conditions.     

Dissipation of some organochlorine insecticides in cropped and uncropped soil

Dissipation of four organochlorine insecticides, viz. aldrin, HCH, chlordane and heptachlor was studied in a sandy loam soil with and without crops during a period of 10 cropping seasons. Dissipation of all chemicals followed first-order kinetics (r(2)=0.537 - 0.976) with almost similar persistence in cropped and uncropped soils for all the insecticides. The average half-lives, (t(1/2) values) for total residues of aldrin, HCH, chlordane, and heptachlor in cropped treatments were 80.7, 58.8, 93.2, and 110 days. Their respective values in fallow plots were 78.4, 83.8, 154, and 116 days. None of the parent compounds or their isomers could be detected below the 20 cm depth at the termination of the experiment. Highest residue concentrations were observed in the surface 10 cm layer in fallow plots, but in the deeper (10-20 cm) layer in cropped plots. Analysis of plants and grains showed significant residues of all the chemicals. Degradation of these compounds in cropped and uncropped plots is discussed with regard to their volatilization, microbial degradation, leaching, and plant uptake.     

Development and preliminary evaluation of a particulate matter emission factor model for European motor vehicles

Although modeling of gaseous emissions from motor vehicles is now quite advanced, prediction of particulate emissions is still at an unsophisticated stage. Emission factors for gasoline vehicles are not reliably available, since gasoline vehicles are not included in the European Union (EU) emission test procedure. Regarding diesel vehicles, emission factors are available for different driving cycles but give little information about change of emissions with speed or engine load. We have developed size-specific speed-dependent emission factors for gasoline and diesel vehicles. Other vehicle-generated emission factors are also considered and the empirical equation for re-entrained road dust is modified to include humidity effects. A methodology is proposed to calculate modal (accelerating, cruising, or idling) emission factors. The emission factors cover particle size ranges up to 10 microns, either from published data or from user-defined size distributions. A particulate matter emission factor model (PMFAC), which incorporates virtually all the available information on particulate emissions for European motor vehicles, has been developed. PMFAC calculates the emission factors for five particle size ranges [i.e., total suspended particulates (TSP), PM10, PM5, PM2.5, and PM1] from both vehicle exhaust and nonexhaust emissions, such as tire wear, brake wear, and re-entrained road dust. The model can be used for an unlimited number of roads and lanes, and to calculate emission factors near an intersection in user-defined elements of the lane. PMFAC can be used for a variety of fleet structures. Hot emission factors at the user-defined speed can be calculated for individual vehicles, along with relative cold-to-hot emission factors. The model accounts for the proportions of distance driven with cold engines as a function of ambient temperature and road type (i.e., urban, rural, or motorway). A preliminary evaluation of PMFAC with an available dispersion model to predict the airborne concentration in the urban environment is presented. The trial was on the A6 trunk road where it passes through Loughborough, a medium-size town in the English East Midlands. This evaluation for TSP and PM10 was carried out for a range of traffic fleet compositions, speeds, and meteorological conditions. Given the limited basis of the evaluation, encouraging agreement was shown between predicted and measured concentrations.