Comparative study on water-soluble inorganic ions in PM2.5 from two distinct climate regions and air quality

Recently, air quality has significantly improved in developed country, but that issue is of concern in emerging megacity in developing country.In this study, aerosols and their precursor gas were collected by NILU filter pack at two distinct urban sites during the winter and summer in Osaka, Japan and dry and rainy seasons in Ho Chi Minh City(HCMC),Vietnam.The aims are to investigate the contribution of water-soluble inorganic ions(WSIIs) to PM_(2.5), thermodynamic characterization and possible formation pathway of secondary inorganic aerosol(SIA).The PM_(2.5) concentration in Osaka(15.8 μg/m~3) is lower than that in HCMC(23.0 μg/m~3), but the concentration of WSIIs in Osaka(9.0 μg/m~3) is two times higher than that in HCMC(4.1 μg/m~3).Moreover, SIA including NH_4~+, NO_3~-and SO_4~(2-)are major components in WSIIs accounting for 90% and 76%(in molar) in Osaka and HCMC,respectively.Thermodynamic models were used to understand the thermodynamic characterization of urban aerosols.Overall, statistical analysis results indicate that very good agreement(R~2 0.8) was found for all species, except for nitrate aerosol in HCMC.We found that when the crustal species present at high amount, those compositions should be included in model calculation(i.e.in the HCMC situation).Finally, we analyzed the characteristics of NH_4~+– NO_3~-– SO_4~(2-)system.A possible pathway to produce fine nitrate aerosol in Osaka is via the homogeneous reaction between NH_3 and HNO_3, while nonvolatile nitrate aerosols can be formed by the heterogeneous reactions in HCMC.     

Performance evaluation of using evacuated tubes solar collector,perforated fins,and pebbles in a solar still – experimental study and CO2 mitigation analysis

Environmental Science and Pollution Research - The combination of various methods of increasing evaporation rate can highly impact the performance of solar desalination. This investigation aims to...     

Applicability of sustainable urban drainage systems: an evaluation by multi-criteria analysis

Urban flooding has become more serious and worldwide in recent years, especially in the big cities of developing countries. This study uses a multi-criteria analysis (MCA) approach to evaluate the applicability of sustainable urban drainage systems (SUDS), a flood control measure, in the central part of Ho Chi Minh City, Vietnam. The output of the personal computer storm water management model along with interviews with 140 households was used to assess the efficacy and acceptability of four SUDS alternatives: rainwater harvesting, green roof, urban green space and pervious pavement. On technical performance, green roof was the best alternative, followed by pervious pavement, urban green space and rainwater harvesting. Results of the social survey, however, diverged largely from the results of the technical assessments. In particular, people generally prefer public SUDS such as urban green space and pervious pavements to household solutions. With respect to the MCA, we applied four different procedures: Borda count, pair-wise voting, range of value and analytic hierarchy process. Despite some differences, the integrated results from MCA largely agree that urban green space is the most favourable type of SUDS, followed by green roof, pervious pavement and rainwater harvesting.     

A comprehensive simulation approach for pollutant bio-transformation in the gravity sewer

A comprehensive pollutant transformation model for sewer systems is established. The model comprises fermentation, sulfate reduction and ammonification processes. Biochemical reactions related to distinct carbon sources are depicted in the model. Pollutant transformation is attributed to different biochemical reaction processes. Presently, several activated sludge models (ASMs) have been developed to describe a few biochemical processes. However, the commonly used ASM neither clearly describe the migratory transformation characteristics of fermentation nor depict the relationship between the carbon source and biochemical reactions. In addition, these models also do not describe both ammonification and the integrated metabolic processes in sewage transportation. In view of these limitations, we developed a new and comprehensive model that introduces anaerobic fermentation into the ASM and simulates the process of sulfate reduction, ammonification, hydrolysis, acidogenesis and methanogenesis in a gravity sewer. The model correctly predicts the transformation of organics including proteins, lipids, polysaccharides, etc. The simulation results show that the degradation of organics easily generates acetic acid in the sewer system and the high yield of acetic acid is closely linked to methanogenic metabolism. Moreover, propionic acid is the crucial substrate for sulfate reduction and ammonification tends to be affected by the concentration of amino acids. Our model provides a promising tool for simulating and predicting outcomes in response to variations in wastewater quality in sewers.     

Polybrominated diphenyl ethers in plastic products,indoor dust,sediment and fish from informal e-waste recycling sites in Vietnam: a comprehensive assessment of contamination,accumulation pattern,emissions, and human exposure

Residue concentrations of polybrominated diphenyl ethers (PBDEs) in different kinds of samples including consumer products, indoor dust, sediment and fish collected from two e-waste recycling sites, and some industrial, urban and suburban areas in Vietnam were determined to provide a comprehensive assessment of the contamination levels, accumulation pattern, emission potential and human exposure through dust ingestion and fish consumption. There was a large variation of PBDE levels in plastic parts of obsolete electronic equipment (from 1730 to 97,300 ng/g), which is a common result observed in consumer plastic products reported elsewhere. PBDE levels in indoor dust samples collected from e-waste recycling sites ranged from 250 to 8740 ng/g, which were markedly higher than those in industrial areas and household offices. Emission rate of PBDEs from plastic parts of disposed electronic equipment to dust was estimated to be in a range from 3.4 × 10^?7 to 1.2 × 10^?5 (year^?1) for total PBDEs and from 2.9 × 10^?7 to 7.2 × 10^?6 (year^?1) for BDE-209. Some fish species collected from ponds in e-waste recycling villages contained elevated levels of PBDEs, especially BDE-209, which were markedly higher than those in fish previously reported. Overall, levels and patterns of PBDE accumulation in different kinds of samples suggest significant emission from e-waste sites and that these areas are potential sources of PBDE contamination. Intakes of PBDEs via fish consumption were generally higher than those estimated through dust ingestion. Intake of BDE-99 and BDE-209 through dust ingestion contributes a large proportion due to higher concentrations in dust and fish. Body weight normalized daily intake through dust ingestion estimated for the e-waste recycling sites (0.10–3.46 ng/day/kg body wt.) were in a high range as compared to those reported in other countries. Our results highlight the potential releases of PBDEs from informal recycling activities and the high degree of human exposure and suggest the need for continuous investigations on environmental pollution and toxic impacts of e-waste-related hazardous chemicals.     

Effects of introducing energy recovery processes to the municipal solid waste management system in Ulaanbaatar, Mongolia

Currently, most developing countries have not set up municipal solid waste management systemswith a viewof recovering energy fromwaste or reducing greenhouse gasemissions. In this article, we have studied the possible effects of introducing three energy recovery processes either as a single or combination approach, refuse derived fuel production, incineration and waste power generation, and methane gas recovery from landfill and power generation in Ulaanbaatar, Mongolia, as a case study. We concluded that incineration process is the most suitable as first introduction of energy recovery. To operate it efficiently, 3Rs strategies need to be promoted. And then, RDF production which is made of waste papers and plastics in high level of sortingmay be considered as the second step of energy recovery. However, safety control and marketability of RDF will be required at that moment.     

Managing flood risks in the Mekong Delta: How to address emerging challenges under climate change and socioeconomic developments

Climate change and accelerating socioeconomic developments increasingly challenge flood-risk management in the Vietnamese Mekong River Delta—a typical large, economically dynamic and highly vulnerable delta. This study identifies and addresses the emerging challenges for flood-risk management. Furthermore, we identify and analyse response solutions, focusing on meaningful configurations of the individual solutions and how they can be tailored to specific challenges using expert surveys, content analysis techniques and statistical inferences. Our findings show that the challenges for flood-risk management are diverse, but critical challenges predominantly arise from the current governance and institutional settings. The top-three challenges include weak collaboration, conflicting management objectives and low responsiveness to new issues. We identified 114 reported solutions and developed six flood management strategies that are tailored to specific challenges. We conclude that the current technology-centric flood management approach is insufficient given the rapid socioecological changes. This approach therefore should be adapted towards a more balanced management configuration where technical and infrastructural measures are combined with institutional and governance resolutions. Insights from this study contribute to the emerging repertoire of contemporary flood management solutions, especially through their configurations and tailoring to specific challenges.     

Microbial abundance and community in subsurface flow constructed wetland microcosms: role of plant presence

In this research, the role of plants in improving microorganism growth conditions in subsurface flow constructed wetland (CW) microcosms was determined. In particular, microbial abundance and community were investigated during summer and winter in Phragmites australis-planted CW microcosms (PA) and unplanted CW microcosms (control, CT). Results revealed that the removal efficiencies of pollutants and microbial community structure varied in winter with variable microbial abundance. During summer, PA comprised more dominant phyla (e.g., Proteobacteria, Actinobacteria, and Bacteroidetes), whereas CT contained more Cyanobacteria and photosynthetic bacteria. During winter, the abundance of Proteobacteria was >40 % in PA but dramatically decreased in CT. Moreover, Cyanobacteria and photosynthetic bacterial dominance in CT decreased. In both seasons, bacteria were more abundant in root surfaces than in sand. Plant presence positively affected microbial abundance and community. The potential removal ability of CT, in which Cyanobacteria and photosynthetic bacteria were abundant during summer, was more significantly affected by temperature reduction than that of PA with plant presence.     

The evolution and impact of testing baghouse filter performance

In 1995, the US. Environmental Protection Agency (EPA) initiated the Environmental Technology Verification (ETV) program for the purpose of generating both independent and credible performance verification of innovative technologies and helping to accelerate acceptance of these products into the marketplace to further benefit the environment and protect public health. The EPA has approved a testing protocol under this program to verify the performance of commercially available filtration products for pulse-jet baghouses in removingfine particulate matter (aerodynamic diameter<2.5 microm; PM2.5). This verification testing protocol was later used as a basis for the development of the American Society for Testing and Materials (ASTM) Method D6830-02 and the International Organization for Standardization (ISO) Method 11057. The South Coast Air Quality Management District (SCAQMD) in California and the EPA s Office of Air Quality Planning and Standards (OAQPS) highly encourage the use of ETV/ASTM-verified filtration media. This paper highlights the evolution of the standard test methods, the EPA's and SCAQMD's regulatory activities, the benefits of using verified filtration media, and the importance of including the filter performance testing in future consideration of baghouse permitting, baghouse operation and maintenance (O&M) plans, quality assurance/quality control (QA/QC), and bag monitoring plans.     

Main and added effects of heatwaves on hospitalizations for mental and behavioral disorders in a tropical megacity of Vietnam

Environmental Science and Pollution Research - Vietnam is highly vulnerable to climate change-related extreme weather events such as heatwaves. This study assesses the association between heatwaves...