Degradation of ampicillin antibiotic in aqueous solution by ZnO/polyaniline nanocomposite as photocatalyst under sunlight irradiation

PURPOSE AND METHOD: ZnO/polyaniline nanocomposite in core-shell structure was prepared by the synthesis and adsorption of polyaniline chains on the structure of ZnO nanoparticles. Fourier transform infrared and ultraviolet-visible (UV-Vis) spectroscopy, X-ray diffraction patterns, field emission scanning electron microscopy, and transmission electron microscopy were used to characterize the composition and structure of the nanocomposite. The nanocomposite was used as an active photocatalyst for photodegradation and removal of ampicillin in aqueous solution. RESULTS: UV-Vis spectroscopy studies showed that ZnO/polyaniline nanocomposite absorbs visible light irradiation as well as ultraviolet spectrum, and therefore, it can be photoactivated under visible and ultraviolet lights. The photocatalytic activity of ZnO/polyaniline nanocomposite in degradation of ampicillin molecules in aqueous solution under natural sunlight irradiation was evaluated and compared with that of ZnO nanoparticles and pristine polyaniline. The ZnO/polyaniline core-shell nanocomposite exhibited higher photocatalytic activity compared to ZnO nanoparticles and pristine polyaniline. The effect of operating conditions (pH, ZnO/polyaniline nanocomposite dosage, and ampicillin concentration) in the photocatalytic degradation of ampicillin using ZnO/polyaniline nanocomposite was investigated. The optimum conditions for maximum efficiency of ampicillin degradation under 120 min sunlight irradiation were found as 10 mg L(-1) dosage of ZnO/polyaniline nanocomposite, ampicillin concentration of 4.5 mg L(-1), and solution pH?=?5. Under optimum operating conditions, degradation efficiency was reached to 41% after 120 min of exposure to the sunlight irradiation.     

Synthesis of CS/PVA Biodegradable Composite Nanofibers as a Microporous Material with Well Controllable Procedure Through Electrospinning

In this study, we have showed a facile route for fabrication of a novel microporous material based on chitosan (CS) and poly(vinyl alcohol) (PVA) biodegradable nanofibers that have high specific surface area, considerable porosity, and small diameter. Scanning electron microscopy, thermogravimetric analysis, differential scanning calorimetry, fourier transform infrared spectroscopy, Brunauer–Emmett–Teller surface area analysis, and CHNS/O elemental analyser were applied to characterize the fabricated CS/PVA composite nanofibers. Moreover, the influences of spinning conditions including concentration, voltage, electrospinning distance, and flow rate, on size distribution and pore diameter of the final product were systematically studied using 2^k?1 factorial design experiments, and the response surface optimization was used for determining the best synthesis parameter. The results obtained from 2^K?1 factorial design experiments showed that electrospinning parameters influenced the size distribution and pore diameter of the CS/PVA microporous material. Based on the response surface methodology, the CS/PVA product could be obtained with a high microporous diameter of 1.8 nm and a small diameter distribution of 15.0 nm under optimized conditions. The obtained results showed that the fabricated samples could be utilized in different applications.     

Improvement of digestibility of sunflower and corn residues by some saprophytic fungi

The in vitro degradation of fiber from two agricultural residues (Helianthus annuus and Zea mays) was studied using four saprophytic fungi. The changes in cellulolytic enzyme and phosphatase activities, the C/N ratio, the dry weight, the crude fiber (CF) content, and the protein and fiber digestibility coefficients were investigated in solid-state culture during a 45-day period of biodegradation. The FPase activity of Phanerochaete chrysosporium and the endoglucanase activities of P. chrysosporium and Trichoderma reesei compared to those of the other fungi were significantly (P < 0.05) high on both crop resides. Both acid and alkaline phosphatases were produced in greater amounts by P. chrysosporium than by the other fungi. The organic carbon contents of both residues were reduced more by T. reesei than by the other fungi. The fiber digestibility coefficient of untreated corn residue was higher than that of sunflower residue, but after treatment with fungi, the sunflower fiber digestibility increased more than that of corn did. Although the CF contents of both residues were decreased more by P. chrysosporium than by T. reesei, the fiber digestibility coefficients of both residues were increased more by T. reesei than by P. chrysosporium. The treatment of both crop residues increased their protein digestibility coefficients significantly compared to the control. The protein digestibility coefficients of both residues were increased more by T. reesei and P. chrysosporium than by the other fungi. In all treatments, the protein digestibility coefficient of sunflower residue was higher than that of corn residue.     

The effect of air mass origin on the ambient concentrations of Be and Pb in Islamabad, Pakistan

Concentration of radionuclides ²¹⁰Pb and ⁷Be, having half lives of 22.3 years and 53.29 days, respectively, in the surface air samples of Islamabad (33.38° N, 73.10° E and Altitude ∼536 m asl.) are measured. The non-destructive technique of gamma-spectrometry, with a high purity germanium HPGe detector, was employed for the analysis of all samples. The annual average concentrations of ²¹⁰Pb and ⁷Be in the surface air samples were determined as 0.284 ± 0.15 and 3.171 ± 1.14 mBq m⁻³, respectively. Our results have shown a seasonal variation of the concentration of ⁷Be in air samples with high values for the spring season. High concentrations for ²¹⁰Pb are obtained when air masses originate from plain areas of Pothohar region, located in the South-West, West and North West of Islamabad. Our values of concentrations show a nice agreement with the relevant reported results.     

"Novel" brominated flame retardants in Belgian and UK indoor dust: implications for human exposure

Concentrations of several “novel” brominated flame retardants (NBFRs) are reported in indoor dust samples from Belgian houses (n = 39) and offices (n = 6) and from day-care centers and schools in the West Midlands of the UK (n = 36). Using a GC-ECNI/MS method, the following NBFRs were quantified: decabromodiphenyl ethane (DBDPE) (range <20-2470 ng g⁻¹), 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE) (range <0.5-1740 ng g⁻¹), tetrabromobisphenol A-bis(2,3-dibromopropylether) (TBBPA-DBPE) (range <20-9960 ng g⁻¹), 2-ethylhexyl-2,3,4,5-tetrabromobenzoate (TBB) (range <2-436 ng g⁻¹) and bis(2-ethylhexyl)-3,4,5,6-tetrabromophthalate (TBPH) (range <2-6175 ng g⁻¹). Hexachlorocyclopentadienyl-dibromocyclooctane (HCDBCO), another NBFR, was below the detection limit of 2 ng g⁻¹ dust in all dust samples. No correlation was detected between concentrations of NBFRs and PBDEs. The ratio of TBB:TBPH in the dust samples ranged from 0.01 to 4.77 (average 0.42), compared to the ratio present in the commercial flame retardant product FM 550 (TBB:TBPH = 4:1). Furthermore, no correlation was detected between concentrations in dust of TBB and TBPH. This may suggest different sources of these NBFRs, or similar sources but compound-specific differences in their indoor fate and transport. Exposure via dust ingestion was estimated for both adults and toddlers under low-end (5th percentile), typical (median), and high-end (95th percentile concentrations) scenarios. These were calculated assuming 100% absorption of intake dust and using mean dust ingestion (adults = 20 mg d⁻¹; for toddlers = 50 mg d⁻¹) and high dust ingestion (adults = 50 mg d⁻¹; for toddlers = 200 mg d⁻¹). Typical exposure with high dust ingestion estimates for adults were 0.01, 0.2, 0.01, 0.02 and 0.08 ng kg⁻¹ bw d⁻¹ and for toddlers 0.05, 1.9, 0.08, 0.4 and 1.12 ng kg⁻¹ bw d⁻¹ for BTBPE, DBDPE, TBB, TBPH and TBBPA-DBPE, respectively. Our results showed that, similar to PBDEs, toddlers have higher exposure to NBFRs than adults. This study documents the presence of NBFRs in indoor environments, and emphasizes the need to evaluate the health implications of exposure to such chemicals.     

Hydrocarbon-utilizing microorganisms naturally associated with sawdust

Sawdust, one of the materials used as sorbent for removing spilled oil from polluted environments was naturally colonized by hydrocarbon-utilizing fungi, 1 × 10⁵-2 × 10⁵ colony forming units (CFU) g⁻¹, depending on the hydrocarbon substrate. This sorbent was initially free of hydrocarbon-utilizing bacteria. Incubating wet sawdust at 30 °C resulted in gradually increasing the fungal counts to reach after 6 months between 5 × 10⁶ and 7 × 10⁶ CFU g⁻¹, and the appearance of hydrocarbon-utilizing bacteria in numbers between 8 × 10⁴ and 3 × 10⁵ cells g⁻¹. The fungi belonged to the genera Candida (32% of the total), Penicillium (21%), Aspergillus (15%), Rhizopus (12%), Cladosporium (9%), Mucor (7%) and Fusarium (4%). Based on their 16S rRNA gene sequences the bacteria were affiliated to Actinobacterium sp. (38%), Micrococcus luteus (30%), Rhodococcus erythropolis, (19%) and Rhodococcus opacus (13%). Individual pure fungal and bacterial isolates grew on a wide range of individual pure aliphatic (n-alkanes with chain lengths between C₉ and C₄₀) and aromatic (benzene, biphenyl, anthracene, naphthalene and phenanthrene) hydrocarbons as sole sources of carbon and energy. Quantitative determinations revealed that all fungal and bacterial isolates could consume considerable proportions of crude oil, phenanthrene (an aromatic hydrocarbon) and n-hexadecane (an aliphatic hydrocarbon) in batch cultures. It was concluded that when sawdust is used as a sorbent, the associated microorganisms probably contribute to the bioremediation of oil and hydrocarbon pollutants in the environment.     

Hydraulics Near Unscreened Diversion Pipes in Open Channels: Large Flume Experiments

Most of the water diversions on the Sacramento and San Joaquin Rivers (California, United States) and their tributaries are currently unscreened. These unscreened diversions are commonly used for irrigation and are potentially harmful to migrating and resident fishes. A large flume (test section: 18.29 m long, 3.05 m wide and 3.20 m high) was used to investigate the hydraulic fields near an unscreened water diversion under ecologically and hydraulically relevant diversion rates and channel flow characteristics. We investigated all combinations of three diversion rates (0.28, 0.42, and 0.57 m³/s) and three sweeping velocities (0.15, 0.38, and 0.61 m/s), with one additional test at 0.71 m³/s and 0.15 m/s. We measured the three‐dimensional velocity field at seven cross sections near a diversion pipe and constructed regression equations of the observed maximum velocities near the pipe. Because the velocity components in three directions (longitudinal, transverse, and vertical) were significantly greater near the diversion pipe inlet compared with those farther from it, they cannot be neglected in the modeling and design of fish guidance and protection devices for diversion pipes. Our results should be of great value in quantifying the hydraulic fields that are formed around fish guidance devices to design more effective protection for fishes from entrainment into unscreened water‐diversion pipes.     

Quality of tube well water intended for irrigation and human consumption with special emphasis on arsenic contamination at the area of Punjab,Pakistan

In the present study, the tube well water quality and the associated health risks, emphasizing on arsenic contamination, were investigated in rural and urban samples from Tehsil Mailsi located in Punjab, Pakistan. Arsenic concentrations (μg/L) were ranged from 12 to 448.5 and which exceeded the WHO recommended limit (10 μg/L) in all cases. The calculated average daily dose (3.3 × 10^?0.4 to 1.2 × 10^?0.2 mg/kg day) and hazard quotient (1.1–40) reflected the potential health risk to local population due to tube well water consumption as drinking purpose. Sodium percent (Na%), sodium absorption ratio, residual sodium carbonate, Kelly’s index and magnesium absorption ratio were also determined to assess the suitability of tube well water for irrigation purpose. The resulting piper plot revealed the Na–Ca–HCO₃ type water chemistry of the area and generally alkaline environment. The spatial distribution of arsenic in the tube well waters pinpoints the significant contribution of anthropogenic activities to arsenic pollution. Nevertheless, different statistical tools, including principal component analysis, hierarchical cluster analysis and correlation matrices, revealed the contribution of both natural and anthropogenic activities and alkaline type of aquifers toward the high level of arsenic contamination.     

Carbon dioxide emission in relation with irrigation and organic amendments from a sweet corn field

Soil moisture and organic matter level affects soil respiration and microbial activities, which in turn impact greenhouse gas (GHG) emissions. This study was conducted to evaluate the effect of irrigation levels (75% [deficit], 100% [full], and 125% [excess] of reference crop evapotranspiration requirements), and organic amendments (OA) type (chicken manure [CM] and bone meal [BM]) and OA application rates (0,168, 336 and 672 kg total N ha^?1) on (i) soil physical properties (bulk density, organic matter content and soil moisture content) and (ii) soil carbon dioxide (CO₂) emissions from a highly weathered tropical Hawai'ian soil. Carbon dioxide readings were consistently taken once or twice a week for the duration of the cropping season. A drip irrigation system was used to apply the appropriate amount of irrigation water to the treatment plots. Treatments were randomly selected and corresponding organic amendments were manually incorporated into the soil. Plots were cultivated with sweet corn (Zea mays ‘SS-16’). Soil moisture content within and below the rootzone was monitored using a TDR 300 soil moisture sensor (Spectrum Technologies, Inc., Plainfield, IL, USA) connected with 12 cm long prongs. Soil bulk density and organic matter content were determined at the end of the cropping season. Analysis of variance results revealed that OA type, rate, and their interaction had significant effect on soil CO₂ flux (P < 0.05). Among the OA rates, all CM mostly resulted in significantly higher soil CO₂ fluxes compared to BM and control treatment (p < 0.05). The two highest rates of BM treatment were not significantly different from the control with regard to soil CO₂ flux. In addition, organic amendments affected soil moisture dynamics during the crop growing season and organic matter content measured after the crop harvest. While additional studies are needed to further investigate the effect of irrigation levels on soil CO₂ flux, it is recommended that in order to minimize soil CO₂ emissions, BM soil amendments could be a potential option to reduce soil CO₂ fluxes from agricultural fields similar to the one used in this study.