Estimating the human health risks from polychlorinated dioxins and furans in stack gas emissions from combustion units: implications of USEPA's dioxin reassessment

Shortly after promulgation of the Hazardous Waste Combustor MACT rule established regulatory limits for polychlorinated dioxins and furans (dioxins/furans) in incinerator stack gas, the US Environmental Protection Agency (USEPA) announced that facilities could still be required to demonstrate that stack emissions do not present an unacceptable risk to human health and the environment. Guidance for conducting this risk assessment activity, which was to be required under RCRA omnibus authority, was developed by the agency and released in 1998. The guidance represented an increase in complexity over previous documents developed by the agency and contains multiple chemical, fate and transport, and toxicological parameters which are to be used as default deterministic parameters in a complex series of algorithms which ultimately lead to numerical estimates of risk. As these changes were occurring, USEPA was also moving towards completion of its reassessment of dioxin. That series of documents has been the subject of considerable controversy and has, in several of its various drafts, proposed a number of changes, including modification of the existing toxic equivalency factor (TEF) approach and of the cancer potency factor of 2,3,7,8-tetachlorodibenzo-p-dioxin. At this time it is unclear what the impact of these changes will be on facilities progressing through the permitting process, because it is not intuitively obvious how changes in the risk assessment input parameters will impact the magnitude of the dioxinlfuran risk. In this paper, the receptor usually associated with the highest potential risk from dioxins/furans in a combustion risk assessment, the Subsistence Farmer, will be subjected to a sensitivity analysis to determine which of the multiple default input parameters will have the greatest influence on the potential cancer risk.     

Phosphorus leaching at cold temperatures as affected by wastewater application and soil phosphorus levels

Land application of wastewater in the northern-tier United States during winter months has been suggested as a means to reduce cost of building storage lagoons. A study was initiated in 1996 to assess land application of potato-processing wastewater on a 120-ha field at Park Rapids, MN. One objective of this study was to evaluate the effects of soil P levels and temperature on P leaching in soil columns. In this paper, we report the P sorption, desorption, and leaching characteristics of a high-P (>200 mg kg(-1)) and a low-P (<25 mg kg(-1)) surface soil from the wastewater irrigation site. The leaching experiment was done with wastewater at 4 +/- 2 or 10 +/- 2 degrees C. The high-P soil resulted in an equilibrium P concentration of 8.0 mg L(-1) compared with 0.14 mg L(-1) for the low-P soil. When low-P wastewater was applied to the high-P soil, the soil acted as a P source, and the total phosphorus (TP) concentration in the leachate was 3.5 times higher than the input TP concentration (C0). When high-P wastewater was applied to the high-P soil, the soil acted as a P sink retarding the TP concentration in the leachate by 80%. Phosphorus desorption was higher at 10 degrees C compared with 4 degrees C. The results showed that depending on P levels of the soil and the wastewater, reduction or increase in leachate P will occur below the surface soil. However, further mobility of this P under field conditions will depend on the volume and rate of percolating water as well as the sorption-desorption characteristics of the subsoil.     

Bioabsorbable soy protein plastic composites: Effect of polyphosphate fillers on water absorption and mechanical properties

The use of synthetic and natural bioabsorbable plastics has been severely limited due to their low stiffness and strength properties as well as their strong tendency to absorb moisture. This research focused on the development of bioabsorbable polyphosphate filler/soy protein plastic composites with enhanced stiffness, strength, and water resistance. Bioabsorbable polyphosphate fillers, biodegradable soy protein isolate, plasticizer, and adhesion promoter were homogenized and compression-molded. Physical, mechanical, and water absorption testing was performed on the molded specimens. Results showed improvements in stiffness, strength, and water resistance with increasing polyphosphate filler content up to 20% by weight. Application of a coupling agent produced further mechanical property enhancements and a dramatic improvement in water resistance, interpreted by an interfacial chemical bonding model. Examination of the fracture surfaces of the materials revealed that the addition of the polyphosphate fillers changed the failure mode from brittle to pseudo-ductile. These results suggest that these materials are suitable for many load-bearing applications in both humid and dry environments where current soy protein plastics are not usable.     

Elektronenmikroskopische Untersuchungen an den epitheloiden Zellen der Hoyer-Grosserschen Organe

The Science of Nature -