Spatially resolved detection of luminescence: a unique tool for archaeochronometry

Archaeochronometry uses luminescence dating to reveal ages of sediments and artefacts. Uncertainties in luminescence ages are partly related to the dating procedure, which uses grain separates. This is particularly true for stone surfaces, which require an imaging method for luminescence detection. Here we present the development of a novel luminescence device with high spatial resolution as well as signal-to-noise ratio and data processing software that now allows us to determine palaeodoses and potentially the dose-rate for cut sections of rocks and artefacts. The determination of the luminescence age of single mineral grains within sections and even of selected zones within grains becomes feasible, opening up a wide field of new applications.     

Prenatal diagnosis of aortic atresia by colour doppler flow mapping

A case of aortic atresia with insufficiency of mitral valve diagnosed prenatally at 33 weeks of gestation is presented. An accurate diagnosis of this fetal cardiovascular malformation was possible by application of Doppler colour flow mapping, which demonstrated (a) the absence of forward flow in the hypoplastic ascending aorta, (b) reverse flow of blood from the ductus arteriosus into the severely hypoplastic ascending aorta in the late systole, (c) pansystolic mitral valve regurgitation, and (d) absent flow across the foramen ovale as a result of premature closure of the foramen ovale.     

Bestimmung von Nitrodiphenylaminen und verwandten Verbindungen im Sickerwasser einer Rüstungsaltlast

Goal, Scope and Background

Nitrodiphenylamines can be found at abandoned military sites where the explosive 2,2′,4,4′,6,6′-hexanitrodiphenylamine (hexyl) or diphenylamine as a stabilizer of smokeless powder was handled. Aim of the present study is the development of HPLC methods for the analysis of contaminants which can be expected in particular under aerobic conditions at premises which are contaminated by nitrodiphenyl-amines and related compounds.

Methods

A list of 13 compounds which can be expected at these explosives factories was deduced from literature studies. HPLC methods were developed for the analytes. Water samples from the unsaturated zone of a former hexyl-producing factory were collected by suction cups and the material was analysed according to these procedures to demonstrate the practicability of the new methods and to verify the existence of the postulated compounds in the environment of the former nitration plant.

Results and Conclusion

The new HPLC methods are suitable for the exploration of sites contaminated by nitrodiphenylamines. Beside some hexyl its intermediates 1-chloro-2,4-dinitrobenzene, 2,4-dinitrodiphenylamine und 2,2′,4,4′-tetranitrodiphenylamine were identified in the leachate water.

Recommendation and Perspective

It is advisable to include at least these 4 compounds in the examination of former hexyl-producing plants. Several unknown peaks were observed in the HPLC-chromatogram. It is recommendable to perform further investigations of the unidentified compounds to compile a final list of analytes for military sites polluted by nitrodiphenylamines.     

Monitoring and modelling of biosphere/atmosphere exchange of gases and aerosols in Europe

Monitoring and modelling of deposition of air pollutants is essential to develop and evaluate policies to abate the effects related to air pollution and to determine the losses of pollutants from the atmosphere. Techniques for monitoring wet deposition fluxes are widely applied. A recent intercomparison experiment, however, showed that the uncertainty in wet deposition is relatively high, up to 40%, apart from the fact that most samplers are biased because of a dry deposition contribution. Wet deposition amounts to about 80% of the total deposition in Europe with a range of 10-90% and uncertainty should therefore be decreased. During recent years the monitoring of dry deposition has become possible. Three sites have been operational for 5 years. The data are useful for model development, but also for model evaluation and monitoring of progress in policy. Data show a decline in SO(2) dry deposition, whereas nitrogen deposition remained constant. Furthermore, surface affinities for pollutants changed leading to changes in deposition. Deposition models have been further developed and tested with dry deposition measurements and total deposition measurements on forests as derived from throughfall data. The comparison is reasonable given the measurement uncertainties. Progress in ozone surface exchange modelling and monitoring shows that stomatal uptake can be quantified with reasonable accuracy, but external surface uptake yields highest uncertainty.     

Evaluation of membrane bioreactor process capabilities to meet stringent effluent nutrient discharge requirements.

A six-stage membrane bioreactor (MBR) pilot plant was operated to determine and demonstrate the capability of this process to produce a low-nutrient effluent, consistent with the nutrient reduction goals for the Chesapeake Bay. Biological nitrogen removal was accomplished using a multistage configuration with an initial anoxic zone (using the carbon in the influent wastewater), an aerobic zone (where nitrification occurred), a downstream anoxic zone (where methanol was added as a carbon source), and the aerated submerged membrane zone. The capability to reliably reduce effluent total nitrogen to less than 3 mg/L as nitrogen (N) was demonstrated. A combination of biological (using an initial anaerobic zone) and chemical (using alum) phosphorus removal was used to achieve effluent total phosphate concentrations reliably less than 0.1 mg/L as phosphorus (P) and as low as 0.03 mg/L as P. Alum addition also appeared to enhance the filtration characteristics of the MBR sludge and to reduce membrane fouling. Aeration of the submerged membranes results in thickened sludge with a high dissolved oxygen concentration (approaching saturation), which can be recycled to the main aeration zone rather than to an anoxic or anaerobic zone to optimize biological nutrient removal. Biological nutrient removal was characterized using the International Water Association Activated Sludge Model No. 2d. The stoichiometry of chemical phosphorus removal was also consistent with conventional theory and experience. The characteristics of the solids produced in the MBR were compared with those of a parallel full-scale conventional biological nitrogen removal process and were generally found to be similar. These results provide valuable insight to the design and operating characteristics of MBRs intended to produce effluents with very low nutrient concentrations.     

Part IV: Fitness for Aquatic Systems Long-term Forecast: Key to groundwater protection

Groundwater resources are at risk from pollution, climate change and land-management practices. Long-term forecast is a tool to demonstrate future development and to support decisions on measures which can be implemented, controlled and eventually corrected. As the basis for preventive action, a forecast can be viewed as a key to groundwater protection. The soil zone plays a vital role in groundwater protection. Research on soil and groundwater trends, as affected by change of climate and/or land-management practices, is on the agenda. Integrated research is necessary to develop numerical soil-water system models reflecting all relevant transport processes at various scales. Even relatively simple problems like forecasting pollutant release from contaminated materials are difficult to resolve. Batch tests may be sufficient in low-risk cases. At higher risk when contaminated substrates are chosen for deposition on a large scale, a thorough characterization of the materials is necessary covering all aspects of stability and possible changes of the environment.     

Morphology of grooming limbs in species of Petrolisthes and Pachycheles (Crustacea: Decapoda: Anomura: Porcellanidae): a scanning electron microscopy study

The morphology of the grooming limbs, the 5th pair of pereiopods, was studied by scanning electron microscopy in six species of porcellanid crabs, Petrolisthes cabrilloi, P. cinctipes, P. armatus, P. galathinus, Pachycheles monilifer, and Pachycheles rudis, and their function was inferred by comparison with findings from previous studies. Grooming limb morphology was almost identical among the four Petrolisthes species and differed little compared to that of the two Pachycheles species. The 5th pereiopods bore a basal tuft of mechanoreceptive setae, three different types of grooming setae armed with setules or denticles, two types of smooth sensilla for location and identification of fouling objects, and a terminal, toothed chela for picking firmly attached objects off the gills and body. The grooming limb was extremely flexible and could reach most parts of the body, including the gill chamber on the opposite side. The grooming limb morphology in Petrolisthes cabrilloi is consistent with its wellknown effectiveness in preventing parasitism by the rhizocephalan Lernaeodiscus porcellanae. Grooming setae remove recently attached cyprids, while the chela can grip and remove the much smaller, firmly attached kentrogons. Porcellanid crabs not known to host rhizocephalans, however, had grooming limbs almost identical to those of Petrolisthes cabrilloi despite their previously demonstrated failure to prevent settlement and infestation by L. porcellanae larvae. The effectiveness of P. cabrilloi in removing kentrogons, therefore, seems also to depend on behavioral adaptations whereby this species recognizes the parasite larvae as high-threat objects.