A novel multi-model data-driven ensemble approach for the prediction of particulate matter concentration

Environmental Science and Pollution Research - Accuracy in the prediction of the particulate matter (PM2.5 and PM10) concentration in the atmosphere is essential for both its monitoring and...     

Development of ELISA technique for the analysis of atrazine residues in water

A highly sensitive enzyme immunoassay is described for the detection of atrazine residues in water. Atrazine derivative was conjugated to Bovine Serum Albumin (BSA) to obtain an immunizing antigen and to Horseradish Peroxidase enzyme (POD) to obtain a marker for immunoassay. The formation of these conjugations was confirmed by UV spectroscopy as well as by gel-electrophoresis. Polyclonal antibodies were raised in rabbits by immunization with an atrazine-BSA conjugate containing 29 atrazine residues per BSA molecule. An ELISA on microtitration plates was optimized with peroxidase-atrazine conjugate. The middle of the test (50% B/Bo) was found to be at 90 ng/l, which is well below the maximum concentration permitted by the EC guidelines for drinking water. Detection limits for atrazine of about 1 ng/l could be reached. The assay did not require concentration or cleanup steps for drinking or ground water samples. Validation experiments showed good accuracy and precision. No cross-reactivities were shown by other s-triazines like terbutryn, ametryn, terbuthylazine, des-isopropylatrazine, and de-ethylatrazine except hydroxyatrazine. The latter was present at very low levels that can be calibrated/standardized before analysis or it may be considered as leftover residues of atrazine. Based on these results, it is suggested that this test can be applied to obtain fairly accurate results for atrazine concentration in water samples from different sources.     

Identification of the processes controlling groundwater quality in shallow aquifers of Moradabad city,west Uttar Pradesh,India

Environment, Development and Sustainability - Present study has been carried out to identify the processes controlling groundwater quality of Moradabad city, Uttar Pradesh. A total 188 groundwater...     

Arsenic toxicity in garden cress (Lepidium sativum Linn.): significance of potassium nutrition

In a hydroponic culture, experiments were performed to study the influence of potassium (K) supplementation (0, 20, 40, 60, 80, and 100 mg L^?1) on the arsenic (As; 0, 8, and 10 mg L^?1)-accrued changes in growth traits (plant biomass, root–shoot length) and the contents of lepidine, As and K, in garden cress (Lepidium sativum Linn.) at 10 days after treatment. The changes in these traits were correlated with shoot proline content, protein profile, and the activities of antioxidant enzymes namely superoxide dismutase (SOD, EC 1.15.1.1), catalase (CAT, EC 1.11.1.6), glutathione reductase (GR, EC 1.8.1.7), and ascorbate peroxidase (APX, EC 1.11.1.11). In general, As-alone treatments significantly decreased the growth traits but lead to significant enhancements in shoot proline and enzyme activities. K-supplementation to As-treated L. sativum seedlings decreased shoot-As content, reduced As-induced decreases in growth traits but enhanced the content of shoot proline, and the activities of the studied enzymes maximally with K₁₀₀ + As₈ and As₁₀ mg L^?1. Both 8 and 10 mg L^?1 of As drastically downregulated the shoot proteins ranging from 43–65 kDa. With As₁₀ mg L^?1, there was a total depletion of protein bands below 23 kDa; however, K₈₀ mg L^?1 maximally recovered and upregulated the protein bands. Additionally, protein bands were downregulated (at par with As-alone treatment) above K₈₀ mg L^?1 level. Interestingly, As-stress increased lepidine content in a dose-dependent manner which was further augmented with the K-supplementation. It is suggested that K protects L. sativum against As-toxicity by decreasing its accumulation and strengthening antioxidant defense system and protein stability.     

Microbial contamination of drinking water in Pakistan—a review

Water pollution with pathogenic microorganisms is one of the serious threats to human health, particularly in developing countries. The main objective of this article is to highlight microbial contamination of drinking water, the major factors responsible for microbial contamination, and the resulting health problems in Pakistan. Furthermore, this study will be helpful for researchers and administrative agencies to initiate relevant studies and develop new policies to protect further deterioration of water supply with pathogenic microbes and ensure clean and safe drinking water to the public in Pakistan. In Pakistan, water at the source, in the distribution network, and at the consumer tap is heavily polluted with coliforms and fecal coliforms all over the country. An overview of more than 7,000 water samples reviewed here reveals that an average of over 71 and 58 % samples in the country was contaminated with total coliforms and fecal coliforms, respectively. Drinking water contamination accounts for 20 to 40 % of all diseases in the country, which causes national income losses of Rs 25–58 billion annually (US$0.25–0.58 billion, approximately 0.6–1.44 % of the country’s GDP). Improper disposal of industrial and municipal wastes is the most important factor responsible for water pollution in the country followed by cross-contamination due to old and leaking pipes and lack of water filtration and disinfection facilities. There is an urgent need for emergency steps to stop further deterioration of water quality and improve the existing water quality so as to protect the public from widespread waterborne diseases.     

Selective removal of some polyhydric phenols from aqueous solution by ferric antimonate

Ferric antimonate, a cation-exchanger, has been investigated as an adsorbent for the removal of phenol and polyhydric phenols from aqueous solution. It has been found that ferric antimonate in H+ form selectively adsorbs polyhydric phenols having hydroxyl groups on adjacent positions. While phenol, resorcinol, and quinol did not show any appreciable adsorption, catechol, pyrogallol, and gallic acid having hydroxyl groups on adjacent positions exhibited considerable adsorption on ferric antimonate. Batch equilibrium experiments were carried out to study the effect of contact time, initial concentration of phenolic compounds, and temperature on the adsorption of phenolic compounds on ferric antimonate. The equilibrium time was found to be 1.5 hours for gallic acid and pyrogallol and 2 hours for catechol and salicylic acid. The adsorption data of the phenols at temperatures of 30 degrees, 40 degrees, and 50 degrees C have been described by Langmuir and Freundlich isotherm models. The best fit was obtained with the Langmuir model in the whole range of concentrations studied at all temperatures, indicating a monolayer adsorption onto a homogeneous adsorption surface. On the basis of the Langmuir isotherm, the maximum adsorption capacity of ferric antimonate for gallic acid, pyrogallol, catechol, and salicylic acid was found to be 3.915, 3.734, 2.397, and 2.758 mg/g, respectively at 30 degrees C. The maximum sorption capacity of ferric antimonate for the phenolic compounds studied is in the following order: gallic acid > pyrogallol > salicylic acid > catechol. The adsorption of phenolic compounds was found to decrease with an increase in temperature. Thermodynamic parameters like free energy, enthalpy, and entropy changes were calculated and discussed. The adsorption of polyhydric phenols on ferric antimonate is exothermic and spontaneous in nature.     

Investigation of oxidative stress enzymes and histological alterations in tilapia exposed to chlorpyrifos

Environmental Science and Pollution Research - Chlorpyrifos (ChF) is an organophosphate pesticide that is widely used in agricultural fields and indoor for controlling pests. Aquatic ecosystems are...     

Microwave-Induced Modification of Physical and Functional Characteristics and Antioxidant Potential of Alkali-Soluble Cell Wall Polysaccharides of Nelumbo nucifera Rhizome

Journal of Polymers and the Environment - The alkali-soluble cell wall polysaccharides (CWPs), extracted from Nelumbo nucifera rhizome flour (NNRF), were treated with microwave radiation to modify...     

Trends in the use of Fenton,electro-Fenton and photo-Fenton for the treatment of landfill leachate

Advanced oxidation processes (AOPs) such as Fenton, electro-Fenton and photo-Fenton have been applied effectively to remove refractory organics from landfill leachate. The Fenton reaction is based on the addition of hydrogen peroxide to the wastewater or leachate in the presence of ferrous salt as a catalyst. The use of this technique has proved to be one of the best compromises for landfill leachate treatment because of its environmental and economical advantages. Fenton process has been used successfully to mineralize wide range of organic constituents present in landfill leachate particularly those recalcitrant to biological degradation. The present study reviews the use of Fenton and related processes in terms of their increased application to landfill leachate. The effects of various operating parameters and their optimum ranges for maximum COD and color removal are reviewed with the conclusion that the Fenton and related processes are effective and competitive with other technologies for degradation of both raw and pre-treated landfill leachate.