Rapid measurement of emissions from military aircraft turbine engines by downstream extractive sampling of aircraft on the ground: Results for C-130 and F-15 aircraft

Aircraft emissions affect air quality on scales from local to global. More than 20% of the jet fuel used in the U.S. is consumed by military aircraft, and emissions from this source are facing increasingly stringent environmental regulations, so improved methods for quickly and accurately determining emissions from existing and new engines are needed. This paper reports results of a study to advance the methods used for detailed characterization of military aircraft emissions, and provides emission factors for two aircraft: the F-15 fighter and the C-130 cargo plane. The measurements involved outdoor ground-level sampling downstream behind operational military aircraft. This permits rapid change-out of the aircraft so that engines can be tested quickly on operational aircraft. Measurements were made at throttle settings from idle to afterburner using a simple extractive probe in the dilute exhaust. Emission factors determined using this approach agree very well with those from the traditional method of extractive sampling at the exhaust exit. Emission factors are reported for CO₂, CO, NO, NO_x, and more than 60 hazardous and/or reactive organic gases. Particle size, mass and composition also were measured and are being reported separately. Comparison of the emissions of nine hazardous air pollutants from these two engines with emissions from nine other aircraft engines is discussed.     

Aerosol formation yields from the reaction of catechol with ozone

The formation of secondary organic aerosol from the gas-phase reaction of catechol (1,2-dihydroxybenzene) with ozone has been studied in two smog chambers. Aerosol production was monitored using a scanning mobility particle sizer and loss of the precursor was determined by gas chromatography and infrared spectroscopy, whilst ozone concentrations were measured using a UV photometric analyzer. The overall organic aerosol yield (Y) was determined as the ratio of the suspended aerosol mass corrected for wall losses (M_o) to the total reacted catechol concentrations, assuming a particle density of 1.4 g cm^?3. Analysis of the data clearly shows that Y is a strong function of M_o and that secondary organic aerosol formation can be expressed by a one-product gas–particle partitioning absorption model. The aerosol formation is affected by the initial catechol concentration, which leads to aerosol yields ranging from 17% to 86%. The results of this work are compared to similar studies reported in the literature.     

Investigations of an intense aerosol loading during 2007 cyclone SIDR – A study using satellite data and ground measurements over Indian region

Tropical cyclones are prominent weather systems characterized by high atmospheric pressure gradients and wind speeds. Intense tropical cyclones occur in India during the pre-monsoon (spring), early monsoon (early summer), or post-monsoon (fall) periods. Originating in both the Bay of Bengal (BoB) and the Arabian Sea (AS), these tropical cyclones often attain velocities of more than 100 km h^?1 and are notorious for causing intense rain and storm surge as they cross the Indian coast. In this study, we examine the changes in the aerosol properties associated with an intense tropical cyclone “SIDR”, that occurred during 11–16 November 2007 over BoB. This cyclone, accompanied with very strong surface winds reaching 223 km h^?1, caused extensive damage over Bangladesh. Ground-based measurements of Aerosol Optical Depth (AOD) in the neighboring urban environment of Hyderabad, India, showed significant variations due to changes in wind velocity and direction associated with the cyclone passage. The Terra-MODIS and AVHRR satellite images showed prevalence of dust particles mixed with emissions from anthropogenic sources and biomass-burning AS, while the aerosol loading over BoB was significantly lower. The positive values of Aerosol index (AI) obtained from the Ozone Monitoring Instrument (OMI) suggested the presence of an elevated aerosol layer over the West coast of India, AS and Thar Desert during and after the cyclone episode. Meteorological parameters from the MM5 mesoscale model were used to study the variations in winds associated with the cyclonic activity. Particulate matter loading over the region during the cyclone period increased by ～45% with an accompanying decrease in columnar aerosol optical depth. The variations in Angstrom parameters suggested coarse-mode particle loading due to dust aerosols as observed in satellite data.     

Evaluation of the aggressive potential of marine chloride and sulfate salts on mortars applied as renders in the Metropolitan Region of Salvador--Bahia, Brazil

In recent years, growing interest has focused on determining the performance of materials and evaluating the service life of structures exposed to various environmental forces. In this context, the determination of the aggressive potential of marine salts on mortars used as external renders is critical. The present study aimed to evaluate the spatial distribution of marine salts relative to distance from the sea. This was done by monitoring the deposition rate of chlorides and sulfates in wet candle sensors, located at nine stations scattered around the Metropolitan Region of Salvador, state of Bahia, Brazil. The study also determined the effectiveness of water-soluble salts at penetrating three different types of mortars of varying cement content via deposition and diffusion. The methodology employed enabled an evaluation of the efficiency of the monitoring sensors' measurement of the aggressiveness potential of local marine aerosol, and determination of the comparative performance of the three mortars tested, from the standpoint of resistance to salt penetration. The type and amount of salts captured both in solution and in powder samples extracted from the mortars were determined by ion chromatography. The analysis of the various types of mortars tested indicated which types are more resistant to the aggressive potential of the region's marine aerosol and the distance from the shore where local buildings are liable to be most strongly affected.     

The reliability of experts' opinions in constructing a composite environmental index: The case of ESI 2005

The complexity of the environment demands a well-constructed composite environmental index (CEI) to provide a useful tool to draw attention to environmental conditions and trends for policy purposes. Among the common difficulties in constructing a proper CEI are uncertainties due to the selection of the most representative underlying variables or indicators. A degree of uncertainty accompanies experts' judgments, and to deal with vague, subjective or inconsistent information, logic other than classic is required. This study analyzes a procedure that uses different experts' opinions in constructing a CEI, with the use of paraconsistent annotated logic. For this, a sensitivity analysis of the Environmental Sustainability Index (ESI 2005) was used as an example to assess the reliability of experts' opinions. The uncertainty due to the disagreement in experts' opinions clearly indicates that the forms we presently use to measure and monitor the actual environment are insufficient, that is, there is a lack of a “science of sustainability”.     

Deposition rates of unattached and attached radon progeny in room with turbulent airflow and ventilation

In this paper deposition rate coefficients for unattached and attached radon progeny were estimated according to a particle deposition model for turbulent indoor airflow described by Zhao and Wu [2006. Modeling particle deposition from fully developed turbulent flow in ventilation duct. Atmos. Environ. 40, 457–466]. The parameter which characterizes turbulent indoor airflow in this model is friction velocity, u*. Indoor ventilation changes indoor airflow and friction velocity and influences deposition rate coefficients. Correlation between deposition and ventilation rate coefficients in the room was determined. It was shown that deposition rate coefficient increases with ventilation rate coefficient and that these parameters of the Jacobi room model cannot be assumed to be independent. The values of deposition rate coefficients were presented as functions of friction velocity and ventilation rate coefficient. If ventilation rate coefficient varies from 0.1 up to 1 h⁻¹, deposition rate coefficients for unattached and attached fractions were estimated to be in the range 3–110 h⁻¹ and 0.015–0.35 h⁻¹, respectively.     

A review and test of predictive models for the bioaccumulation of radiostrontium in fish

Empirical relations between the ⁹⁰Sr concentration factor (CF) and the calcium concentration in freshwater aquatic systems have previously been determined in studies based on data obtained prior to the Chernobyl accident. The purpose of the present research is to review and compare these models, and to test them against a database of post-Chernobyl measurements from rivers and lakes in Ukraine, Russia, Belarus and Finland. It was found that two independently developed models, based on pre-Chernobyl empirical data, are in close agreement with each other, and with empirical data. Testing of both models against new data obtained after the Chernobyl accident confirms the models’ predictive ability. An investigation of the influence of fish size on ⁹⁰Sr accumulation showed no significant relationship, though the data set was somewhat limited.     

Sorption of alkylphenols on Ebro River sediments: comparing isotherms with field observations in river water and sediments

This study reports sorption isotherms of the endocrine disruptors nonylphenol (NP) and octylphenol (OP) in three sediment samples from the Ebro River basin (NE Spain), with organic carbon fractions (f_OC) ranging from 0.0035 to 0.082 g_OC g⁻¹. All isotherms were fitted to the Freundlich model with slightly nonlinear exponents ranging from 0.80 to 0.94. The solubility of the compounds as well as the organic carbon (OC) content had the strongest influences on the sorption behavior of these compounds. Comparison of the laboratory-spiked samples with the native contamination of NP of 45 water and concurrent sediment samples resulted in reasonable matches between both data sets, even though the lowest concentrations in the field were not completely reached in laboratory tests. This good agreement indicates that sorption laboratory data can be extrapolated to environmental levels and therefore the distribution of nonylphenol between sediments and water can be predicted with a precision of one order of magnitude. Furthermore, laboratory experiments with simultaneous loading of NP and OP revealed negligible competition for sorption sites at low concentrations.     

Sediment integrative assessment of the Bay of Cádiz (Spain): An ecotoxicological and chemical approach

This study consisted of the sediment toxicity assessment of the Bay of Cádiz based on two endpoints: growth inhibition for Cylindrotheca closterium (benthic microalgae) and fecundity inhibition for Tisbe battagliai (harpacticoid copepod). A new methodology to eliminate (but not as storage technique) the autochthonous biota present in the sediment samples by immersing them in liquid nitrogen (? 196 °C) was also assessed. Sediment toxicity data showed different toxicity levels for both organisms. In general, T. battagliai was more sensitive; however a good correlation (r = 0.75; p  < 0.05) between sediment toxicity results for both species was found. Data in pore water (pH, redox potential, and toxicity for microalgae and copepod) and sediment (pH, redox potential, organic carbon, and metal concentrations) demonstrated that ultra-freezing did not alter sample characteristics; thus, this technique can be adopted as a pre-treatment in whole-sediment toxicity tests in order to avoid misleading results due to presence of autochthonous biota. Multivariate statistical analysis such as cluster and principal component analysis using chemical and ecotoxicological data were employed. Silt and organic matter percentage and lead concentration were found to be the factors that explain about 77% of sediment toxicity in the Bay of Cádiz. Assay methodology determined in this study for both assayed species is considered adequate to be used in sediment toxicity monitoring programs. Results obtained using both species show that the Bay of Cádiz can be considered a moderately polluted zone.     

Vertical distribution of anthropogenic radionuclides in cores from contaminated floodplains of the Yenisey River

The Mining and Chemical Industrial Combine, Zheleznogorsk (MCIC, previously known as Krasnoyarsk-26) on the River Yenisey has contaminated the surrounding environment with anthropogenic radionuclides as a result of discharges of radioactive wastes. The purpose of this study was to investigate the vertical distribution of anthropogenic contamination (¹³⁷Cs and plutonium) within floodplain areas at different distances from the discharge point. Sites were chosen that display different characteristics with respect to periodic inundation with river water. Cs-137 activity concentrations were in the range 23–3770 Bq/kg (dry weight, d.w.); Pu-239,240 activity concentrations were in the range <0.01–14.2 Bq/kg (d.w.). Numerous sample cores exhibited sub-surface maxima which may be related to the historical discharges from the MCIC. Possible evidence indicating the deposition of earlier discharges at MCIC in deeper core layers was observed in the ²³⁸Pu:^239,240Pu activity ratio data: a Pu signal discernible from global fallout could be observed in numerous samples. Cs-137 and Pu-239,240 activity concentrations were correlated with the silt fraction (% by mass <63 μm) though no significant correlation was observed between (grain-size) normalised ¹³⁷Cs activity concentrations and distance downstream from the MCIC.