Selection and application of a rainbow trout toxicity testing procedure for screening Sacramento River Watershed, California samples

A number of procedures have been developed to assess toxic effects on the early life stages of salmonid fish. In this study 13 rainbow trout embryo development relatively short-term (7 to 90 day) procedures were reviewed. Three 7-day methods from the published literature and three modifications developed at AQUA-Science (A-S) were evaluated in the laboratory. Based on that evaluation, A-S methods were selected for screening surface water samples (A-S 1) collected in the Sacramento River watershed (California) and for conducting toxicity identification evaluations (TIE) to identify cause(s) of toxicity. Test control performance, test sensitivity, and reference toxicant response variability in the A-S 1 were superior to those in commonly used freshwater toxicity testing methods. The incidence of Sacramento River watershed samples resulting in a notable decrease in embryo development was very low. Of 260 samples screened only 16 (6%) resulted in statistically significant inhibition of embryo development. Of the 16 toxic samples, nine caused minimal (less than 20% abnormal development) and four marginal (less than 30%) toxicity. Samples collected from the agriculture-dominated Colusa Basin Drain and rangeland/forest-dominated Battle Creek on June 16, 2005 caused significant toxicity. TIE procedures indicated that cationic chemicals were the primary cause of toxicity. Metals analysis did not reveal concentrations sufficient to inhibit embryo development, so the most probable cause of toxicity in the two samples was cationic chemicals (perhaps surfactants?) or metals that were not included in the analytical screening.     

What do qualitative rapid assessment collections of macroinvertebrates represent? A comparison with extensive quantitative sampling

It is a fundamental tenet of Rapid Biological Assessments (RBA) that the samples collected reflect the community from which they are drawn. As with any biological sampling, RBA collections are subject to sampling error resulting in the omission of some taxa. The aim of this study is to compare the composition of RBA samples with an estimate of community structure based on extensive quantitative sampling. We used logistic regression to explore the relationships between the frequency of a taxon being collected in an RBA sample and its biological and ecological traits, namely its abundance, distribution, body size and habit. RBA samples and quantitative estimates of community structure were made in riffles in the Kangaroo and Nepean Rivers, New South Wales, Australia. Single RBA samples may collect up to 63% of the taxa that are collected by extensive quantitative sampling at a site. The frequency of a taxon being recorded in an RBA sample was significantly and positively related to all traits tested indicating a bias in the collection methods towards large, abundant and widely distributed taxa. Accordingly, taxa missed by RBA sampling were generally small, narrowly distributed or rare. These findings enhance our understanding of what RBA samples represent, and the bias and source of errors associated with RBA sampling. This study also quantifies the utility of RBA methods for biodiversity assessment.     

Identification of air pollutant sampling period using horizontal dilution potential

A new model is proposed for estimating horizontal dilution potential of an area using wind data. The mean wind speed and wind direction variation are used as a measure of linear and angular spread of pollutant in the atmosphere. The methodology is applied to monitored hourly wind data for each month of 1 year for wind data collected at Vadodara, Gujarat and monthly dilution potential is estimated. It is found that there is a gradual variation of horizontal dilution potential over a year with limited dilution during post monsoon period i.e., October and November and a high dilution in pre monsoon period i.e., May and June. This information can be used to design air quality sampling network and duration of sampling for source apportionment study. Air pollutant sampling during high dilution period can be carried out for identifying urban and rural dust and wind blown dust from mining activity. Air pollutant sampling during low dilution period can be carried out for capturing large amount of particulate matter from anthropogenic sources like elevated stack of furnace.     

Risk assessment and distribution of soil Pb in Guangdong, China

In this study, the spatial distributions of soil lead (Pb) concentration in three horizontal soils in Guangdong, China, were surveyed and analyzed using geostatistics and geography information systems (GIS). Findings indicated that the Pb geometric mean concentration of 23.3 mg/kg in surface soils was found to be higher than those in global soils, which ranged from 2.3–235 mg/kg. In addition, the Pb geometric mean concentrations from A- to C-horizon were found to be 23.3, 27.2, and 28.6 mg/kg, respectively. The classification of a soil Pb environmental risk in an area was likewise presented based on the different levels of environmental quality of Pb and was done by GIS technology. Accordingly, there is a higher local concentration of Pb in the surrounding areas of Guangzhou where there is higher population density and in the north of Guangdong, which is a historic mining area. The results obtained by the environmental risk assessment reveal that about 46% of total surveyed area was above the background value, that is, 2.7% of the total area was at risk of pollution.     

Contaminants in fish tissue from US lakes and reservoirs: a national probabilistic study

An unequal probability design was used to develop national estimates for 268 persistent, bioaccumulative, and toxic chemicals in fish tissue from lakes and reservoirs of the conterminous United States (excluding the Laurentian Great Lakes and Great Salt Lake). Predator (fillet) and bottom-dweller (whole body) composites were collected from 500 lakes selected randomly from the target population of 147,343 lakes in the lower 48 states. Each of these composite types comprised nationally representative samples whose results were extrapolated to the sampled population of an estimated 76,559 lakes for predators and 46,190 lakes for bottom dwellers. Mercury and PCBs were detected in all fish samples. Dioxins and furans were detected in 81% and 99% of predator and bottom-dweller samples, respectively. Cumulative frequency distributions showed that mercury concentrations exceeded the EPA 300 ppb mercury fish tissue criterion at nearly half of the lakes in the sampled population. Total PCB concentrations exceeded a 12 ppb human health risk-based consumption limit at nearly 17% of lakes, and dioxins and furans exceeded a 0.15 ppt (toxic equivalent or TEQ) risk-based threshold at nearly 8% of lakes in the sampled population. In contrast, 43 target chemicals were not detected in any samples. No detections were reported for nine organophosphate pesticides, one PCB congener, 16 polycyclic aromatic hydrocarbons, or 17 other semivolatile organic chemicals.     

Assessing benthic community condition in Chesapeake Bay: does the use of different benthic indices matter?

Federal and state environmental agencies conduct several programs to characterize the environmental condition of Chesapeake Bay. These programs use different benthic indices and survey designs, and have produced assessments that differ in the estimate of the extent of benthic community degradation in Chesapeake Bay. Provided that the survey designs are unbiased, differences may exist in the ability of these indices to identify environmental degradation. In this study we compared the results of three indices calculated on the same data, and the assessments of two programs: the Chesapeake Bay Program and the Mid-Atlantic Integrated Assessment (MAIA). We examined the level of agreement of index results using site-based measures of agreement, evaluated sampling designs and statistical estimation methods, and tested for significant differences in assessments. Comparison of ratings of individual sites was done within separate categories of water and sediment quality to identify which indices summarize best pollution problems in Chesapeake Bay. The use of different benthic indices by these programs produced assessments that differed significantly in the estimate of degradation. A larger fraction of poor sites was classified as good by the Environmental Monitoring and Assessment Program’s Virginian Province and MAIA benthic indices compared to the Chesapeake Bay benthic index of biotic integrity, although overall classification efficiencies were similar for all indices. Differences in survey design also contributed to differences in assessments. The relative difference between the indices remained the same when they were applied to an independent dataset, suggesting that the indices can be calibrated to produce consistent results.     

IFTCIP: An Integrated Optimization Model for Environmental Management under Uncertainty

In this study, an interval-fuzzy two-stage chance-constrained integer programming (IFTCIP) method is developed for supporting environmental management under uncertainty. The IFTCIP improves upon the existing interval, fuzzy, and two-stage programming approaches by allowing uncertainties expressed as probability distributions, fuzzy sets, and discrete intervals to be directly incorporated within a general mixed integer linear programming framework. It has advantages in uncertainty reflection, policy investigation, risk assessment, and capacity-expansion analysis in comparison to the other optimization methods. Moreover, it can help examine the risk of violating system constraints and the associated consequences. The developed method is applied to the planning for facility expansion and waste-flow allocation within a municipal solid waste management system. Violations of capacity constraints are allowed under a range of significance levels, which reflects tradeoffs between the system cost and the constraint-violation risk. The results indicate that reasonable solutions for both binary and continuous variables have been generated under different risk levels. They are useful for generating desired decision alternatives with minimized system cost and constraint-violation risk under various environmental, economic, and system-reliability conditions. Generally, willingness to take a higher risk of constraint violation will guarantee a lower system cost; a strong desire to acquire a lower risk will run into a higher system cost.     

Modelling Water Blending—Sensitivity of Optimal Policies

Water blending is modelled as a combination of a linear program and a stochastic dynamic program. Optimal policies are found for linear and integer-linear formulations using both an expected monetary value and conditional value-at-risk criterion. The sensitivity of these solutions to the discretisation over volume and over time is investigated.     

The seasonal status of chemical parameters in shallow coastal aquifers of Rameswaram Island, India

The study area Rameswaram, a holy island, is famous for the sacred Ramanathaswamy temple, which cements people of the country regardless of their place, residence, or their religion or creed. This coastal tract is experiencing a chronic fresh water shortage, despite a few spring sources. The study area is selected for the characterization of physico-chemical parameters viz., pH, EC, TDS, salinity, TA, TH, CH, MH, chloride, and fluoride for 150 groundwater samples and the impact of pre- and post-monsoons on the groundwater quality is studied. The water quality index advocates the transfer of groundwater quality from unacceptable status in the pre-monsoon into an acceptable status in the post-monsoon. The Langelier saturation index reflects the scaling tendency of groundwater in the study area. The Karl Pearson correlation matrix has approved the maximum influence of calcium and chloride on the total dissolved solids. It is interesting to conclude that the groundwater in the study area has very had nature, especially of non-carbonate type.     

A storm event-based approach to TMDL development

It is vitally important to define the critical condition for a receiving water body in the total maximum daily load (TMDL) development process. One of the major disadvantages of using a continuous simulation approach is that there is no guarantee that the most critical condition will be covered within the subjectively selected representative hydrologic period, which is usually several years depending on the availability of data. Another limitation of the continuous simulation approach, compared to a design storm approach, is the lack of an estimate of the risk involved. Because of the above limitations, a storm event-based critical flow-storm (CFS) approach was previously developed to explicitly address the critical condition as a combination of a prescribed stream flow and a storm event of certain magnitude, both having a certain frequency of occurrence and when combined, would create a critical condition. The CFS approach was tested successfully in a TMDL study for Muddy Creek in Virginia. The present paper reports results of a comparative study on the applicability of the CFS approach in Taiwan. The Dy-yu creek watershed in northern Taiwan differs significantly from Muddy Creek in terms of climate, hydrology, terrain, and other characteristics. Results show that the critical condition for different watersheds might be also different, and that the CFS approach could clearly define that critical condition and should be considered as an alternative method for TMDL development to a continuous simulation approach.