On monitoring anthropogenic airborne uranium concentrations and (235)U/(238)U isotopic ratio by Lichen - bio-indicator technique

Lichens are widely used to assess the atmospheric pollution by heavy metals and radionuclides. However, few studies are available in publications on using lichens to qualitatively assess the atmospheric pollution levels. The paper presents research results applying epiphytic lichens as bio-monitors of quantitative atmospheric contamination with uranium. The observations were conducted during 2.5 years in the natural environment. Two experimental sites were used: one in the vicinity of a uranium contamination source, the other one - at a sufficient distance away to represent the background conditions. Air and lichens were sampled at both sites monthly. Epiphytic lichens Hypogimnia physodes were used as bio-indicators. Lichen samples were taken from various trees at about 1.5m from the ground. Air was sampled with filters at sampling stations. The uranium content in lichen and air samples as well as isotopic mass ratios (235)U/(238)U were measured by mass-spectrometer technique after uranium pre-extraction. Measured content of uranium were 1.45 mgkg(-1) in lichen at 2.09 E-04 microgm(-3) in air and 0.106 mgkg(-1) in lichen at 1.13 E-05 microgm(-3) in air. The relationship of the uranium content in atmosphere and that in lichens was determined, C(AIR)=exp(1.1 x C(LICHEN)-12). The possibility of separate identification of natural and man-made uranium in lichens was demonstrated in principle.     

Deposition rates of unattached and attached radon progeny in room with turbulent airflow and ventilation

In this paper deposition rate coefficients for unattached and attached radon progeny were estimated according to a particle deposition model for turbulent indoor airflow described by Zhao and Wu [2006. Modeling particle deposition from fully developed turbulent flow in ventilation duct. Atmos. Environ. 40, 457–466]. The parameter which characterizes turbulent indoor airflow in this model is friction velocity, u*. Indoor ventilation changes indoor airflow and friction velocity and influences deposition rate coefficients. Correlation between deposition and ventilation rate coefficients in the room was determined. It was shown that deposition rate coefficient increases with ventilation rate coefficient and that these parameters of the Jacobi room model cannot be assumed to be independent. The values of deposition rate coefficients were presented as functions of friction velocity and ventilation rate coefficient. If ventilation rate coefficient varies from 0.1 up to 1 h⁻¹, deposition rate coefficients for unattached and attached fractions were estimated to be in the range 3–110 h⁻¹ and 0.015–0.35 h⁻¹, respectively.     

Improving dialogue among researchers,local and indigenous peoples and decision-makers to address issues of climate change in the North

Ambio - The Circumpolar North has been changing rapidly within the last decades, and the socioeconomic systems of the Eurasian Arctic and Siberia in particular have displayed the most dramatic...     

Comparison of particulate mass, chemical species for urban, suburban and rural areas in central Taiwan, Taichung

Aerosol samples for PM2.5, PM(2.5-10) and TSP were collected from June to September 1998 and from February to March 1999 in central Taiwan. Ion chromatography was used to analyze the acidic anions: sulfate, nitrate and chloride in the Universal samples. The ratios of fine particle concentrations to coarse particle concentrations displayed that the fine particle concentrations are almost greater than that of coarse particle concentrations in Taichung area. The average concentrations of PM2.5, PM(2.5-10) and TSP in urban sites are higher than in suburban and rural sites at both daytime and night-time. Chloride dominated in the coarse mode in daytime and in fine mode in night-time. Nitrate can be found in both the coarse and fine modes. Sulfate dominated in fine mode in both daytime and night-time.     

Suitability of process-based tree growth models for addressing tree response to climate change

Empirical models of tree growth have been used for many years to predict timber yields and other properties of trees. However, such models rely on measured relationships between tree growth and historic environmental conditions. As anthropogenic actions alter the environment, especially atmospheric composition, empirical models become less reliable and process-based models become more useful. Process-based models are challenged to simulate growth of structurally and physiologically complex organisms using explicit mathematical expressions to capture growth response to environmental conditions. In this review we summarize the physiological requirements of process-based models and examine the capabilities of six published models (CARBON, ECOPHYS, PGSM, TREE-BGC, TREGRO, W91) for simulating tree response to changes in environmental conditions (elevated temperature, increased CO(2) concentration, and enhanced concentrations of tropospheric ozone). These analyses indicate that current models are reliable integrators of environmental effects on individual processes (e.g. photosynthesis), but may be less reliable where physiological acclimation occurs or when extrapolated to growth of specific tree compartments.     

Dynamics of radionuclide concentrations in calcified tissues of reindeer in the western Russian Arctic

The specific activities of artificial and natural nuclides were determined in bone and teeth of reindeer that had lived before, during, and after nuclear tests on the Archipelago Novaya Zemlya and of reindeer from the nearby mainland region. In bone of reindeer from Novaya Zemlya, 90Sr and 210Pb are the main source of beta-activity, the 210Po is the main source of the alpha activity. In bone of reindeer that lived on Novaya Zemlya during underground tests, the 90Sr activity was relatively high (0.75 +/- 0.20 Bq/g dry weight). In animals that lived after the tests were banned, the level was significantly lower (0.44 +/- 0.17 Bq/g) and did not differ from the level of the 90Sr activity found in the mainland reindeer bone. On Novaya Zemlya, the concentrations of the natural 210Pb in bone of the recent reindeer (0.57 +/- 0.19 Bq/g) is similar to that which was in the teeth of reindeer a hundred years ago (0.65-0.75 Bq/g) and significantly higher than in the recent mainland reindeer from different regions (0.18-0.17 Bq/g).     

Heavy metal pollution in sediments of the Pasvik River drainage

The purpose of this paper is to study the regional impacts of heavy metals (Ni, Cu, Co, Zn, Cd, Pb, Hg) on the watershed of the Pasvik River. On the basis of sediment investigations at 27 stations of the watershed, background concentrations of the heavy metals, vertical distribution of heavy metals in sediments, heavy metal concentrations in surface sediments, contamination degree, and risk index were determined. The atmospheric emissions of Ni, Cu, Co, Zn, Cd and Hg from the smelters and waste waters from tailing dams and mines of the Pechenganickel Company are likely to be the main sources of increasing concentrations observed in recent sediments of the lower river reaches. Lead showed a different pattern from the other heavy metals--increasing Pb concentrations in the upper sediment layers towards the Norwegian side.     

Accumulation pattern and biotransformation enzyme induction in rainbow trout embryos exposed to sublethal aqueous concentrations of 3,3',4,4'-tetrachlorobiphenyl

Accumulation pattern of 3,3',4,4'-tetrachlorobiphenyl (PCB 77) and the exposure time needed to activate the monooxygenase (EROD) and conjugation (GST) enzyme systems of fish at the advanced embryonic stage were studied. Eyed stage embryos of rainbow trout (Oncorhynchus mykiss) were exposed to sublethal doses (0, 1, 10, and 100 micrograms/l) of PCB 77. Results indicated direct accumulation of the chemical into the eggs, but the exposure time was not long enough for PCB 77 to reach constant steady state. However, at the two lowest test concentrations (1 microgram/l and 10 micrograms/l) a temporary plateau at chemical accumulation was reached at the third exposure day (185 and 1221 ng PCB/g egg w.w). At the highest concentration (100 micrograms/l) the decrease in the accumulation rate was already evident after the first day (2182 ng PCB/g egg w.w). The chemical uptake increased again at day 7 in all the exposure groups. That event could have been caused by the increased metabolic rate of the embryos in preparation for the upcoming hatching event. The microsomal CYP1A monooxygenase system (EROD) was shown to be a sensitive indicator of embryonic exposure, being induced at the low (1 microgram/l, 182 ng/g egg) PCB concentration and after a short (3 day) exposure time. The conjugation enzyme system (GST) was shown to be functioning already at the advanced embryonic stage, although no response to the studied chemical stress was detected.     

Innovative aspects of environmental chemistry and technology regarding air,water, and soil pollution

Environmental Science and Pollution Research -     

Heavy metal pollution and forest health in the Ukrainian Carpathians

The Ukrainian Carpathians are characterized by high air pollution caused by emissions from numerous industries. We have been monitoring the state of forests in this region since 1989. The highest levels of tree defoliation (>30%) are found close to industrial emission sources and in the upper mountain forests of the Ivano-Frankivsk and Chernivtsi regions. This is caused by a combination of strong anthropogenic influences (pollution, illegal uses, recreation) as well as poor site and climatic conditions. In the Ivano-Frankivsk region, Cd and Mo accumulate in forest soils; Cr, Mo and Zn soil concentrations are higher than their limit levels; and Pb concentrations exceed toxic levels close to industrial areas (10% of the region territory). Local background levels of heavy metals are greatly exceeded in snow close to industrial regions. Analysis of correlation matrices shows that the chemical elements Ba, Cd, Co, Cr, Cu, Mo, Ni, Pb, V and Zn occur at pollution levels in natural ecosystems in the Ukrainian Carpathians. Maximum concentrations of toxic elements occur in the oak forest zone; the most industrially developed area of the region. Toxic heavy metals in the Ukrainian Carpathians forests enter with precipitation and dustfall, then become fixed in soil and accumulate in leaves, needles of vascular plants and mosses. Concentrations of these metals decrease with altitude: highest in the oak forests, less in beech, and lowest in the spruce forest zones. However, some chemical elements have the highest concentrations in spruce forests; V in needles, As in snow, and Ba and Al in soils.