A multi-approach monitoring of particulate matter, metals and PAHs in an urban street canyon

For the first time until now, the results from a prediction model (Atmospheric Dispersion Modelling System (ADMS)-Road) of pollutant dispersion in a street canyon were compared to the results obtained from biomonitors. In particular, the instrumental monitoring of particulate matter (PM10) and the biomonitoring of 14 polycyclic aromatic hydrocarbons (PAHs) and 11 metals by Quercus ilex leaves and Hypnum cupressiforme moss bags, acting as long- and short-term accumulators, respectively, were carried out. For both PAHs and metals, similar bioaccumulation trends were observed, with higher concentrations in biomonitors exposed at the leeward canyon side, affected by primary air vortex. The major pollutant accumulation at the leeward side was also predicted by the ADMS-Road model, on the basis of the prevailing wind direction that determines different exposure of the street canyon sides to pollutants emitted by vehicular traffic. A clear vertical (3, 6 and 9 m) distribution gradient of pollutants was not observed, so that both the model and biomonitoring results suggested that local air turbulences in the street canyon could contribute to uniform pollutant distribution at different heights.     

Kinetics of monomer biodegradation in soil

In modern intensive agriculture, plastics are used in several applications (i.e. mulch films, drip irrigation tubes, string, clips, pots, etc.). Interest towards applying biodegradable plastics to replace the conventional plastics is promising. Ten monomers, which can be applied in the synthesis of potentially biodegradable polyesters, were tested according to ASTM 5988-96 (standard respirometric test to evaluate aerobic biodegradation in soil by measuring the carbon dioxide evolution): adipic acid, azelaic acid, 1,4-butanediol, 1,2-ethanediol, 1,6-hexanediol, lactic acid, glucose, sebacic acid, succinic acid and terephthalic acid. Eight replicates were carried out for each monomer for 27-45 days. The numerical code AQUASIM was applied to process the CO? experimental data in order to estimate values for the parameters describing the different mechanisms occurring to the monomers in soil: i) the first order solubilization kinetic constant, K(sol) (d?1); ii) the first order biodegradation kinetic constant, K(b) (d?1); iii) the lag time in biodegradation, t(lag) (d); and iv) the carbon fraction biodegraded but not transformed into CO?, Y (-). The following range of values were obtained: [0.006 d?1, 6.9 d?1] for K(sol), [0.1 d?1, 1.2 d?1] for K(b), and [0.32-0.58] for Y; t(lag) was observed for azelaic acid, 1,2-ethanediol, and terephthalic acid, with estimated values between 3.0 e 4.9 d.     

Landfill leachate enhances fermentative hydrogen production from glucose and sugarcane processing derivatives

Fermentation can use renewable raw materials as substrate, which makes it a sustainable method to obtain H₂. This study evaluates H₂ production by a mixed culture from substrates such as glucose and derivatives from sugarcane processing (sucrose, molasses, and vinasse) combined with landfill leachate. The leachate alone was not a suitable substrate for biohydrogen production. However, leachate blended with glucose, sucrose, molasses, or vinasse increased the H₂ production rate by 2.0-, 2.8-, 4.6-, and 0.5-fold, respectively, as compared with the substrates without the leachate. Determination of metals (Cu, Cd, Pb, Hg, Ni, and Fe) at the beginning and at the end of the fermentative assays showed how they were consumed during the fermentation and demonstrated improved H₂ production. During fermentation, Cu, Fe, and Cd were the most consumed leachate metals. The best substrate combination to produce H₂ was molasses and leachate, which gave high volumetric productivity—469 ml H₂/l h. However, addition of the leachate to the substrates stimulated lactic acid formation pathways, which lowered the H₂ yield. The use of leachate combined with sugarcane processing derivatives as substrates could add value to the leachate and reduce its polluting power, generating a clean energy source from renewable raw materials.     

Environmental and biological monitoring of benzene in traffic policemen, police drivers and rural outdoor male workers

To evaluate exposure to benzene in urban and rural areas, an investigation into personal exposure to benzene in traffic policemen, police drivers and rural (roadmen) male outdoor workers was carried out. Personal samples and data acquired using fixed monitoring stations located in different areas of the city were used to measure personal exposure to benzene in 62 non-smoker traffic policemen, 22 police drivers and 57 roadmen. Blood benzene, urinary trans-trans muconic acid (t,t-MA) and S-phenyl-mercapturic acid (S-PMA) were measured at the end of work shift in 62 non-smoker traffic policemen, 22 police drivers and 57 roadmen and 34 smoker traffic policemen, 21 police drivers and 53 roadmen. Exposure to benzene was similar among non-smoker traffic policemen and police drivers and higher among non-smoker urban workers compared to rural workers. Blood benzene, t,t-MA and S-PMA were similar among non-smoker traffic policemen and police drivers; blood benzene and t,t-MA were significantly higher in non-smoker urban workers compared to rural workers. Significant increases in t,t-MA were found in smokers vs. non-smokers. In non-smoker urban workers airborne benzene and blood benzene, and t,t-MA and S-PMA were significantly correlated. This study gives an evaluation of the exposure to benzene in an urban area, comparing people working in the street or in cars, to people working in a rural area. Benzene is a certain carcinogen for humans. The results we showed should lead to more in-depth studies about the effects on health of these categories of workers.     

Soil subsampling in environmental sciences: the role of granulometry

Uncertainty associated to analytical results is an issue of major interest for the whole analytical community. A large effort has been made to improve analytical techniques and procedures aimed to achieve a well characterized uncertainty associated with analysis. However, it is becoming increasingly recognised that uncertainty deriving from sampling and subsampling can even dominate the global uncertainty budget. A study on subsampling activities on different soil typologies has been performed by granulometry determinations. The differences between sieving methodologies based on both wet and dry mode have been studied. Subsampling is approached by replicated measurements providing a quantitative assessment of the distribution heterogeneity, a suitable method validation scheme and an empirical determination of uncertainty.     

Cellular localisation of secondary metabolites isolated from the Caribbean sponge <Emphasis Type="Italic">Plakortis simplex</Emphasis>

The Caribbean sponge, Plakortis simplex, is known to contain a large array of secondary metabolites, including the antimalarial polyketide plakortin, several unusual glycolipids, and some hopanoids, which closely resemble typical bacterial metabolites. The hypothesis that they could be products of bacterial metabolism was tested by localizing specific metabolites in cells using physical separation of sponge cells, bacterial symbionts and supernatant by differential centrifugation. The obtained fractions were analysed separately for the typical P. simplex metabolites by NMR and mass spectrometry, and most of them were shown to be present in the bacterial cells but not in the sponge cells. In addition, PCR screening showed that the biosynthetic pathway for glycosphingolipids was present in the bacterial cells. Isolation of a Sphingomonas strain PS193 from P. simplex and subsequent glycosphingolipid analysis resulted in the detection of a known glycosphingolipid, GSL-1, that did, however, not match the glycosphingolipid profile of P. simplex. Therefore, it is unlikely that Sphingomonas strain PS193 is an abundant member of the microbial community associated with P. simplex. Other glycosphingolipid producing bacteria in P. simplex remain to be identified. In conclusion, this study provides experimental evidence that the glycolipids and hopanoids and possibly also the polyketide plakortin are produced by microbial symbionts rather than the sponge from which the metabolites were originally isolated.     

Accumulation and Depuration Kinetics of Rotavirus in Mussels Experimentally Contaminated

Bivalve mollusks as filter-feeders concentrate in their digestive tissue microorganisms likely present in the harvesting water, thus becoming risky food especially if consumed raw or poorly cooked. To eliminate bacteria and viruses eventually accumulated, they must undergo a depuration process which efficacy on viruses is on debate. To better clarify the worth of the depuration process on virus elimination from mussels, in this study we investigated rotavirus kinetics of accumulation and depuration in Mytilus galloprovincialis experimentally contaminated. Depuration process was monitored for 9 days and virus residual presence and infectivity were evaluated by real time quantitative polymerase chain reaction, cell culture and electron microscopy at days 1, 2, 3, 5, 7, 9 of depuration. Variables like presence of ozone and of microalgae feeding were also analyzed as possible depuration enhancers. Results showed a two-phase virus removal kinetic with a high decrease in the first 24 h of depuration and 5 days necessary to completely remove rotavirus.     

A novel environmental indicator for monitoring of pesticides

The identification of an indicator for monitoring pesticides is a very effective analytical approach because it allows one to schedule and simplify the analytical routine. In this study, a new indicator has been designed, which has to be able to define a scale of priorities in the pesticides monitoring. A starting equation was developed involving the escaping tendency of a given substance from a phase (based on the Mackay model I level). The reliability of the indicator was tested by application to a model system, consisting of a defined and limited area, choosing water as matrix over a period of 6 years. A group of marker compounds was also defined to implement the predictive efficacy of the indicator. The results obtained by modeling were compared to those obtained by experimentation of the same model system. The indicator was subsequently and appropriately modified creating a new equation, including a kinetic factor, which considers the environmental degradation processes. The effect of the rectified indicator was consistent with the sales data list of compounds, when applied to the markers. The indicator developed in this study, tested as a model on specific area-phase-period (Province of Siena, water phase, 2000?C2006), is applicable to any other area-phase-period, adjusting the partition value of the Mackay model for the case under study.     

Recycling of rubble from building demolition for low-shrinkage concretes

In this project concrete mixtures were prepared that were characterized by low ductility due to desiccation by using debris from building demolition, which after a suitable treatment was used as aggregate for partial replacement of natural aggregates. The recycled aggregate used came from a recycling plant, in which rubble from building demolition was selected, crushed, cleaned, sieved, and graded. Such aggregates are known to be more porous as indicated by the Saturated Surface Dry (SSD) moisture content. The recycled concrete used as aggregates were added to the concrete mixture in order to study their influence on the fresh and hardened concrete properties. They were added either after water pre-soaking or in dry condition, in order to evaluate the influence of moisture in aggregates on the performance of concrete containing recycled aggregate. In particular, the effect of internal curing, due to the use of such aggregates, was studied. Concrete behavior due to desiccation under dehydration was studied by means of both drying shrinkage test and German angle test, through which shrinkage under the restrained condition of early age concrete can be evaluated.