Experimental and Modeling Studies for the Removal of Crystal Violet Dye from Aqueous Solutions using Eco-friendly <Emphasis Type="Italic">Gracilaria corticata</Emphasis> Seaweed Activated Carbon/Zn/Alginate Polymeric Composite Beads

This research article describes, an eco-friendly activated carbon prepared from the Gracilaria corticata seaweeds which was employed for the preparation of biodegradable polymeric beads for the efficient removal of crystal violet dye in an aqueous solution. The presence of chemical functional groups in the adsorbent material was detected using FTIR spectroscopy. The morphology and physical phases of the adsorbent materials were analyzed using SEM and XRD studies respectively. Batch mode dye adsorption behavior of the activated carbon/Zn/alginate polymeric beads was investigated as a function of dosage, solution pH, contact time, initial dye concentration and temperature. Maximum dye removal was observed at a pH of 5.0, 1 g of adsorbent dosage with 60 mg/L dye concentration, 50 min of contact time and at 30 °C. The equilibrium modeling studies were analyzed with Freundlich and Langmuir adsorption isotherms and the adsorption dynamics was predicted with Lagergren’s pseudo-first order, pseudo-second order equations and intra particle diffusion models. The process of dye removal followed a pseudo second-order kinetics rather than pseudo first order. The thermodynamic parameters like standard Gibbs free energy change (ΔG°), enthalpy change (ΔH°) and entropy change (ΔS°) were determined and the results imply that the adsorption process was spontaneous, endothermic and increases the randomness between the adsorbent and adsorbate. The results from the experimental and correlation data reveal that the Gracilaria corticata activated carbon/Zn/alginate polymeric beads have proved to be an excellent adsorbent material for the removal of CV dye.     

Perchlorate contamination of groundwater from fireworks manufacturing area in South India

Perchlorate contamination was investigated in groundwater and surface water from Sivakasi and Madurai in the Tamil Nadu State of South India. Sensitive determination of perchlorate (LOQ?=?0.005 μg/L) was achieved by large-volume (500 μL) injection ion chromatography coupled with tandem mass spectrometry. Concentrations of perchlorate were <0.005–7,690 μg/L in groundwater (n?=?60), <0.005–30.2 μg/L in surface water (n?=?11), and 0.063–0.393 μg/L in tap water (n?=?3). Levels in groundwater were significantly higher in the fireworks factory area than in the other locations, indicating that the fireworks and safety match industries are principal sources of perchlorate pollution. This is the first study that reports the contamination status of perchlorate in this area and reveals firework manufacture to be the pollution source. Since perchlorate levels in 17 out of 57 groundwater samples from Sivakasi, and none from Madurai, exceeded the drinking water guideline level proposed by USEPA (15 μg/L), further investigation on human health is warranted.     

Experimental investigation of high alcohol low viscous renewable fuel in DI diesel engine

Environmental Science and Pollution Research - This study offered a comprehensive investigation on engine performance and emission characteristics of Kirloskar make tangentially vertical (TV1)...     

Fluoride removal studies using virgin and Ti (IV)-modified Musa paradisiaca (plantain pseudo-stem) carbons

The preparation of carbons in virgin and Ti-modified forms under controlled conditions at low temperature from plantain pseudo-stem (Musa paradisiaca) was achieved. These prepared carbons were characterized for instrumental studies such as BET, FTIR, XRD, SEM with EDS and TGA to understand the chemistry and modification. The determination of IEP and pH_ZPC established the presence of positive surface sites on the virgin (VMPC) and Ti-modified (TiMPC) carbons to facilitate the sorption of fluoride. The fluoride removal efficiency as a function of time, pH, dose, initial fluoride concentration, temperature, and co-ion intervention was studied. The maximum fluoride removal of about 81.2 and 97.7% was achievable with VMPC and TiMPC, respectively, after 20 min at the pH of 2.04 and continued for the equilibrium of 60 min. Temperature was found to be influential both by way of initial increase followed by a decrease in the fluoride uptake of MPCs. Regeneration was very consistent up to 7 cycles with the residual fluoride concentration below the WHO guide line of 1.5 mg L^?1. Highest intervention due to hydrogen carbonate ions was observed during the fluoride removal process. Kinetic (pseudo-first-order, pseudo-second-order, and intra-particle diffusion) and isotherm models (Langmuir, Freundlich, and DKR) were checked for their compliance with the present sorption system. These low temperature synthesized MPCs are found to be effective candidates in the process of fluoride abatement in water.

     

Construction of ternary (1D/2D/3D) Fe2O3-supported micro pillared Cu-based MOF on chitosan with improved photocatalytic behavior on removal of paraquat

Environmental Science and Pollution Research - A hetero-structured metal organic framework of Cu-BTC and Fe2O3 nano-photocatalyst were tethered over chitosan using the hydrothermal method and...     

Causes of heavy metal contamination in groundwater of Tuticorin industrial block,Tamil Nadu,India

Environmental Science and Pollution Research - Groundwater is the major freshwater resource in urban and rural areas of India that provides potable water. The quality evaluation of existing...     

Towards cleaner degreasing method in industries: ultrasound-assisted aqueous degreasing process in leather making

Studies on ultrasound-assisted processes are gaining importance due to its effectiveness and facilitating green method in processing. Degreasing of skin/hide prior to tanning process is an important unit operation. Presence of large amounts of natural fat at the interior of skin/hide matrix makes degreasing process a challenging one. Conventionally, organic solvent and/or detergent based degreasing process are employed leading to environmental problems. In the present paper, the use of power ultrasound in aqueous degreasing process has been studied and compared with different degreasing systems. Glutaraldehyde pre-tanning has also been employed for carrying out the degreasing process at ultrasonic bath temperature. The results indicate that there is a significant increase in the degreasing efficiency due to the application of ultrasound. About 2-fold increase in fat removal has been observed due to the use of ultrasound as compared to control under the given process conditions. Comparing the degreasing efficiencies of the solvent with aqueous based ultrasonic processes, about 80% of the solvent degreasing efficiency could be obtained for aqueous degreasing process. This novel ultrasonic process helps in making aqueous degreasing process a viable option, which is eco-friendly even dispensing with temperature control measures.     

Prosopis juliflora--a green solution to decontaminate heavy metal (Cu and Cd) contaminated soils

Soil and plant samples (root and shoot) of Prosopis juliflora were collected in the vicinity of metal based foundry units in Coimbatore and assessed for their heavy metal content (Cu and Cd) to ascertain the use of P. juliflora as a green solution to decontaminate soils contaminated with Cu and Cd. The results showed that Cu and Cd content was much higher in plant components compared to their extractable level in the soil. Furthermore, there exist a strong correlation between the distance of the sources of industrial units and accumulation of heavy metals in plants. Accumulation of Cd in roots is comparatively higher than that of shoots. However, in case of Cu no such clear trend is seen. Considering the accumulation efficiency and tolerance of P. juliflora to Cd and Cu, this plant can be explored further for the decontamination of metal polluted soils. On the other hand, in view of heavy metal accumulate the practice of providing foliage and pods as fodder for live stock should be avoided.     

Effects of Copper Sulfate and Copper Nitrate in Aquatic Medium on the Restoration Potential and Accumulation of Copper in Stem Cuttings of the Terrestrial Medicinal Plant, Portulaca Oleracea Linn

The stem cuttings of the terrestrial, ornamental plant, Portulaca oleracea, grew well in distilled water by producing adventitious roots and leaves. However, when exposed to various concentrations of sulfate and nitrate salts of copper resulted in a suppression of root growth, increase in initiation time of roots and sprouts and decay of stem cuttings from the cut open end, decrease in number of leaves with an increase in concentration of copper in the growth medium. Accumulation of copper increased with increasing concentrations of both copper sulfate and copper nitrate. However, copper accumulation was greater in copper nitrate than in copper sulfate treatment. Hence, copper in the presence of nitrate is more toxic than in the presence of sulfate. The accumulation factors in all treatment concentrations were greater than 1, hence P. oleracea is a copper accumulator.