Persistent organochlorine pollutants in human serum of 50-65 years old women in the Flanders Environmental and Health Study (FLEHS). Part 2: Correlations among PCBs,PCDD/PCDFs and the use of predictive markers

In 1999, the FLEHS was set by the Flemish Ministry of Health, Belgium to assess pollutant concentrations and related health effect biomarkers in humans living in Flanders. Concentrations of selected organochlorine pesticides, polychlorinated biphenyls (PCB) and polychlorinated dibenzo-p-dioxins (PCDD) and furans (PCDF) were measured by gas chromatography-mass spectrometry and Chemical-Activated LUciferase gene eXpression (CALUX) bioassay in 47 serum pools of 200 women between 50 and 65 years living in two areas of Flanders. Correlation between TEQ values of different groups of compounds were computed in these pool results and it was found that total toxic equivalencies (TEQs) correlated well with the values of the groups of contributing compounds: mono-ortho PCBs (r = 0.77), non-ortho PCBs (r = 0.65) and PCDD/Fs (r = 0.88). The total TEQ was lower correlated to the CALUX-TEQ (r = 0.57). When calculating associations between those classes of compounds in the two studied regions separately, they were all higher correlated in the urban area compared to the more rural region. High correlation coefficients (r > 0.80) were also calculated between individual compounds and groups of compounds. It was suggested that in this studied background-exposed population, some compounds could be good predictors for a group: e.g. PCB 153 for indicator and total PCBs, PCB 118 for total PCB TEQ, PCB 156 for mono-ortho PCB-TEQs and total TEQ, 2,3,4,7,8-P5CDF for PCDD/F TEQs and total TEQs. This means that in pooled serum samples correlations between persistent organochlorine compounds are as strong as for individual POP measurements observed in earlier studies.     

Uneven distribution of urban green spaces in a coastal city in northwest Mexico

ABSTRACT

Extent and distribution of urban green spaces (UGS) in Mazatlan (Mexico) are analysed using remote sensing and GIS techniques. Vegetated areas (2,270?ha), a third of the urban area in 2015, were reclassified into green spaces (GS), urban tree (UT) and open spaces (OS), based in the normalised difference vegetation index, relating them with demographic and socioeconomic data. UGS allocation per capita amount 55?m², mainly represented by the UT class, with the largest patches associated with low developed and very high marginalised areas, and also with very low marginalised sectors, while the lowest allocation correspond to medium and low marginalisation, highly populated sector, without significant correlations. Despite the USG allocation, it is required a better urban planning to maintain public UGS and to protect the local flora, threatened by the introduction of exotic, ornamental species (64% of UT), to guarantee the provision of ecosystem services to the population.     

Curcumin and Its Analogs as a Therapeutic Strategy in Infections Caused by RNA Genome Viruses

Food and Environmental Virology - The use of natural resources for the prevention and treatment of diseases considered fatal to humanity has evolved. Several medicinal plants have nutritional and...     

The effect of alkaline pretreatment on the anaerobic digestion of fruit and vegetable wastes from a central food distribution market

Journal of Material Cycles and Waste Management - Anaerobic digestion of the organic fraction of municipal solid wastes is a well-established process for biogas production and various forms of...     

Effect of methyl tertiary butyl ether concentrations on exhaust emissions from gasoline used in the metropolitan area of Mexico City

In this work, the primary objective was to assess the impact of oxygenated fuel on the exhaust emissions from an important fraction of vehicles in the Metropolitan Area of Mexico City (MAMC). The results aim to provide information on the actual effect of MTBE on a fleet that represents more than 60% of the in-use vehicles in the MAMC. Ten vehicles were tested with a low-octane base gasoline, and 10 more with a regular-grade unleaded base gasoline. Three MTBE concentrations, 5, 10, and 15 vol %, were tested following the U.S. Federal Test Procedure (FTP). CO, total HC, and NOx from the exhaust gases were quantitatively evaluated and also characterized for FTP speciated organic emissions. From this data, the O3-forming potential of the fuels was calculated. Results show that for the fleet using low-octane gasoline, the addition of 10% MTBE substantially reduced CO emissions, but total HC concentration in the exhaust showed a modest decrease. For the regular gasoline, the 10% MTBE blend seemed to be the best choice, but there was not a significant decrease in emissions. The specific reactivity of each fuel, expressed in grams of O3 per gram of nonmethane organic gases, increased with MTBE concentration in both cases. This result is important to consider, especially for a region like Mexico City, which has high atmospheric O3 concentrations.     

Glyphosate input modifies microbial community structure in clear and turbid freshwater systems

Since it was commercially introduced in 1974, glyphosate has been one of the most commonly used herbicides in agriculture worldwide, and there is growing concern about its adverse effects on the environment. Assuming that glyphosate may increase the organic turbidity of water bodies, we evaluated the effect of a single application of 2.4?±?0.1 mg l^?1 of glyphosate (technical grade) on freshwater bacterioplankton and phytoplankton (pico, micro, and nanophytoplankton) and on the physical and chemical properties of the water. We used outdoor experimental mesocosms under clear and oligotrophic (phytoplanktonic chlorophyll a?=?2.04 μg l^?1; turbidity?=?2.0 NTU) and organic turbid and eutrophic (phytoplanktonic chlorophyll a?=?50.3 μg l^?1; turbidity?=?16.0 NTU) scenarios. Samplings were conducted at the beginning of the experiment and at 1, 8, 19, and 33 days after glyphosate addition. For both typologies, the herbicide affected the abiotic water properties (with a marked increase in total phosphorus), but it did not affect the structure of micro and nanophytoplankton. In clear waters, glyphosate treatment induced a trend toward higher bacteria and picoeukaryotes abundances, while there was a 2 to 2.5-fold increase in picocyanobacteria number. In turbid waters, without picoeukaryotes at the beginning of the experiment, glyphosate decreased bacteria abundance but increased the number of picocyanobacteria, suggesting a direct favorable effect. Moreover, our results show that the impact of the herbicide was observed in microorganisms from both oligo and eutrophic conditions, indicating that the impact would be independent of the trophic status of the water body.     

Exposure of workers in mineral processing industries in Brazil

The mining, milling and processing of uranium and thorium bearing minerals may result in radiation doses to workers. A preliminary survey pilot program, that included six mines in Brazil (two coal mines, one niobium mine, one nickel mine, one gold mine and one phosphate mine), was launched in order to determine the need to control the radioactive exposure of the mine-workers. Our survey consisted of the collection and analysis of urine samples, complemented by feces and air samples. The concentrations of uranium, thorium and polonium were measured in these samples and compared to background data from family members of the workers living in the same dwelling and from residents from the general population of Rio de Janeiro. The results from the coal mines indicated that the inhalation of radon progeny may be a source of occupational exposure. The workers from the nickel, gold and phosphate mines that were visited do not require a program to control internal radiological doses. The niobium mine results showed that in some areas of the industry exposure to thorium and uranium might occur.     

Finished leather waste chromium acid extraction and anaerobic biodegradation of the products

Due to the amounts of chromium in the leachate resulting from leather leaching tests, chromium sulfate tanned leather wastes are very often considered hazardous wastes. To overcome this problem, one option could be recovering the chromium and, consequently, lowering its content in the leather scrap. With this objective, chromium leather scrap was leached with sulfuric acid solutions at low temperature also aiming at maximizing chromium removal with minimum attack of the leather matrix. The effects of leather scrap dimension, sulfuric acid and sodium sulfate concentration in the solutions, as well as extraction time and temperature on chromium recovery were studied, and, additionally, organic matrix degradation was evaluated. The best conditions found for chromium recovery were leather scrap conditioning using 25 mL of concentrated H₂SO₄/L solution at 293 or 313 K during 3 or 6 days. Under such conditions, 30–60 ± 5% of chromium was recovered and as low as 3–6 ± 1% of the leather total organic carbon (TOC) was dissolved. Using such treatment, the leather scrap area and volume are reduced and the residue is a more brittle material showing enhanced anaerobic biodegradability. Although good recovery results were achieved, due to the fact that the amount of chromium in eluate exceeded the threshold value this waste was still hazardous. Thus, it needs to be methodically washed in order to remove all the chromium de-linked from collagen.