Effect of carbonation on the leaching of organic carbon and of copper from MSWI bottom ash

In Flanders, the northern part of Belgium, about 31% of the produced amount of MSWI bottom ash is recycled as secondary raw material. In view of recycling a higher percentage of bottom ash, a particular bottom ash fraction (Ø 0.1–2 mm) was studied. As the leaching of this bottom ash fraction exceeds some of the Flemish limit values for heavy metals (with Cu being the most critical), treatment is required.Natural weathering and accelerated carbonation resulted in a significant decrease of the Cu leaching. Natural weathering during 3 months caused a decrease of Cu leaching to <50% of its original value, whereas accelerated carbonation resulted in an even larger decrease (to ca. 13% of its initial value) after 2 weeks, with the main decrease taking place within the first 48 h.Total organic carbon decreased to ca. 70% and 55% of the initial concentration in the solid phase, and to 40% and 25% in the leachate after natural weathering and after accelerated carbonation, respectively. In the solid material the decrease of the Hy fraction was the largest, the FA concentration remained essentially constant. The decrease of FA in the leachate can be attributed partly to an enhanced adsorption of FA to Fe/Al (hydr)oxides, due to the combined effect of a pH decrease and the neoformation of Al (hydr)oxides (both due to carbonation). A detailed study of adsorption of FA to Fe/Al (hydr)oxides showed that significant adsorption of FA occurs, that it increases with decreasing pH and started above pH 12 for Fe (hydr)oxides and around 10 for Al (hydr)oxides. Depending whether FA or Hy are considered the controlling factor in enhanced Cu leaching, the decreasing FA or Hy in the leachate explains the decrease in the Cu leaching during carbonation.     

The construct validity of two burnout measures

The present study was carried out among a sample of 667 Dutch nurses and assesses three aspects of the construct validity of the two most widely used self-report burnout questionnaires: The Maslach Burnout Inventory (MBI) and the Burnout Measure (BM). Although the factorial validity of the three-dimensional structure of the MBI was convincingly demonstrated by confirmatory factor analysis with LISREL, four weak and ambiguous items were identified. Regarding the BM, some doubts have arisen about its one-dimensionality. The congruent validity of the questionnaires was well established: They both refer to the core element of the burnout syndrome (i.e. exhaustion). Moreover, linear structural analyses suggested that burnout is a two multi-dimensional construct consisting of an affective component (i.e. exhaustion) and an attitudinal component (i.e. a negative attitude towards recipients and towards one's job performance). However, the discriminant validity of the first component is rather poor since it considerably overlaps with self-reported somatic complaints and psychological strain. It is concluded that the MBI can be employed as a reliable and valid multi-dimensional indicator of burnout in professionals who work with people. The BM assesses the non-specific affective component of burnout (i.e. exhaustion) and should therefore be supplemented by a scale that measures the attitudinal component of the syndrome.     

Evaluation of Two Kurdish Refugee Camps in Iran, May 1991: The Value of Cluster Sampling in Producing Priorities and Policy

Following the end of the Gulf war in March 1991, Kurdish refugees from Iraq crossed the border into Western Iran. To plan public health interventions and to assist in priority setting for scarce resources, a rapid epidemiological assessment of two camps, Hafez and Kaliche, was conducted in May 1991. A 30 cluster sampling method was used to determine the demographics of the camp population, the morbidity and mortality from certain diseases, and the nutritional status of the children <5 years of age. The estimated population of the camps at the time of the survey was 28,500 and 22,500 for Hafez and Kaliche respectively; children < 5 years of age accounted for approximately 25 per cent of both camp populations. The mortality rate was highest in Hafez and estimated to be 2.5/10,000 per day (95%CI:0.3–5) for adults (> 14 years of age) and 4.9/10,000 per day (95%CI:2.4–7.4) for children. Diarrhoeal and respiratory diseases accounted for major morbidity in both camps with diarrhoea the commonest stated cause of death. Little malnutrition was found but it was greater in Hafez where 6 per cent (19/327) of the children between 1 and 5 years of age had a mid upper arm circumference (MUAC) <12 cm and eleven (5.2 per cent) of the 211 children measured for height and weight were below 80 per cent of the median (95%CI:2.6%;7.8%). The survey identified that morbidity and mortality were less severe than in the Kurdish camps on the Turkish border and provided information for camp authorities to plan appropriate relief interventions.     

AN INSULATED EVAPORIMETER1

Evaporation was measured from a circular evaporation pan, 18 inches in diameter and 8 inches deep. The pan was insulated on the sides and bottom using 2 inches of freon-blown polyurethane foam. A U.S. Weather Bureau Class A evaporation pan was used to obtain reference evaporation measurements. Water evaporation from the Class A pan and the insulated pan were highly correlated. Using a water-methanol mixture, the insulated pan may be operated at temperatures below 32 F; the equivalent liquid water evaporation may be determined using a regression equation.     

Process intensification in the textile industry: the role of membrane technology

Process intensification is a concept that was recently introduced in the chemical industry for the purpose of reducing environmental emissions, energy consumption and materials consumption. The principle of process intensification can be used in related industries as well; textile finishing is an exemplary activity where it may have a significant long-term added value. Membrane technology can be a key factor in the recycling and reuse of energy, water and chemicals. In this paper, an integral approach for treatment of aqueous process streams in the textile finishing industry is proposed. The proposed process includes microfiltration pretreatment of used finishing baths, followed by a dual nanofiltration (NF) unit. These can be operated at elevated temperatures so that no further energy is needed for preheating of recycle streams. In the proposed treatment scheme, the first of the NF units uses a loose nanofiltration membrane that retains most of the organic fraction but not the dissolved salts. The second unit uses a tight nanofiltration membrane, which produces a permeate fraction that can be directly reused, and a concentrated brine that is fed to a membrane crystallizer. In this unit, salts are recovered and recycled for use in new dye baths. The concentrate stream from the first NF unit is fed to a membrane distillation unit, where the high temperature is advantageously used for further concentration. The remaining fraction is not reusable, given the fact that most dyes are hydrolyzed after exhaustion of the bath, but has a significant energetic value, which can be utilized for compensation of energy losses and preheating of suppletion water, by using an incineration process with energy recovery. The concept was not tested experimentally, but a simulation for a 500 m3/d production unit shows that it is feasible, although modifications may be necessary depending on the nature of the finishing baths. Furthermore, the membrane choice in the first NF unit is a critical aspect.