Methane production from food waste leachate in laboratory-scale simulated landfill

Due to the prohibition of food waste landfilling in Korea from 2005 and the subsequent ban on the marine disposal of organic sludge, including leachate generated from food waste recycling facilities from 2012, it is urgent to develop an innovative and sustainable disposal strategy that is eco-friendly, yet economically beneficial. In this study, methane production from food waste leachate (FWL) in landfill sites with landfill gas recovery facilities was evaluated in simulated landfill reactors (lysimeters) for a period of 90 d with four different inoculum–substrate ratios (ISRs) on volatile solid (VS) basis. Simultaneous biochemical methane potential batch experiments were also conducted at the same ISRs for 30 d to compare CH₄ yield obtained from lysimeter studies. Under the experimental conditions, a maximum CH₄ yield of 0.272 and 0.294 L/g VS was obtained in the batch and lysimeter studies, respectively, at ISR of 1:1. The biodegradability of FWL in batch and lysimeter experiments at ISR of 1:1 was 64% and 69%, respectively. The calculated data using the modified Gompertz equation for the cumulative CH₄ production showed good agreement with the experimental result obtained from lysimeter study. Based on the results obtained from this study, field-scale pilot test is required to re-evaluate the existing sanitary landfills with efficient leachate collection and gas recovery facilities as engineered bioreactors to treat non-hazardous liquid organic wastes for energy recovery with optimum utilization of facilities.     

Determination of pesticide residues in IPM and non-IPM samples of mango (Mangifera indica)

Studies were conducted to analyze the residue of commonly used pesticides viz. methyl parathion, chloropyrifos, endosulfan, cypermethrin, fenvalerate, carbendazim, imidacloprid and carbaryl in mango, Dashehari variety, integrated pest management (IPM) and non-IPM samples were collected from the IPM and non-IPM orchards, Lucknow, India. We also present a method for the simultaneous determination of these pesticides in mango samples. Residues of methyl parathion, chloropyriphos, endosulfan, cypermethrin, fenvalerate were extracted from the samples with acetone: cyclohexane: ethyl acetate in the ratio 2:1:1 followed by cleanup using neutral alumina. Analysis was performed by gas chromatography-electron capture detector (GC-ECD) with a megabore column (OV-1). Residues of carbendazim, imidacloprid and carbaryl were extracted with acetone and after cleanup, analysis was performed by high performance liquid chromatography (HPLC) using photo diode array (PDA) detector. Recoveries of all the pesticides ranged between 72.7 – 110.6%, at 0.1 and 1.0 μg g^{? 1} level of fortification. The residues detected in non-IPM samples of mango were found to be below the prescribed limits of maximum residue limit (MRL) while IPM samples were free from pesticide residues.     

Study of the effect of refinery waste water exposure on Allium cepa's enzymatic antioxidant defense: probing potential biomarkers

The effects of heavy metals, hydrocarbons, and various toxicants present in Mathura Refinery Waste Water (MRWW) on Allium cepa were examined as a model plant system. The study was based on exposure of A. cepa to different concentrations of MRWW and compared to untreated control (exposure of onion bulbs with aquaguard purified water) to determine the total protein content and activities of certain antioxidant enzymes. These enzymes were evaluated for their efficacy to serve as biomarkers of refinery waste water pollution. DNA damaging potential of MRWW was also investigated. Data demonstrated maximal enhancement in ascorbate peroxidase activity subsequent to MRWW insult, although a significant increase in activities was also noted for other enzymes in the following order: superoxide dismutase?>?glutathione-S-transferase?> catalase. This is suggestive of their potency as a biomarker of MRWW toxicity. Increase in activities of monodehydroascorbate reductase (MDHAR; 152%) and deoxyribonuclease (345%) were also found in the A. cepa system as a result of MRWW exposure. In conclusion, A. cepa system might thus serve as an appropriate tool for monitoring water pollution, especially produced by petroleum waste and heavy metals in term of induction of glutathione peroxidase, MDHAR, and deoxyribonuclease activity.     

Understanding and eliminating pressure fluctuations in an extended chlor-alkali plant due to the size detail of seal pots: A design correlation

When chlorine lines from a new caustic soda plant were added to chlorine lines from an older plant that used the same chlorine compression and liquefaction systems, we encountered abnormal pressure fluctuations on the chlorine side of the new plant. These fluctuations were being transmitted to the chlorine cycle in the older plant, posing a safety hazard in both facilities. After checking the pressure control systems, a design correlation for positive-pressure seal pot was observed and it was found from the inconsistency in the sizes of those equipments in the two plants. The problem was solved by reducing the diameter of the chlorine pipeline in the positive-pressure seal pot of the new plant. After implementing this solution, pressure fluctuations were fully removed, and satisfactory pressure control was attained in both plants.     

Exploitation of iron ore tailing for the development of ceramic tiles

India ranks as the sixth largest producer of iron ore in the world. The current practice of washing iron ore in India generates as high as 18 million tonnes of tailings per year. These tailings are stored in massive ponds and pose environmental hazards. Safe disposal or utilisation of these materials thus remains a challenging task for the iron ore industry in India. The present paper describes a new development in managing these tailings by converting them into value added products such as ceramic floor and wall tiles for building application. These tiles have high strength and hardness compared to conventional tiles and conform to most of the EN standards. Energy economy and lower production costs are some other benefits.     

Analytical solution of two-dimensional advection–dispersion equation with spatio-temporal coefficients for point sources in an infinite medium using Green’s function method

In the present study analytical solutions of a two-dimensional advection–dispersion equation (ADE) with spatially and temporally dependent longitudinal and lateral components of the dispersion coefficient and velocity are obtained using Green’s Function Method (GFM). These solutions describe solute transport in infinite horizontal groundwater flow, assimilating the spatio-temporal dependence of transport properties, dependence of dispersion coefficient on velocity, and the particulate heterogeneity of the aquifer. The solution is obtained in the general form of temporal dependence and the source term, from which solutions for instantaneous and continuous point sources are derived. The spatial dependence of groundwater velocity is considered non-homogeneous linear, whereas the dispersion coefficient is considered proportional to the square of spatial dependence of velocity. An asymptotically increasing temporal function is considered to illustrate the proposed solutions. The solutions are validated with the existing solutions derived from the proposed solutions in three special cases. The effect of spatially/temporally dependent heterogeneity on the solute transport is also demonstrated. To use the GFM, the ADE with spatio-temporally dependent coefficients is reduced to a dispersion equation with constant coefficients in terms of new position variables introduced through properly developed coordinate transformation equations. Also, a new time variable is introduced through a known transformation.     

MSW stabilization in an anaerobic bioreactor landfill and evaluation of in-situ leachate treatment potential with the help of quadric model

Journal of Material Cycles and Waste Management - Recirculation of the leachate using bioreactor technology for in-situ treatment of leachate is an efficient method for reducing the contaminants...