Rate evaluation of marble damage by SO2-acidity in the vicinity of stacks

A laboratory modelling for the assessment of damage to marble by the SO₂-acidity in the vicinity of stacks has been devised. The modelling is based on the role of metal oxide particulates (also emitted by smoke-stacks) which catalytically convert SO₂ to SO₃ forming H₂SO₄ (in presence of water), which has an excessively high selectivity, compared with HNO₃, for corroding marble. The requisites of the modelling are: (1) determination of composition of the marble, (2) immersion of samples of marble blocks (after measurement of surface areas) in H₂SO₄ solutions of known concentrations, maintaining pH and temperature at their initial values, (3) determination of concentrations of Ca and Mg (major components of marble) in the leachate, and thereby evaluating the mass loss of the marble, in terms of mg marble cm^–2 day^–1, for each level of H₂S0₄ concentration, (4) application of derived data for evaluation of duration (in years) for the decay of 1 cm thickness of marble block by the process of surface corrosion. From the modelling, it was found that the duration for the damage of 1 cm thickness of the marble sample used here by SO₂ acidities of 1, 5, 10, 50 and 100 ppm are 83.01, 69.02, 31.24, 8.19 and 4.31 years respectively.     

Effect of industrial effluent on properties of groundwater

Field survey was conducted to assess the quality of underground water in four major industrial areas of Hyderabad, Andhra Pradesh, and viz., Patancheru, Katedhan, Nacharam and Jeedimetla. Ground water samples were collected from wells at different lateral distances from the effluent streams i.e., starting from a minimum distance of 20 meters to a maximum distance of 620 meters from the effluent streams and analysed for different characteristics. The survey revealed that indiscriminate disposal of the effluent of industrial complexes around Hyderabad has aggrevated the acidity, EC, TDS, COD, Cl-, SO4(2-), PO4(3-), NO3-, F and heavy metals in the ground waters. As the sampling distance from the polluting stream increased a gradual improvement in the quality of ground water was noticed.     

Solubilisation effect of spent wash on oxide-ores of manganese and iron

Samples of iron ore (haematite) and manganese ore (pyrolusite) of known compositions were equilibrated with aliquots of analysed sample of spent wash. The concentrations of iron(II), iron(III), complexed iron, manganese(II) ions and complexed Mn-ions were determined after increasing durations. One litre of the spent wash was found to extract out 141 mg of total iron and 161 mg of total manganese. In case of iron, the predominance was of iron(II) (92%), whereas in case of manganese it was of the complexed form (95%).     

In-Situ Fenton-Like Oxidation of Volatile Organics: Laboratory,Pilot, and Full-Scale Demonstrations

Laboratory, pilot, and full-scale experiments were used to evaluate and optimize the ISOTEC^SM remedial process at a warehousing facility in Union, New Jersey. Based on modified Fenton's oxidative chemistry, the ISOTEC^SM process uses a proprietary catalytic agent that delays formation of reactive hydroxyl radicals. This allows adequate dispersion of the hydroxyl radicals, which is an oxidizing agent, throughout a contaminant plume. Ground-water at the site was contaminated with high levels of gasoline and waste oil constituents, principally BTEX and MTBE. Bench scale microcosm studies were used to evaluate the appropriate site-specific stoichiometric relationships between catalyst, stabilizers, and oxidizers; the effect of contaminant type and concentration; and the pH optima. Based on results of the laboratory studies, a pilot-scale study was performed at the site. One injection point for catalyst, stabilizers, and oxidant was installed in the contaminated zone at the site, with one hydraulically connected downgradient well used for monitoring. A single treatment of the reagents in the optimal stoichiometry determined from the laboratory study was injected in-situ over a period of three days. A 98.5 percent reduction in volatile organics was observed in the area treated, with the radial extent of treatment estimated to be approximately 20 feet, based on the presence of hydroxyl radicals detected in hydraulically connected areas and at the surface. The full-scale process employed six injection points and three treatment cycles over a three-month period. Subsequent to treatment, contaminant levels were either nondetectable or were reduced to below applicable New Jersey groundwater standards, with regulatory closure on the site achieved in less than one year.     

Dissipation of chlorpyrifos in two soil environments of semi-arid India

The dissipation of chlorpyrifos (20 EC) at environment-friendly doses in the sandy loam and loamy sand soils of two semi-arid fields and the presence of pesticide residues in the harvested groundnut seeds, were monitored. The movement of chlorpyrifos through soil and its binding in the loamy sand soil was studied using 14C chlorpyrifos. Chlorpyrifos was moderately stable in both loamy sand and sandy loam soils, with half-life of 12.3 and 16.4 days, respectively. With 20 EC treatments the dissipation was slower for standing crop than seed treatment, indicative of the high degradation rates in the bioactive rhizosphere. In soil, 3,5,6-trichloro-2-pyridinol (TCP) was the principal breakdown product. Presence of 3,5,6-trichloro-2-methoxypyridine (TMP), the secondary metabolite, detected in the rhizospheric samples during this study, has not been reported earlier in field soils. The rapid dissipation of the insecticide from the soil post-application might have resulted from low sorption due to the alkalinity of the soil and its low organic matter content, fast topsoil dissipation possibly by volatilization and photochemical degradation, aided by the low water solubility, limited vertical mobility due to confinement of residues to the upper 15 cm soil layers and microbial mineralization and nucleophilic hydrolysis. Contrary to the reports of relatively greater mobility of its metabolites in temperate soils, TMP and TCP remained confined to the top 15 cm soil. The formation of bound residues (half-life 13.4 days) in the loamy sand soil was little and not "irreversible." A decline in bound residues could be correlated to decreasing TCP concentration. Higher pod yields were obtained from pesticide treated soils in comparison to controls. Post-harvest no pesticide residues were detected in the soils and groundnut seeds.     

Translocation of metals and its effects in the tomato plants grown on various amendments of tannery waste: evidence for involvement of antioxidants

A field experiment was conducted to study the effect of different amendments of tannery sludge on physiological and biochemical parameters of tomato plant (Lycopersicon esculentum L. Mill). The accumulation of metals (Cr, Fe) in different parts of tomato plants grown on tannery sludge amended soil increased in a concentration and duration-dependent manner. The accumulation of both the metals was found lowest in the fruits of the plant. The statistical analysis of the results showed an increase in chlorophyll and protein contents in lower sludge amendment ratio at all exposures followed by a decrease at highest (100%) sludge amendment ratio. Lipid peroxidation enhanced in both root and leaves of sludge grown plants of tomato at all the sludge amendments and exposure periods, which is evidenced by increased malondialdehyde content, however the maximum increase was found in the roots (43.63%) and leaves (56.66%) of the plant grown on 100% tannery sludge at 60 d, over respective controls. The level of antioxidants, cysteine, non-protein thiol and ascorbic acid increased in the sludge grown plants of tomato to cope up with stress induced by the excess amount of the heavy metals present in the tannery sludge. The maximum increase was found in cysteine content (75.53% in the leaves), non-protein thiol content (92.68% in the roots) and ascorbic acid content (29.66% in the roots) of the plant at 75% tannery sludge after 30 d. The tomato plants were found well adopted for minimizing damage induced by reactive oxygen species, when grown on tannery sludge amendments in the present study.     

The development and application of a simplified ozone modeling system (SOMS)

This paper describes the development and evaluation of a computationally efficient semi-empirical photochemical model that can be used as a screening tool to obtain quick estimates of the effect of a large number of VOC and NO_x emission control strategies on ozone concentrations. Selected control strategies can subsequently be examined with a more complex model. The model is one component of an ozone management system, the regional ozone decision model (RODM), designed to examine the costs and environmental consequences of alternate ozone abatement strategies.The model was developed by systematic simplification of a detailed photochemical model. At each step of the simplification, the simplified model was tested against observations and against results from the detailed model. The first major simplification was the introduction of a highly parameterized chemistry mechanism, originally developed by Azzi et al. (1992 Proc. 11th Int. Clean Air Conf., 4th Regional IUAPPA Conf.). This modification resulted in a factor of 5 improvement in the computational efficiency of the model. The model with the simplified chemistry was then tested by applying it to a photochemical oxidant episode in the San Joaquin Valley of California. Further improvements in computational speed and efficiency were obtained by uncoupling the chemistry from the transport of VOC and NO_x.     

Yield and Water Productivity of Winter Wheat under Various Irrigation Capacities

The Agricultural Production Systems sIMulator model validated in a prior study for winter wheat was used to simulate yield, aboveground crop biomass (BM), transpiration (T), and evapotranspiration under four irrigation capacities (ICs) (0, 1.7, 2.5, and 5 mm/day) with two nitrogen (N) application rates (N1, 94 kg N/ha; N2, 160 kg N/ha) to (1) understand the performance of winter wheat under different ICs and (2) develop crop water production function under various ICs and N rates. Evaluation was based on yield, aboveground crop BM, transpiration productivity (TP), crop water productivity (WP), and irrigation WP (IWP). Simulation results showed winter wheat yield increased with increase in N application rate and IC. However, the rate of yield increase gradually reduced with additional irrigation beyond 2.5 mm/day. A 5 mm/day IC required a total of 190 mm irrigation and produced a 5%–16% yield advantage over 2.5 mm/day. This indicates it is possible to reduce groundwater use for wheat by 50% incurring only 5%–16% yield loss relative to 5 mm/day. The TP and IWP for grain were slightly higher under IC of 1.7 mm/day (15.2–16.1 kg/ha/mm and 0.98–1.6 kg/m³) when compared to 5 mm/day (14.7–15.5 kg/ha/mm and 0.6–1.06 kg/m³), respectively. Since TP and IWPs are relatively higher under lower ICs, winter wheat could be a suitable crop under lower ICs in the region. Relationship between yield–T and yield–ET was linear with a slope of 15–16 and 9.5–10 kg/ha/mm, respectively. Editor's note : This paper is part of the featured series on Optimizing Ogallala Aquifer Water Use to Sustain Food Systems. See the February 2019 issue for the introduction and background to the series.     

Public participation in NGO-oriented communities for disaster prevention and mitigation (N-CDPM) in the Longmen Shan fault area during the Wenchuan and Lushan earthquake periods

ABSTRACT

The Longmen Shan fault area in southwest China is one of the world’s most active earthquake zones. The epicenters of the two most recent earthquakes, the 2008 Wenchuan earthquake (8.0?Ms) and the 2013 Lushan earthquake (7.0?Ms), both of which caused serious losses, were only 85?km apart. Community-based disaster risk reduction is the foundation of the disaster management system pyramid and is critical to the success of ‘sustainable hazard mitigation’. Based on multiple collaborative stakeholder perspectives, this paper examines public participation in an NGO-oriented Community for Disaster Prevention and Mitigation (N-CDPM) in the period between the two earthquakes as a multi-stage problem; N-CDPM establishment, normal operations, disaster testing, and continuous improvement. Multi-stage field research was conducted in the affected areas in the Longmen Shan fault area to examine the collaboration in each stage, after which the differences were compared across the four stages based on eight key indices; scales, core stakeholders, core network stability, mean number of lines, mean collaborative level, governments, and individual and public organization participation. The government participation, individual participation, and public organization participation are then discussed. This paper provides a novel research approach to CDPM in multiple earthquake regions and gives rich insights into the collaboration between the government and the public for N-CDPM.     

Metal remediation potential of naturally occurring plants growing on barren fly ash dumps

The present study aimed to elucidate the remediation potential of visibly dominant, naturally growing plants obtained from an early colonized fly ash dump near a coal-based thermal power station. The vegetation comprised of grasses like Saccharum spontaneum L., Cynodon dactylon (L.) Pers., herbs such as Tephrosia purpurea (L.) Pers., Sida rhombifolia L., Dysphania ambrosioides (L.) Mosyakin & Clemants, Chromolaena odorata (L.) King & H.E. Robins along with tree saplings Butea monosperma (Lam.) Taub. The growth of the vegetation improved the N and P content of the ash. Average metal concentrations (mg kg^?1) in the ash samples and plants were in order Mn (345.1)?>?Zn (63.7)?>?Ni (29.3)?>?Cu (16.8)?>?Cr (9.9)?>?Pb (1.7)?>?Cd (0.41) and Cr (58.58)?>?Zn (52.74)?>?Mn (39.09)?>?Cu (10.71)?>?Ni (7.45)?>?Pb (5.52)?>?Cd (0.14), respectively. The plants showed fly ash dump phytostabilization potential and accumulated Cr (80.19–178.11 mg kg^?1) above maximum allowable concentrations for plant tissues. Positive correlations were also obtained for metal concentration in plant roots versus fly ash. Saccharum spontaneum showed highest biomass and is the most efficient plant which can be used for the restoration of ash dumps.