Microbial biomass governs enzyme activity decay during aging of worm-worked substrates through vermicomposting

Vermicomposting is the biooxidation and stabilization of organic matter involving the joint action of earthworms and microorganisms, thereby turning wastes into a valuable soil amendment called vermicompost. Studies have focused on the changes in the type of substrates available before and after vermicomposting, but little is known on how these changes take place, especially those changes related with maturation of vermicompost. This study investigated the effects of aging on the microbiological properties of fresh vermicompost produced from pig slurry by analyzing the substrate after the earthworms had left it. We incubated 16-wk-old vermicompost and sampled it after 15, 30, 45, and 60 d analyzing microbial biomass and activity (assessed as microbial biomass N and basal respiration respectively) and four enzymatic activities (beta-glucosidase, cellulase, protease, and alkaline phosphatase). Aging of vermicompost resulted in decreases of microbial biomass and activity. Three of the four enzymes analyzed also showed decrease. An initial increase followed by a rapid decrease in alkaline phosphatase was also recorded. High and significant correlations between microbial biomass and beta-glucosidase (r = 0.62, P < 0.001), cellulase (r = 0.56, P < 0.01), and protease (r = 0.82, P < 0.001) were found. Results suggest that there may be two steps involved in the aging dynamics of vermicompost with regards to extracellular enzyme activity; the first step was characterized by a decrease in microbial populations, which resulted in a reduction in the synthesis of new enzymes. The second step was the degradation of the pool of remaining enzymes. This dynamic does not seem to be affected by earthworms because similar decaying patterns of microbial biomass and activity were found in substrate where earthworms were present.     

Effects of gas flow rate, inlet concentration and temperature on the biofiltration of toluene vapors

In this work the variation in the elimination capacity of a biofilter as a function of the gas flow and toluene concentration was studied. A bioreactor 0.75 m high x 14.5 cm diameter was used, divided into three equal stages, using compost to support the microorganisms, and sea shells to control the pH. The biofiltration of toluene was evaluated for flows between 0.12 and 0.73 m(3)h(-1) in a concentration range of 1-3.2 gm(-3). It was observed that on increasing the toluene inlet load by 90% (from 37 to 70 gm(3)h(-1)), the conversion by the biofilter varied by only 5% (from 98% to 93%). The biofiltration system used achieved elimination capacities of up to 82 gm(-3)h(-1) for a toluene load of 100 gm(-3)h(-1).     

A Social Analysis of the Bioinvasions of Dreissena polymorpha in Spain and Hydrilla verticillata in Guatemala

Human agency plays a key role in the processes of biological invasions. This comprises not only the human role in the configuration of driving forces or in the perception of the impacts, but also the conceptualization of alien species themselves as an environmental problem. This paper examines different stakeholders' positions in bioinvasion processes at different scales, and it looks at their relevance for the management of invasive species. It compares two cases: the invasion process of Dreissena polymorpha in the Ebro River in Spain and the case of Hydrilla verticillata in Lake Izabal, Guatemala. Our results are structured according to impacts and to management options. The discussion focuses on the relevance of incorporating the different stakeholders' interests and values in the analysis and management of biological invasions. Although social analysis of stakeholders' positions is necessary in order to foster management actions, it also reveals conflicts on the relevant criteria and on the very definition of invasive species.     

Metal/metalloid contamination and isotopic composition of lead in edible mushrooms and forest soils originating from a smelting area

High metal contents in edible mushrooms growing in severely contaminated industrial areas pose an important toxicological risk. In the presented study, trace element (Pb, Cd, Zn, Cu, Ag, As, Se) contents were determined in caps and stipes of three different edible mushroom species (Boletus edulis Bull. Fr., Xerocomus badius Fr. Gilb., Xerocomus chrysenteron Bull. Quél.). Additionally, information about the chemical fractionation of metals in separate soil horizons and Pb isotopic data from soils and fruiting bodies allowed a more detailed insight on the uptake mechanisms of metals by the studied mushroom species. Total metal and metalloid concentrations in the organic soil horizons reached 36234 mg Pb kg(-1); 11.9 mg Cd kg(-1); 519 mg Zn kg(-1); 488 mg Cu kg(-1); 25.1 mg Ag kg(-1); 120 mg As kg(-1) and 5.88 Se mg kg(-1). In order to evaluate the accumulation capacity of the studied species, bioconcentration factors (BCF) were calculated for separate trace elements. For selected metals (Pb, Cd, Zn, Cu), a modified BCF calculation (using EDTA-extractable concentrations of metals in soil) was proposed. High contents of Pb (up to 165 mg kg(-1)) and Cd (up to 55 mg kg(-1)) exceeded all the regulatory limits in all the studied species. This was also the case for Se (up to 57 mg kg(-1)) in B. edulis. Intensive consumption of this species grown in such polluted areas can therefore pose toxicological risks for human health. A novel finding was that X. badius can act as an Ag accumulating species when grown at polluted sites due to the high concentrations of Ag (up to 190 mg kg(-1)) in caps. Pb isotopic data showed that Pb originating from the recent air pollution control residues is present mainly in the exchangeable/acid-extractable fraction of the organic horizons and is taken up by fruiting bodies; especially in the case of B. edulis, where fast Pb accumulation occurs. Due to the high species-dependent variations of metal contents, the studied mushrooms are not suitable as bioindicators of environmental pollution.     

Expedient Metrics to Describe Plant Community Change Across Gradients of Anthropogenic Influence

Human influence associated with land use may cause considerable biodiversity losses, namely in oceanic islands such as the Azores. Our goal was to identify plant indicator species across two gradients of increasing anthropogenic influence and management (arborescent and herbaceous communities) and determine similarity between plant communities of uncategorized vegetation plots to those in reference gradients using metrics derived from R programming. We intend to test and provide an expedient way to determine the conservation value of a given uncategorized vegetation plot based on the number of native, endemic, introduced, and invasive indicator species present. Using the metric IndVal, plant taxa with a significant indicator value for each community type in the two anthropogenic gradients were determined. A new metric, ComVal, was developed to assess the similarity of an uncategorized vegetation plot toward a reference community type, based on (i) the percentage of pre-defined indicator species from reference communities present in the vegetation plots, and (ii) the percentage of indicator species, specific to a given reference community type, present in the vegetation plot. Using a data resampling approach, the communities were randomly used as training or validation sets to classify vegetation plots based on ComVal. The percentage match with reference community types ranged from 77 to 100 % and from 79 to 100 %, for herbaceous and arborescent vegetation plots, respectively. Both IndVal and ComVal are part of a suite of useful tools characterizing plant communities and plant community change along gradients of anthropogenic influence without a priori knowledge of their biology and ecology.     

Evaluation of different amendments to stabilize antimony in mining polluted soils

Soil pollution with antimony is of increasing environmental concern worldwide. Measures for its control and to attenuate the risks posed to the ecosystem are required. In this study the application of several iron and aluminium oxides and oxyhydroxides as soil amendments was evaluated in order to assess their feasibility to stabilize Sb in mining polluted soils. Mine soils with different pollution levels were amended with either goethite, ferrihydrite or amorphous Al oxide at various ratios (0–10%). The effectiveness of such treatments was assessed by both batch and column leaching tests. The use of ferrihydrite or amorphous Al oxide proved to be highly effective to stabilize Sb. Immobilization levels of 100% were found when doses of 5% ferrihydrite or 10% amorphous Al oxide were applied, regardless of the soil Sb load. Column leaching studies also showed a high Sb leaching reduction (>75%) when soils were amended with 1% ferrihydrite or 5% amorphous Al oxide. Moreover, such treatments proved to simultaneously immobilize As and Pb in a great extent when soils were also polluted with such toxic elements.     

Mineralization of integrated gasification combined-cycle power-station wastewater effluent by a photo-fenton process

The aim of this work was to study the mineralization of wastewater effluent from an integrated-gasification combined-cycle (IGCC) power station sited in Spain to meet the requirements of future environmental legislation. This study was done in a pilot plant using a homogeneous photo-Fenton oxidation process with continuous addition of H₂O₂ and air to the system.The mineralization process was found to follow pseudo-first-order kinetics. Experimental kinetic constants were fitted using neural networks (NNs). The NNs model reproduced the experimental data to within a 90% confidence level and allowed the simulation of the process for any values of the parameters within the experimental range studied. At the optimum conditions (H₂O₂ flow rate = 120 mL/h, [Fe(II)] = 7.6 mg/L, pH = 3.75 and air flow rate = 1 m³/h), a 90% mineralization was achieved in 150 min.Determination of the hydrogen peroxide consumed and remaining in the water revealed that 1.2 mol of H₂O₂ was consumed per each mol of total organic carbon removed from solution. This result confirmed that an excess of dissolved H₂O₂ was needed to achieve high mineralization rates, so continuous addition of peroxide is recommended for industrial application of this process.Air flow slightly improved the mineralization rate due to the formation of peroxo-organic radicals which enhanced the oxidation process.     

Sampling optimization, at site scale, in contamination monitoring with moss, pine and oak.

With the aim of optimizing protocols for sampling moss, pine and oak for biomonitoring of atmospheric contamination and also for inclusion in an Environmental Specimen Bank, 50 sampling units of each species were collected from the study area for individual analysis. Levels of Ca, Cu, Fe, Hg, Ni, and Zn in the plants were determined and the distributions of the concentrations studied. In moss samples, the concentrations of Cu, Ni and Zn, considered to be trace pollutants in this species, showed highly variable long-normal distributions; in pine and oak samples only Ni concentrations were log-normally distributed. In addition to analytical error, the two main source of error found to be associated with making a collective sample were: (1) not carrying out measurements on individual sampling units; and (2) the number of sampling units collected and the corresponding sources of variation (microspatial, age and interindividual). We recommend that a minimum of 30 sampling units are collected when contamination is suspected.     

Removal of famoxadone,fluquinconazole and trifloxystrobin residues in red wines: Effects of clarification and filtration processes

The effects of six clarification agents [egg albumin, blood albumin, bentonite + gelatine, charcoal, polyvinylpolypyrrolidine (PVPP) and silica gel] on the removal of residues of three fungicides (famoxadone, fluquinconazole and trifloxystrobin) applied directly to a racked red wine, elaborated from Monastrell variety grapes from the D.O. Region of Jumilla (Murcia, Spain) were studied. The clarified wines were filtered with 0.45 μ m nylon filters to determine the influence of this winemaking process in the disappearance of fungicide residues. Analytical determination of fluquinconazole and trifloxystrobin was performed by gas chromatography with electron captor detector (ECD), while that of famoxadone using an HPLC equipped with a diode array detector (DAD). Generally, trifloxystrobin is the fungicide that is the lowest persistent one in wines, except in the egg albumin study whereas, the most persistent one is fluquinconazole. The elimination depends on the nature of the active ingredient, though the water stability in the presence of light within it has more influence than the solubility and polarity of the product itself. The most effective clarifying agents were the charcoal and PVPP. The silica gel and bentonite plus gelatine were not enough to reduce considerably the residual contents in the wine clarified with them. In general terms, filtration is not an effective step in the elimination of wine residues. The greatest removal after filtration is obtained in wines clarified with egg albumine and bentonite plus gelatine, and the lowest in those clarified with PVPP.