Aquatic risk assessment of the new rice herbicide profoxydim

A tiered protocol for assessing ecological risks has been applied to the rice pesticide profoxydim. The initial assessment (Tier I) was based on toxicity exposure ratio (TER) calculations based on laboratory data using a worst-case rice scenario. The first refinement (Tier II) was based on direct toxicity assessment (DTA) of water samples collected during a field-mesocosm study. Finally, a higher-tier assessment on the in situ assessment of paddy community responses (field-mesocosm-Tier III) was performed. A successive application of three pesticides, the herbicides azimsulfuron, propanil and the insecticide malathion, was used as reference controls. The refined assessments indicated a lower risk than that predicted from TER estimations. DTA-based Tier II showed toxicity effects only for concentrations above the recommended dose of profoxydim. Effects for reference controls were observed in DTA which were not expected from Tier I. The field-mesocosm study confirmed these effects but also showed that they were transient and of low relevance.     

Biodegradation studies of selected priority acidic pesticides and diclofenac in different bioreactors

The biodegradation of selected priority acidic pesticides MCPP, MCPA, 2,4-D, 2,4-DP and bentazone and the acidic pharmaceutical diclofenac was investigated using a membrane bioreactor (MBR) and a fixed-bed bioreactor (FBBR). A pilot plant MBR was fed with raw water spiked with the selected compounds. The experiment was repeated every week during four weeks to enhance the adaptation of microorganisms. In order to further study the biodegradability of these compounds, degradation studies in a FBBR were carried out. All the samples were analysed by solid phase extraction-gas chromatography-mass spectrometry (SPE-GC-MS). The results indicate that in the MBR compounds except for bentazone were eliminated within the first day of the experiment at rates ranging from 44% to 85%. Comparing these results with the degradation rates in the FBBR showed that in the latter only MCPP, MCPA 2,4-D and 2,4-DP were degraded after a much longer adaptation phase of microorganisms.     

Passive air sampler as a tool for long-term air pollution monitoring: Part 1. Performance assessment for seasonal and spatial variations

The potential of passive air sampling devices (polyurethane foam disks) to assess the influence of local sources on the quality of the surrounding environment was investigated. DEZA Valasske Mezirici, a coal tar and mixed tar oils processing plant, and Spolana Neratovice, a chemical factory with the history of high production of organochlorinated pesticides (OCPs), were selected as the point sources of PAHs, and OCPs, respectively. Levels of PCBs, OCPs and PAHs were determined for all sampling sites and sampling periods. The study brought useful data about the air concentrations of POPs in the investigated regions. More important, it provided information on the transport and fate of POPs in the vicinity of local sources of contamination useful for the estimation of their influence. Very good capability of passive samplers to reflect temporal and spatial fluctuation in concentrations of persistent organic pollutants in the ambient air was confirmed which makes them applicable for monitoring on the local scale.     

Passive air sampler as a tool for long-term air pollution monitoring: Part 2. Air genotoxic potency screening assessment

The capability of passive air sampling to be employed in the evaluation of direct genotoxicity of ambient air samples was assessed. Genotoxic effects of the total extracts from the polyurethane foam filters exposed for 28 days during a regional passive air sampling campaign were investigated. Twenty sampling sites were selected in Brno city on the area of approximately 20x20 km in October and November 2004. Brno is the second largest city of the Czech Republic, highly industrialized with approximately 370,000 of permanent inhabitants. The levels of PAHs, PCBs, and chlorinated pesticides were determined in all samples. Fraction of each extract was also assayed in the bacterial genotoxicity test using Escherichia coli sulA::lacZ. Complete dose-response relationships of the air extracts were determined. The statistical analysis showed significant correlation between observed biological effects and PAHs concentrations in samples.     

Bioassay for determining sensitivity to sulfosulfuron on seven plant species

This study presents a bioassay procedure, based on the root and shoot growth parameters, for the determination of the herbicide sulfosulfuron (1-(4,6 dimethoxypyrimidin-2-yl)-3-(2-ethylsulfonylimidazo[1,2-a]pyridin-3-ylsulfonil)urea) sensitivity on seven vegetal species. Plant response to sulfosulfuron was calculated with the equations fitted to the root growth data as a function of the logarithm of the herbicide concentration by non-linear regression and was used to calculate the doses for 10, 30 and 50% inhibition of root growth (EC10, EC30 and EC50). The results indicate that the phytotoxic effect of sulfosulfuron in all the species assayed followed the order: flax > maize > onion > vetch > lepidium sativum > tomato > barley. These species showed phytotoxicity at low levels of sulfosulfuron and flax appeared to be the most susceptible species to sulfosulfuron (0.001 mg/L).     

Evaluation of heavy metal acute toxicity and bioaccumulation in soil ciliated protozoa

Laboratory toxicity tests, using ciliated protozoa, are scarce and they have been carried out usually with freshwater species. In this study, we have analysed the acute cytotoxicity of Cd, Zn and Cu in five different strains of very common soil ciliate species (Colpoda steinii, Colpoda inflata and Cyrtolophosis elongata), which were isolated from very different soil samples (polluted or not with heavy metals). Soil ciliates are quite resistant to heavy metals pollution with regard to ciliates from other habitats. The toxicity sequence was Cd>Cu>Zn. Results from Cd+Zn mixtures indicated that Cd cytotoxicity decreases in the presence of low or moderate Zn concentrations. A broad heavy metal resistance level diversity exists among isolates of colpodid ciliates and it is seen to be a genetic feature rather than a habitat dependence. Bioaccumulation is seen to be the main mechanism involved in the metal resistance, except for Cu. For the first time in ciliates, a fluorescent method has been applied to detect Zn intracellular deposits. This methodology might be an useful tool for monitoring heavy metal pollution in soils.     

Adult-supervised practice driving for adolescent learners: The current state and directions for interventions

IntroductionThe aim of this study was to quantify and identify correlates to the amount of parent-supervised behind-the-wheel practice hours by novice teen drivers.MethodsA national survey of 945 parents of recently licensed teen drivers was conducted. Multivariate logistic regression was used to identify factors related to the number of practice hours completed.ResultsSixty-one percent of parents reported practicing 50 or more hours with their teen. Two-parent involvement was associated with more practice hours, though use of a professional driving instructor was not. Parents of teens licensed in states mandating 50 or more hours of practice driving were more likely to report at least 50 practice hours than those in states mandating 20–40 hours or in states without mandates.Impact on IndustryThe findings underscore the integral role of parents in the learning to drive process and provide further support for GDL requirements for practice hours.     

Working conditions,psychological/physical symptoms and occupational accidents. Bayesian network models

Each day thousands of workers suffer occupational accidents of varying degrees of severity. Accidents at work render workers incapable of carrying out their day to day activities, either temporarily or permanently, and they also have detrimental effects on family life, the company, and the general public. In order to reduce the occupational accident rate, it is necessary to determine the causes of those accidents. Although there are many different types of accidents, they generally stem from poor working conditions. The purpose of this study was to analyze the influence of working conditions on occupational accidents from data gathered in the VI National Survey of Working Conditions (VI NSWCs) in 2007. This survey utilized a random sample of the active population of Spain. The sample comprised 11,054 people (5917 males and 5137 females). In order to carry out the study, a probabilistic model was built using Bayesian networks. The model included the following variables: hygiene conditions, ergonomic conditions, job demands, physical symptoms, psychological symptoms, and occupational accidents. The study demonstrated that there were strong relationships between hygiene conditions and occupational accidents; it has been shown that poor hygienic conditions duplicate the probability of accident. Physical symptoms increased almost 50% due to poor ergonomic conditions. And finally, high job demands almost duplicated the psychological symptoms. The investigation also showed a high degree of interdependence between physical and psychological symptomatologies and the relationship between these and occupational accidents.     

Validity and reliability of a job factors questionnaire related to the work tasks of physical therapists

Physical therapists engage in work tasks that expose them to occupational risk factors related to musculoskeletal disorders. Due to the gap in the literature on instruments focused on those workers, this study adapted a job factors questionnaire to physical therapists, and assessed its psychometric properties. The questionnaire was adapted and its content validity was established. The psychometric properties were evaluated among 142 physical therapists. Reliability was verified using the temporal-stability design and internal consistency. Construct validity was assessed with the known-groups technique. Test-retest results demonstrated intraclass correlation coefficients between .82 and .90 (p < .001). Cronbach's α of .91 verified the reliability of the questionnaire. The known-groups technique demonstrated a statistically significant difference on the scores of the items when physical therapists were compared to office workers. The results indicated that the adapted questionnaire had acceptable psychometric properties for assessing problematic job factors among physical therapists working in hospitals.