Mineralization,metabolism and formation of non-extractable residues of 14C-labelled organic contaminants during pilot-scale composting of municipal biowaste

Use of municipal biowaste for composting instead of its disposal has become a major source of concern as regards contamination by hazardous substances. To elucidate the hazard potential of compost application, municipal biowaste was amended with 14C-labelled model substances (pyrene, simazine) and incubated in a pilot-scale composting simulation system. A mass balance incorporating the mineralization, metabolism and sorption of the two model substances was established over a period of 370 days. The results are quite different for the two chemicals, reflecting their intrinsic properties: more than 60% of the applied 14C-simazine resulted in non-extractable residues (NER). Silylation experiments indicated that the formation of NER from simazine and its metabolites was due to both physical entrapment in the matrix and chemical binding. The mineralization and formation of NER represented the major pathways of disappearance for pyrene during one year of composting, accounting for 60 and 26% of initially applied 14C-activity, respectively. Mineralization occurred delayed after the thermophilic phase. As regards remobilization, release of pyrene from NER during composting could be excluded, whereas simazine, data were inconclusive in this respect.     

Performance of the Button Personal Inhalable Sampler for the measurement of outdoor aeroallergens

No personal aerosol sampler has been evaluated for monitoring aeroallergens in outdoor field conditions and compared to conventional stationary aerobiological samplers. Recently developed Button Personal Inhalable Aerosol Sampler has demonstrated high sampling efficiency for non-biological particles and low sensitivity to the wind direction and velocity. The aim of the present study was to evaluate the Button Sampler for the measurement of outdoor pollen grains and fungal spores side-by-side with the widely used Rotorod Sampler. The sampling was performed for 8 months (spring, summer and fall) at a monitoring station on the roof of a two-storied office building located in the center of the city of Cincinnati. Two identical Button Samplers, one oriented towards the most prevalent wind and the other towards the opposite wind and a Rotorod Sampler were placed side-by-side. The total fungal spore concentration ranged from 129 to 12,980 spores m(-3) (number per cubic meter of air) and the total pollen concentration from 4 to 4536 pollen m(-3). The fungal spore concentrations obtained with the two Button Samplers correlated well (r = 0.95; p<0.0001). The pollen data also showed positive correlation. These findings strongly support the results of earlier studies conducted with non-biological aerosol particles, which demonstrated a low wind dependence of the performance of the Button Sampler compared to other samplers. The Button Sampler's inlet efficiency was found to be more dependent on wind direction when sampling larger sized Pinaceae pollen grains (aerodynamic diameter approximately 65 mum). Compared to Rotorod, both Button Samplers measured significantly higher total fungal spore concentrations. For total pollen count, the Button Sampler facing the prevalent wind showed concentrations levels comparable to that of the Rotorod, but the Button Sampler oriented opposite to the prevalent wind demonstrated lower concentration levels. Overall, it was concluded that the Button Sampler is efficient for the personal sampling of outdoor aeroallergens, and is especially beneficial for aeroallergens of small particle size.     

Two-dimensional gap analysis: a tool for efficient conservation planning and biodiversity policy implementation

The maintenance of biodiversity by securing representative and well-connected habitat networks in managed landscapes requires a wise combination of protection, management, and restoration of habitats at several scales. We suggest that the integration of natural and social sciences in the form of "Two-dimensional gap analysis" is an efficient tool for the implementation of biodiversity policies. The tool links biologically relevant "horizontal" ecological issues with "vertical" issues related to institutions and other societal issues. Using forest biodiversity as an example, we illustrate how one can combine ecological and institutional aspects of biodiversity conservation, thus facilitating environmentally sustainable regional development. In particular, we use regional gap analysis for identification of focal forest types, habitat modelling for ascertaining the functional connectivity of "green infrastructures", as tools for the horizontal gap analysis. For the vertical dimension we suggest how the social sciences can be used for assessing the success in the implementation of biodiversity policies in real landscapes by identifying institutional obstacles while implementing policies. We argue that this interdisciplinary approach could be applied in a whole range of other environments including other terrestrial biota and aquatic ecosystems where functional habitat connectivity, nonlinear response to habitat loss and a multitude of economic and social interests co-occur in the same landscape.     

Endocrine disruption of water and sediment extracts in a non-radioactive dot blot/RNAse protection-assay using isolated hepatocytes of rainbow trout

Goal, Scope and Background In order to evaluate the estrogenic activity of sediments and XAD water extracts of selected sites of the catchment area of the River Neckar, a river system in Southern Germany, an integrative assessment approach was used to assess the ecological hazard potential of endocrine-disrupting compounds in sediment and water. Methods The approach is based on estrogen receptor-mediated vitellogenin synthesis induced in isolated hepatocytes of rainbow trout and quantified in a non-radioactive dot blot/RNAse protection-assay in parallel to comprehensive chemical analyses of estrogenic substances. Results and Discussion Numerous investigated extracts revealed an estrogen activity comparable to that of the positive control (1 nM 17?-estradiol corresponding to 270 ng/L in the test medium). Based on a concentration factor of 30 in the extracts and a recovery of XAD resins of approximately 80 %, 17?-estradiol equivalent concentrations between 20 and 26.7 ng/L could be calculated downstream of a sewage treatment plant (< 0.1 ng/L for a reference site). A comparison of the bioassay-derived Bio-TEQs (toxicity equivalents) and the Chem-TEQs revealed a high correlation with a Pearson coefficient of 0.85, indicating that the same ranking of the samples could be obtained with respect to the endocrine disrupting potential with both chemical and bioanalytical analysis. However, the TEQ concentrations computed from chemical analyses were significantly lower than the bioassay-derived TEQ concentrations. In fact, in none of the samples, more than 14 % of the vitellogenin-inducing potency could be attributed to the substances (steroids, alkylphenols, bisphenol A, diethylstilbestrol) analyzed. A comparison of the endocrine disrupting potential of sediments extracted by the solvents acetone and methanol revealed lower biological effects for acetone-extracted samples. Possible reasons may be a masking of endocrine effects in acetone extracts by cytotoxicity, a low extraction efficiency of the solvent acetone, or anti-estrogen potencies of some extracted sediment compounds. Using a mass balance approach, the contribution of the compounds analyzed chemically (Chem-TEQs) to the total endocrine activity (Bio-TEQs) was calculated. Based on the very low detection limits, particularly of the steroids with their high TEF factors, results revealed that a calculation of the Chem-TEQs is associated with considerable scale inaccuracy: Whereas only 7-15 % of the biological effectiveness (Bio-TEQs) could be explained by endocrine substances identified above the detection limits, the assumption of concentrations slightly below the given detection limits would result in a significant over estimation (137-197 %) of the Bio-TEQs. Even the interassay variation of the dot blot assay with different fish donors for primary hepatocyte (factor 2 - 2.5) is relatively low, when compared to the large range of the Chem-TEQ concentrations (factor 20) obtained when applying different modes of calculation. Conclusions and Outlook Overall, only a minor portion of the endocrine activity detected by bioassays could be linked to compounds identified by chemical analysis. In vitro assays for assessment of endocrine activities are useful as sensitive integrating methods that provide quantitative estimates of the total activity of particular receptor-mediated responses. Although discrepancies may also result from different bioanalytical approaches, it is overall likely that bioanalytical and not chemical analytical approaches give the correct estimate of endocrine disrupting potencies in environmental samples. As a conclusion, assessment of endocrine disruption based on chemical analysis alone does not appear sufficient and further research into the spectrum of substances with potential endocrine activity as well as into additive or even synergistic effects in complex environmental samples is urgently needed.     

Treatment of chlorinated solvents by TiO2 photocatalysis and photo-Fenton: influence of operating conditions in a solar pilot plant

Titanium dioxide photocatalysis (using 20 0mg l(-1) of TiO2), under aerobic and anaerobic conditions, and photo-Fenton (2 and 56 mg l(-1) iron) were applied to the treatment of different NBCS (non-biodegradable chlorinated solvents), such as dichloroethane, dichloromethane and trichloromethane dissolved in water at 50 mg l(-1). All the tests were performed in a 35-l solar pilot plant with compound parabolic collectors (CPCs) under natural illumination. The two solar treatments were compared with attention to chloride release and TOC mineralisation, as the main parameters. Photo-Fenton was found to be the more appropriate treatment for these compounds, assuming volatilisation as a drawback of photocatalytic degradation of NBCS dissolved in water. In this context, several operating parameters related to NBCS degradation, e.g., treatment time, temperature, hydrogen peroxide consumption and volatility of parent compounds are discussed. The correct choice of operating conditions can very often diminish the problem of volatilisation during treatment.     

Monitoring of polychlorinated biphenyls in Belgian human adipose tissue samples

Polychlorinated biphenyls (PCBs) were monitored in Belgian human adipose tissue samples from deceased individuals (n=100). Their mean age was 52, ranging from 2 to 91 years. There were 57 men and 43 women. Other known variables were date of autopsy and place of residence. No information about diet or occupation was available. The seven marker congeners PCB 28, 52, 101, 118, 138, 153 and 180 were analysed in the samples with a GC-MS/MS method validated according to Commission Decision 2002/657/EC. Extracted fat was cleaned-up over a glass column filled with n-hexane, acid silica, deactivated alumina and anhydrous sodium sulfate. The whole procedure was subjected to a rigorous quality control programme with retention times, ion chromatograms and intensity ratios of the monitored product ions as identification criteria. The total PCB concentration ranged between 10 and 1640 ng g-1 fat, with a mean value of 658 ng g-1 fat. In the age groups of 0-9 (n=1), 10-19 (n=4), 20-29 (n=11), 30-39 (n=13), 40-49 (n=15), 50-59 (n=14), 60-69 (n=14), 70-79 (n=20), 80-89 (n=6) and 90-99 (n=2), the mean total PCB concentrations were 10, 134, 253, 445, 557, 687, 807, 962, 959, and 1191 ng g-1 fat, respectively. So, there was an increase of PCB body burden with age. For the male subjects (n=57; mean age of 53) the mean total PCB concentration was 633 ng g-1 fat. For the female subjects (n=43; mean age of 52) it was 690 ng g-1 fat. There was no significant sex-related difference in the concentrations of marker PCBs.     

The relationship between surface adsorption and the hydrolysis of amitraz in anionic surfactant solutions

The adsorption of amitraz to various adsorbents was studied in terms of the amount and rate of adsorption and the effect that adsorption had on the stability of amitraz in an aqueous environment. Adsorption results showed that in terms of their ability to adsorb amitraz from solution the adsorbents tested in this study can be ordered as follows: coarse carbon > cation exchange resin > or = anion exchange resin > fine carbon. Amitraz was not adsorbed on sand and potassium oxihumate. Adding sodium lauryl sulfate and potassium oxihumate to aqueous suspensions of suspended adsorbents containing adsorbed amitraz showed that both these anionic surfactants significantly increased the hydrolysis rate because the half-lives for amitraz was reduced from 27 days for a suspension to only 8 hours for amitraz adsorbed to a cation exchange resin and suspended in an aqueous buffer pH 5.8 containing 0.5% of the anionic surfactant sodium lauryl sulfate and 12 hours when 1% potassium oxihumate was added.     

Disease suppression on greenhouse tomatoes using plant waste compost

This study investigated the disease suppression abilities of a compost amendment that was added to the conventional growing medium, yellow cedar sawdust, used in most British Columbia vegetable greenhouses. The compost amendment was produced in a controlled, in-vessel process primarily from greenhouse crop waste materials. The pathogen and cultivar under study were Fusarium oxysporum f. sp. radicis-lycopersici (FORL) on Dombito (FORL-susceptible) beefsteak greenhouse tomatoes. Significant reduction of Fusarium crown and root rot was also realized in tomato seedlings by applying compost amendment from several different batches, as a seed cover or plug substitute. In a greenhouse trial, disease suppression using a mixture of 2:1 sawdust to amendment by volume was shown to be most effective. As a result, the tomato yield over a nine-month growing season was improved by 74% where the medium was deliberately infested with FORL.     

Influence of metal oxides on PCDD/Fs formation from pentachlorophenol

Chlorophenols (ClPhs) are considered as important precursors for PCDD/Fs formation. The influences of series of metal oxides including MgO, Al2O3, CaO, BaO, TiO2, V2O5, MnO2, Fe2O3, Co3O4, CuO, Ag2O, ZnO, HgO, SnO, PbO, La2O3, CeO2, and Eu2O3 on PCDD/Fs formation from pentachlorophenol (PCP) were investigated in a laboratory-scale reactor. The results indicated that most of the above metal oxides have obvious suppressing effects on the total amount of PCDD/Fs formation from precursor PCP except for CuO, ZnO, MnO2, TiO2 and Co3O4 with promotion effects at 280 degrees C for 2 h. Although MgO, Al2O3, Fe2O3, PbO, La2O3 and Eu2O3 could reduce the amount of octachlorinated dibenzo-p-dioxin (OCDD), they promote the formation of more toxic 1,2,3,4,6,7,8-HpCDD at the same time. The total suppressing efficiencies of several metal oxides including CaO, BaO, PbO, Ag2O, HgO and SnO which have lower Z/r (charge to radius ratio) <2 are all over 90%. The theories of generalized acid-base and atomic parameter (Z/r) were used to speculate the effecting mechanisms. The factors including time and temperature on suppressing efficiencies of CaO, BaO and PbO have also been studied in the present paper. The results showed that the total suppressing efficiencies of CaO, BaO and PbO increase with the increase of heated time and temperature.     

The degradation of endocrine disruptor di-n-butyl phthalate by UV irradiation: a photolysis and product study

The direct photolysis of an important endocrine disruptor compound, di-n-butyl phthalate (DBP), has been investigated under monochromatic UV irradiation at 254 nm over a wide pH range (3-11). The investigation was carried out under idealized conditions and has considered both reaction kinetics and the degradation mechanism. It was found that more than 90% of DBP can be degraded within an hour of irradiation in water. A simple model has been developed and used to predict the initial DBP photolysis rate constant at different pH values and initial DBP concentrations. The major decomposition mechanism of DBP is believed to involve the hydrolytic photolysis of the carbon in the alpha and/or beta-position of the ester chain with the production of aromatic carboxylic derivatives. Additionally, multi-degradation pathways are proposed for acid-catalyzed hydrolytic photolysis (pH 3-5), which was found to be useful in explaining the photo-degradation of DBP under acidic conditions. The use of 254 nm UV to photo-degrade DBP was found to be a relatively fast and clean process, especially in neutral to basic conditions.