Nitrophenols in precipitation

From 1995 to 1998 the concentrations of 4-nitrophenol, 2-methyl-4-nitrophenol, 3-methyl-4-nitrophenol, dinitro-ortho-cresol (DNOC) and 2,4-di-nitrophenol were measured monthly by HPLC in precipitation at eight different locations in Bavaria (Germany). Samples were collected by purpose-constructed computerised rainwater samplers which record electronically various sensor data each hour and adjust the sample temperature to 4 degrees C. The highest nitrophenol (NP) concentrations were measured for 4-NP. The median at all locations is higher than 1 microg/l. The median of the other NPs ranges between 0.2 and 0.8 microg/l. Considering the rain amounts the highest depositions were calculated for the regions Spessart, Bayerischer Wald and Chiemgauer Alpen. The median of 4-NP depositions extents to 200 microg/(month m2). The highest medians of the other NP depositions reach approximately 50 microg/(month m2).     

Forest fertilization with wood ash: effect on the distribution and storage of polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs)

Before wood ash can be safely used as a fertilizer in forests, possible negative effects such as input of organic contaminants or remobilization of contaminants already stored in the soil must be investigated. The objective of this study was to examine the effects of wood ash application on concentrations, storage, and distribution of polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) in a Swiss forest soil. In May 1998, we added 8 Mg wood ash ha(-1) to a forest soil. We determined 20 PAHs and 14 PCBs in the organic layer, in the bulk mineral soil, and in soil material taken from preferential flow paths and from the matrix before and after the wood ash application. In the control plots, the concentrations of PAHs in the organic layer indicated moderate pollution (sum of 20 PAHs: 0.8-1.6 mg kg(-1)), but sum of PCB concentrations was high (21-48 microLg kg(-1)). The wood ash had high concentrations of PAHs (sum of 20 PAHs: 16.8 mg kg(-1)), but low concentrations of PCBs (sum of 14 PCBs: 3.4 microg kg(-1)). The wood ash application increased the PAH concentrations in the organic horizons up to sixfold. In contrast, PCB concentrations did not change in the Oa horizon and decreased up to one third in the Oi and Oe horizons. The decrease was probably caused by the mobilization of stored PCBs because of the high pH of the wood ash. This probably results in a higher mobility of dissolved organic matter, acting as PCB carrier. In the mineral soil, the preferential flow paths of the A horizon contained more PAHs and PCBs (+20 +/- 15% and +43 +/- 60%, respectively) than the matrix. This was particularly true for higher molecular weight compounds (molecular weight > 200 g mol(-1)). Below 50 cm depth, concentrations of PAHs and PCBs were smaller in the preferential flow paths, suggesting that in deeper depths, processes acting as sinks dominated over inputs in the preferential flow paths.     

Anaerobic degradation of atrazine and metolachlor and metabolite formation in wetland soil and water microcosms

The half-lives, degradation rates, and metabolite formation patterns of atrazine (6-chloro-N2-ethyl-N4-isopropyl-1,3,5-triazine-2,4-diamine) and metolachlor [2-chloro-N-(2-ethyl-6-methylphenyl)-N-(2-methoxy-1-methylethyl) acetamide] were determined in an anaerobic wetland soil incubated at 24 degrees C for 112 d. At 0, 7, 14, 28, 42, 56, and 112 d, the soil and water were analyzed for atrazine and metolachlor, and their major metabolites. The soil oxidation-reduction potential reached -200 mV after 14 d. Degradation reaction rates were first-order for atrazine in anaerobic soil and for metolachlor in the aqueous phase. Zero-order reaction rates were best fit for atrazine in the aqueous phase and metolachlor in anaerobic soil. In anaerobic soil, the half-life was 38 d for atrazine and 62 d for metolachlor. In the aqueous phase above the soil, the half-life was 86 d for atrazine and 40 d for metolachlor. Metabolites detected in the anaerobic soil were hydroxyatrazine and deethylatrazine for atrazine, and relatively small amounts of ethanesulfonic acid and oxanilic acid for metolachlor. Metabolites detected in the aqueous phase above the soil were hydroxyatrazine, deethylatrazine, and deisopropylatrazine for atrazine, and ethanesulfonic acid and oxanilic acid for metolachlor. Concentrations of metabolites in the aqueous phase generally peaked within the first 25 d and then declined. Results indicate that atrazine and metolachlor can degrade under strongly reducing conditions found in wetland soils. Metolachlor metabolites, ethanesulfonic acid, and oxanilic acid are not significantly formed under anaerobic conditions.     

Thermal and energetic constraints on ectotherm abundance: a global test using lizards

Population densities of birds and mammals have been shown to decrease with body mass at approximately the same rate as metabolic rates increase, indicating that energetic needs constrain endotherm population densities. In ectotherms, the exponential increase of metabolic rate with body temperature suggests that environmental temperature may additionally constrain population densities. Here we test simple bioenergetic models for an ecologically important group of ectothermic vertebrates by examining 483 lizard populations. We find that lizard population densities decrease as a power law of body mass with a slope approximately inverse to the slope of the relationship between metabolic rates and body mass. Energy availability should limit population densities. As predicted, environmental productivity has a positive effect on lizard density, strengthening the relationship between lizard density and body mass. In contrast, the effect of environmental temperature is at most weak due to behavioral thermoregulation, thermal evolution, or the temperature dependence of ectotherm performance. Our results provide initial insights into how energy needs and availability differentially constrain ectotherm and endotherm density across broad spatial scales.     

Null model analysis of species nestedness patterns

Nestedness is a common biogeographic pattern in which small communities form proper subsets of large communities. However, the detection of nestedness in binary presence-absence matrices will be affected by both the metric used to quantify nestedness and the reference null distribution. In this study, we assessed the statistical performance of eight nestedness metrics and six null model algorithms. The metrics and algorithms were tested against a benchmark set of 200 random matrices and 200 nested matrices that were created by passive sampling. Many algorithms that have been used in nestedness studies are vulnerable to type I errors (falsely rejecting a true null hypothesis). The best-performing algorithm maintains fixed row and fixed column totals, but it is conservative and may not always detect nestedness when it is present. Among the eight indices, the popular matrix temperature metric did not have good statistical properties. Instead, the Brualdi and Sanderson discrepancy index and Cutler's index of unexpected presences performed best. When used with the fixed-fixed algorithm, these indices provide a conservative test for nestedness. Although previous studies have revealed a high frequency of nestedness, a reanalysis of 288 empirical matrices suggests that the true frequency of nested matrices is between 10% and 40%.     

Effects of land use on concentrations of metals in surface soils and ecological risk around Guanting Reservoir,China

It is accepted that the historical routine use of agrochemicals may have resulted in undesirable concentrations of metals in the environment. To investigate and assess the effects of land use on concentrations of heavy metals around the Guanting Reservoir in China, 52 surface soil samples (depth of 2–10 cm) were taken from areas where four types of land use were practiced (including arable land, woodland, bare land, orchard land). The metals and metalloids (As, Cr, Ni, Cu, Zn, Cd, and Pb) were analyzed using inductively coupled plasma-atomic emission spectroscopy (ICP-AES). Significant accumulation of As, Cd, and Cr was found in soils of arable land. Based on correlation and cluster analysis, it can be concluded that Cd and Zn originate mainly from phosphate fertilizer, Pb from the use of insecticides, fertilizers, and sewage sludge as well as air deposition, and Cu from copper-based fungicides, while As, Ni and Cr might come from parent soil material. According to an ecological risk analysis of metals based on the ecological index suggested by Hakanson, the four types of land can be ranked by severity of ecological risk as follows: arable land > woodland > bare land > orchard land, with a high ecological risk of Cd for all four types. Management measures for land use planners for avoiding water, soil, and sediment pollution caused by metals around the Guanting Reservoir are presented.     

SeaNine 211 as antifouling biocide: A coastal pollutant of emerging concern

SeaNine 211, with 4,5-dichloro-2-n-octyl-4-isothiazolin-3-one (DCOIT) being the biocidal ingredient, is a widely-used antifouling agent to deter the undesirable biofouling phenomenon. It is commercially promoted as an environmentally acceptable antifoulant mainly due to its claimed rapid degradation in marine environment. However, increasing researches document varying degradative kinetics in different environments, proving that SeaNine 211 is actually not degraded equally fast around the world (half-life between < 1 day and 13.1 days). Large-scale application of SeaNine 211 in antifouling coatings has also caused global contamination of marine environment in various compartments. For example, accumulation of SeaNine 211 is detected as high as 3700 ng/L in Spanish seawater and 281 ng/g dry weight in Korean sediment. Considering that SeaNine 211 is highly toxic against non-target marine organisms, environmental risk assessment finds that most marine organisms are endangered by SeaNine 211 in worst-case scenario. Its endocrine disrupting and reproductive impairing effects at environmentally worst-case concentrations further constitute a long-term threat to the maintenance of population stability. Therefore, in the light of the varying degradability, environmental pollution and high toxicity, especially the endocrine disruption, SeaNine 211 as an antifouling agent is likely to cause non-negligible damages to the marine ecosystem. There is an urgency to perform a systematic ecological risk assessment of SeaNine 211 to prevent the potential impacts on the health of marine environment. A regular monitoring also becomes necessary to place the usage of antifouling biocides under control.     

Chloramine demand estimation using surrogate chemical and microbiological parameters

A model is developed to enable estimation of chloramine demand in full scale drinking water supplies based on chemical and microbiological factors that affect chloramine decay rate via nonlinear regression analysis method. The model is based on organic character (specific ultraviolet absorbance (SUVA)) of the water samples and a laboratory measure of the microbiological (F m ) decay of chloramine. The applicability of the model for estimation of chloramine residual (and hence chloramine demand) was tested on several waters from different water treatment plants in Australia through statistical test analysis between the experimental and predicted data. Results showed that the model was able to simulate and estimate chloramine demand at various times in real drinking water systems. To elucidate the loss of chloramine over the wide variation of water quality used in this study, the model incorporates both the fast and slow chloramine decay pathways. The significance of estimated fast and slow decay rate constants as the kinetic parameters of the model for three water sources in Australia was discussed. It was found that with the same water source, the kinetic parameters remain the same. This modelling approach has the potential to be used by water treatment operators as a decision support tool in order to manage chloramine disinfection.     

Effect of template in MCM-41 on the adsorption of aniline from aqueous solution

The effect of the surfactant template cetyltrimethylammonium bromide (CTAB) in MCM-41 on the adsorption of aniline was investigated. Various MCM-41 samples were prepared by controlling template removal using an extraction method. The samples were then used as adsorbents for the removal of aniline from aqueous solution. The results showed that the MCM-41 samples with the template partially removed (denoted as C-MCM-41) exhibited better adsorption performance than MCM-41 with the template completely removed (denoted as MCM-41). The reason for this difference may be that the C-MCM-41 samples had stronger hydrophobic properties and selectivity for aniline because of the presence of the template. The porosity and cationic sites generated by the template play an important role in the adsorption process. The optimal adsorbent with moderate template was achieved by changing the ratio of extractant; it has the potential for promising applications in the field of water pollution control.     

Factors influencing private and public environmental protection behaviors: results from a survey of residents in Shaanxi, China

Currently one of the largest and most rapidly developing countries, China also has some of the world's most severe environmental problems. China will most likely need to use all of the potential major strategies currently available to solve the country's huge environmental challenges, including promoting individual conservation behavior through educational campaigns and encouraging public environmental advocacy. This paper summarized the findings of a survey of 347 residents of Shaanxi province on environmental attitudes and behaviors. The survey found generally high levels of environmental knowledge and high recognition of the seriousness of environmental issues, moderate levels of individual actions supporting environmental resource conservation and low levels of public environmental behaviors, particularly for organized public advocacy. Further analysis indicated that the perceived importance of environmental protection is the most important factor influencing individual environmental resource conservation, but not public advocacy behaviors. Implications for environmental campaigns are discussed.