Impact of biogenic emission uncertainties on the simulated response of ozone and fine particulate matter to anthropogenic emission reductions

The role of emissions of volatile organic compounds and nitric oxide from biogenic sources is becoming increasingly important in regulatory air quality modeling as levels of anthropogenic emissions continue to decrease and stricter health-based air quality standards are being adopted. However, considerable uncertainties still exist in the current estimation methodologies for biogenic emissions. The impact of these uncertainties on ozone and fine particulate matter (PM2.5) levels for the eastern United States was studied, focusing on biogenic emissions estimates from two commonly used biogenic emission models, the Model of Emissions of Gases and Aerosols from Nature (MEGAN) and the Biogenic Emissions Inventory System (BEIS). Photochemical grid modeling simulations were performed for two scenarios: one reflecting present day conditions and the other reflecting a hypothetical future year with reductions in emissions of anthropogenic oxides of nitrogen (NOx). For ozone, the use of MEGAN emissions resulted in a higher ozone response to hypothetical anthropogenic NOx emission reductions compared with BEIS. Applying the current U.S. Environmental Protection Agency guidance on regulatory air quality modeling in conjunction with typical maximum ozone concentrations, the differences in estimated future year ozone design values (DVF) stemming from differences in biogenic emissions estimates were on the order of 4 parts per billion (ppb), corresponding to approximately 5% of the daily maximum 8-hr ozone National Ambient Air Quality Standard (NAAQS) of 75 ppb. For PM2.5, the differences were 0.1-0.25 microg/m3 in the summer total organic mass component of DVFs, corresponding to approximately 1-2% of the value of the annual PM2.5 NAAQS of 15 microg/m3. Spatial variations in the ozone and PM2.5 differences also reveal that the impacts of different biogenic emission estimates on ozone and PM2.5 levels are dependent on ambient levels of anthropogenic emissions.     

Anammox: an option for ammonium removal in bioreactor landfills

Experiments carried out in bioreactor landfill simulators demonstrated that more than 40% of the total N was transferred into the liquid and gas phases during the incubation period of 380 days. Ammonium, an end product of protein degradation and important parameter to consider during landfill closure, tends to accumulate up to inhibitory levels in the leachate of landfills especially in landfills with leachate recirculation. Most efforts to remove ammonium from leachate have been focused on ex situ and partial in situ methods such as nitrification, denitrification and chemical precipitation. Besides minimal contributions from other N-removal processes, Anammox (Anaerobic Ammonium Oxidation) bacteria were found to be active within the simulators. Anammox is considered to be an important contributor to remove N from the solid matrix. However, it was unclear how the necessary nitrite for Anammox metabolism was produced. Moreover, little is known about the nature of residual nitrogen in the waste mass and possible mechanisms to remove it. Intrusion of small quantities of O₂ is not only beneficial for the degradation process of municipal solid waste (MSW) in bioreactor landfills but also significant for the development of the Anammox bacteria that contributed to the removal of ammonium. Volatilisation and Anammox activity were the main N removal mechanisms in these pilot-scale simulators. The results of these experiments bring new insights on the behaviour, evolution and fate of nitrogen from solid waste and present the first evidence of the existence of Anammox activity in bioreactor landfill simulators.     

Agricultural reuse of the digestate from low-cost tubular digesters in rural Andean communities

This research aimed at assessing the properties of guinea pig manure digestate from low-cost tubular digesters for crops fertilization in rural Andean communities. To this end, field trials were carried out to evaluate the effect of the digestate on two common Andean crops: potato (Solanum tuberosum) and forage (Lolium multiflorum and Trifolium pratense L.). The potato yield (20-25 tha(-1)) increased by 27.5% with digestate, by 15.1% with pre-compost and by 10.3% with the mixture, compared to the control. The forage yield (20-21 tha(-1)) increased by 1.4% with digestate - 50% dose, and by 8.8% with digestate - 100% dose and digestate - 150% dose, compared to the control. The results suggest that the digestate is an appropriate substitute of manure pre-compost for potato fertilization. The results with forage indicate that it can be applied in a range of doses, according to the amount produced by the digester. Currently, manure is either used for cooking or as fertilizer. With low-cost tubular digesters implementation, it could be used to feed the digester, using the digestate for crops fertilization and biogas for cooking; improving household living conditions and protecting the environment. Since soil properties in rural Andean communities differ from experimental layouts, the effect of fertilizers should be re-evaluated in-situ in future research studies.     

Energy efficiency of substance and energy recovery of selected waste fractions

In order to reduce the ecological impact of resource exploitation, the EU calls for sustainable options to increase the efficiency and productivity of the utilization of natural resources. This target can only be achieved by considering resource recovery from waste comprehensively. However, waste management measures have to be investigated critically and all aspects of substance-related recycling and energy recovery have to be carefully balanced. This article compares recovery methods for selected waste fractions with regard to their energy efficiency.Whether material recycling or energy recovery is the most energy efficient solution, is a question of particular relevance with regard to the following waste fractions: paper and cardboard, plastics and biowaste and also indirectly metals. For the described material categories material recycling has advantages compared to energy recovery. In accordance with the improved energy efficiency of substance opposed to energy recovery, substance-related recycling causes lower emissions of green house gases.For the fractions paper and cardboard, plastics, biowaste and metals it becomes apparent, that intensification of the separate collection systems in combination with a more intensive use of sorting technologies can increase the extent of material recycling. Collection and sorting systems must be coordinated. The objective of the overall system must be to achieve an optimum of the highest possible recovery rates in combination with a high quality of recyclables.The energy efficiency of substance related recycling of biowaste can be increased by intensifying the use of anaerobic technologies. In order to increase the energy efficiency of the overall system, the energy efficiencies of energy recovery plants must be increased so that the waste unsuitable for substance recycling is recycled or treated with the highest possible energy yield.     

An empirical investigation of construction and demolition waste generation rates in Shenzhen city, South China

The construction and demolition waste generation rates (C&D WGRs) is an important factor in decision-making and management of material waste in any construction site. The present study investigated WGRs by conducting on-site waste sorting and weighing in four ongoing construction projects in Shenzhen city of South China. The results revealed that WGRs ranged from 3.275 to 8.791 kg/m² and miscellaneous waste, timber for formwork and falsework, and concrete were the three largest components amongst the generated waste. Based on the WGRs derived from the research, the paper also discussed the main causes of waste in the construction industry and attempted to connect waste generation with specific construction practices. It was recommended that measures mainly including performing waste sorting at source, employing skilful workers, uploading and storing materials properly, promoting waste management capacity, replacing current timber formwork with metal formwork and launching an incentive reward program to encourage waste reduction could be potential solutions to reducing current WGRs in Shenzhen. Although these results were derived from a relatively small sample and so cannot justifiably be generalized, they do however add to the body of knowledge that is currently available for understanding the status of the art of C&D waste management in China.     

A framework for understanding waste management studies in construction

During the past decades, construction and demolition (C&D) waste issues have received increasing attention from both practitioners and researchers around the world. A plethora of research relating to C&D waste management (WM) has been published in scholarly journals. However, a comprehensive understanding of the C&D WM research is somehow absent in spite of its proliferation. The aim of this paper is to develop a framework that helps readers understand the C&D WM research as archived in selected journals. Papers under the topic of C&D WM are retrieved based on a set of rigorous procedures. The information of these papers is then analyzed with the assistance of the Qualitative Social Research (QSR) software package NVivo. A framework for understanding C&D WM research is created based on the analytic results. By following the framework, a bibliometric analysis of research in C&D WM is presented, followed by an in-depth literature analysis. It is found that C&D generation, reduction, and recycling are the three major topics in the discipline of C&D WM. Future research is recommended to (a) investigate C&D waste issues in wider scopes including design, maintenance and demolition, (b) develop a unified measurement for waste generation so that WM performance can be compared across various economies, and (c) enhance effectiveness of WM approaches (e.g. waste charging scheme) based on new WM concepts (e.g. Extended Producer Responsibility). In addition to the above research findings, the approach for producing the research framework can be useful references for other studies which attempt to understand the research of a given discipline.     

Effect of aeration modes on the characteristics of composting emissions and the NH3 removal efficiency by using biotrickling filter

A pilot biotrickling filter (BTF) packed with ZX02 fibrous balls as packing material was tested for the treatment of ammonia (NH₃) released from a composting plant of dairy manure. In order to investigate the effects of three compost aeration modes (mode Co-I, Co-II and In-II) on the NH₃ removal efficiency, a field experiment was continuously carried out for more than eight months. The results demonstrated that under the intermittent aeration mode (In-II), the NH₃ removal efficiency reached 99.2 ± 0.1% when the inlet NH₃ concentration was 7.5-32.3 mg m⁻³ (9.8-42.5 ppmv). The maximum and critical elimination capacity of the biotrickling filter was 22.6 and 4.9 g NH₃ m⁻³ h⁻¹, respectively. The effluent concentration of NH₃ was lower than 1.0 mg m⁻³, which meets the first class discharge standards of GB14554-93. When the concentration of free ammonia in the trickling liquid was varied from 0.1 to 0.4 mg L⁻¹, the nitrification yield was between 47.9% and 103.8%. In addition, the optimum liquid tricking velocity (LTV) of the biotrickling filter was 0.5 m³ m⁻² h⁻¹ for low inlet concentrations and 2.2 m³ m⁻² h⁻¹ for high inlet concentrations. Therefore, the use of the biotrickling filter for the compost under the third aeration mode (In-II) yielded an effective optimum NH₃ removal and reduced the nitrogen loss in the compost.     

Can Labor Out-Migration Reduce Firewood Consumption by Rural Households in Western Mountainous China

The relationship between out-migration of labor in the Qinling mountain area and households’ firewood consumption is explored. Migration and remittances reduce households’ firewood consumption due to increases in both income and opportunity cost of firewood collection. Previous studies have been equivocal because they ignored uncertainty in household economy, which is widespread in forest areas of less developed countries. This study provides additional insight by considering vulnerability and subjective assessment of poverty generated by unstable income and an uncertain future. We provide evidence that the amount of firewood consumed depends on income and opportunity cost of firewood collection, but also on a prudent consumption strategy, due to farmers’ subjective assessment of their future possible poverty. We also find out-migration of labor can reduce per capita firewood consumption but subjective poverty also acts against reduction of firewood consumption.     

Contamination and emission factors of PCDD/Fs, unintentional PCBs, HxCBz, PeCBz and polychlorophenols in chloranil in China

The production of chloranil is regarded as a potentially significant source of unintentional POPs. This research aimed to identify the contamination levels of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs), hexachlorobenzene (HxCBz), pentachlorobenzene (PeCBz) and polychlorophenols in chloranil samples and identify the formation pathways. The toxicity equivalent (TEQ) values for PCDD/Fs in the chloranil samples ranged from 163 to 1 540 200 pg I-TEQ g⁻¹, while the PCB TEQ values ranged from 1.9 to 3.3 pg WHO-TEQ g⁻¹. High levels of HxCBz, PeCBz and polychlorophenols were also detected in the chloranil samples. The average emission factors were 522.2 mg I-TEQ t⁻¹ (PCDD/Fs), 0.0026 mg WHO-TEQ t⁻¹ (PCBs), 32.6 mg t⁻¹ (HxCBz), and 136.6 mg t⁻¹ (PeCBz). The PCDD/Fs and PCBs are thought to be formed from the polychlorophenols and polychlorobenzenes generated during the chloranil production process. Purification of the chloranil products can reduce the unintentional POPs releases and protect the environment.