Development of a procedure for sustainable in situ aquifer denitrification

Denitrification experiments have provided data showing the pitfalls and successes in developing a sustainable injection/extraction system in a sand and gravel aquifer. Experiments increase in complexity from continuous injection at one well to automated‐pulsed eight well injections. In both continuous and pulsed injection of organic carbon, 40 mg NO_3‐N l^?1 was reduced below the detection limit of < 0.1 mg NO_3‐N l^?1 in the denitrification zones. Under continuous injection, accumulation of bacterial exudates in the vicinity of the injection well resulted in injection well clogging within ten days. Periodic cleaning of the injection well and the adjacent gravel matrix was accomplished by using a tool developed to circulate a cleaning solution composed of 5 percent H₂O₂ and 0.02 percent NaOCl; but, biofouling could not be eliminated. In the later experiments, acetate became the carbon amendment because ethanol promoted more biomass development. A specialized pulse injection procedure was developed to separate nitrate from acetate‐C and was successful in alleviating the proliferation of bacterial exudates without affecting the performance of the denitrification system. Using pulsed injection, a maximum of 72 percent nitrate reduction was accomplished in the extraction well water, and denitrification was sustained for three months without clogging. © 2003 Wiley Periodicals, Inc.     

Mobility control: How injected surfactants and biostimulants may be forced into low‐permeability units

Recovering dense nonaqueous‐phase liquid (DNAPL) remains one of the most difficult problems facing the remediation industry. Still, the most common method of recovering DNAPL is to physically remove the contaminants using common technologies such as total fluids recovery pumps, vacuum systems, and “pump‐and‐treat.” Increased DNAPL removal can be attained using surfactants to mobilize and/or solubilize the pollutants. However, very little is understood of the methods developed by petroleum engineers beginning in the 1960s to overcome by‐passed, low‐permeability zones in heterogeneous oil reservoirs. By injecting or causing the formation of viscous fluids in the subsurface, petroleum engineers caused increased in‐situ pressures that forced fluid flow into low permeability units as well as the higher permeability thief zones. Polymer flooding involves injecting a viscous aqueous polymer solution into the contaminated aquifer. Foam flooding involves injecting surfactant to decontaminate the high‐permeability zones and then periodic pulses of air to cause a temporary viscous foam to form in the high‐permeable zones after all DNAPL is removed. Later surfactant pulses are directed by the foam into unswept low‐permeable units. These methods have been applied to DNAPL removal using surfactants but they can also be applied to the injection of bio‐amendments into low‐permeability zones still requiring continued remediation. Here we discuss the principles of mobility control as practiced in an alluvial aquifer contaminated with chlorinated solvent and coal tar DNAPLs as well as some field results. © 2003 Wiley Periodicals, Inc.     

The use of enhanced bioremediation at the Savannah River Site to remediate pesticides and PCBs

Enhanced bioremediation is quickly developing into an economical and viable technology for the remediation of contaminated soils. Until recently, chlorinated organic compounds have proven difficult to bioremediate. Environmentally recalcitrant compounds, such as polychlorinated biphenyls (PCBs) and persistent organic pesticides (POPs) such as dichlorodiphenyl trichloroethane (DDT) have shown to be especially arduous to bioremediate. Recent advances in field‐scale bioremedial applications have indicated that biodegradation of these compounds may be possible. Engineers and scientists at the Savannah River Site (SRS), a major DOE installation near Aiken, South Carolina, are using enhanced bioremediation to remediate soils contaminated with pesticides (DDT and its metabolites, heptachlor epoxide, dieldrin, and endrin) and PCBs. This article reviews the ongoing remediation occurring at the Chemicals, Metals, and Pesticides (CMP) Pits using windrow turners to facilitate microbial degradation of certain pesticides and PCBs. © 2003 Wiley Periodicals, Inc.     

Local Environmental Investments and Sustainable Development: the evaluation of environmental projects in Scotland supported by the European Agriculture Guidance and Guarantee Fund

In the UK for the period 1994-99, a broad range of environmental projects were given financial support through the European Agriculture Guidance and Guarantee Fund under the Objective 1 and Objective 5b programmes. This paper is concerned with the ex-post evaluation of these projects set within a Sustainable Development framework. The aim was to identify project types or characteristics that offered the greatest return on investment. A classification of six broad project types was adopted. The evaluation revealed that there were significant differences between individual projects with respect to the type and scale, and temporal and social distribution of the benefits they delivered. In particular, as well as delivering environmental and economic benefits, many projects made a significant contribution to the development of human and social capital. The paper concludes that it is possible to improve the basis for future project selection in order to maximise the returns on environmental investments in the context of sustainable development.     

Societal Concerns about Pork and Pork Production and Their Relationships to the Production System

Pork producers in Western Europe moreand more encounter a variety of societalconcerns about pork and pork production. Sofar, however, producers predominantly focusedon low consumer prices, therewith addressingjust one concern. This resulted in an intensiveand large-scale production system, decreasinglyrelated to the area of farm land, andaccompanied with increasing concerns aboutsafety and healthiness of pork, animal welfare,environmental pollution, and others.An overview was given of possible concernsabout West-European pork production with theconsumers, citizens, and producers, and thoseconcerns are traced back to the pork productionsystem. The various kinds and qualities ofinformation about the pork production system onwhich possible concerns are based have beenworked out extensively in this paper. Knowledgeabout the aspects of pork production that cangive rise to concerns can be used in two ways.First, the communication about those aspectstowards consumers and citizens can be adjustedor extended to give them better possibilitiesto make food choices or to develop their ownopinions about pork production. Second,producers could change the pork productionsystem such that it better satisfies consumersand citizens. Such adaptations are wellpossible, as three pork quality schemes, whichhave been evaluated, illustrate. However, mostof these adaptations can only be carried out atthe cost of the present low consumer prices andwill not occur spontaneously on a large scale.Therefore, accounting for the type andrelevance of the concerns, legislation isnecessary to address societal concerns in abalanced way such that pork production systemsbecome acceptable for the majority of oursociety.     

USE OF STAGE DATA TO CHARACTERIZE HYDROLOGIC CONDITIONS IN AN URBANIZING ENVIRONMENT1

ABSTRACT: This paper presents the results of a study on the use of continuous stage data to describe the relation between urban development and three aspects of hydrologic condition that are thought to influence stream ecosystems—overall stage variability, stream flashiness, and the duration of extreme‐stage conditions. This relation is examined using data from more than 70 watersheds in three contrasting environmental settings—the humid Northeast (the metropolitan Boston, Massachusetts, area); the very humid Southeast (the metropolitan Birmingham, Alabama, area); and the semiarid West (the metropolitan Salt Lake City, Utah, area). Results from the Birmingham and Boston studies provide evidence linking increased urbanization with stream flashiness. Fragmentation of developed land cover patches appears to ameliorate the effects of urbanization on overall variability and flashiness. There was less success in relating urbanization and streamflow conditions in the Salt Lake City study. A related investigation of six North Carolina sites with long term discharge and stage data indicated that hydrologic condition metrics developed using continuous stage data are comparable to flow based metrics, particularly for stream flashiness measures.     

Factor structure of the transformational leadership model in human service teams

The purpose of this study was to examine the factor structure of the transformational leadership model in human service teams. As the nature of this work environment mandates certain management‐by‐exception practices, patterns of correlations between perceptions of active and passive management‐by‐exception behaviors and transformational, transactional, and laissez‐faire leadership were of interest. 236 leaders and 620 subordinates from 54 mental health teams completed the Multifactor Leadership Questionnaire, form 8Y. Results suggest that active and passive management‐by‐exception factors are independent constructs. Copyright © 2003 John Wiley & Sons, Ltd.     

Regional Variations in the Implementation of the Local Air Quality Management Process within Great Britain

The UK National Air Quality Strategy has required local authorities to review and assess air quality in their area of jurisdiction and determine locations in their areas where concentrations of specific air quality pollutants are predicted to exceed national air quality objectives in the future. Statutory air quality management areas (AQMAs) are designated where air quality is predicted to be above specified objective concentrations by specific target dates, and statutory air quality action plans will be necessary to improve the local air quality within these areas. Over 124 local authorities in England (including London), Wales and Scotland anticipate declaring AQMAs following the conclusion of the statutory air quality review and assessment process. However, other influences are being exerted on the local air quality management process and AQMA decision-making processes. Such influences include regional and sub- regional collaborative working between local authorities and government agencies and wider political decision-making processes. Some regions of Great Britain (encompassing England (including London), Scotland and Wales) anticipate many AQMA designations, whilst other regions are not anticipating any such designations despite apparently similar air quality circumstances. Evidence for regional or sub-regional variations in the locations of anticipated AQMAs are examined through an evaluation of the outcomes of the scientific review and assessment process undertaken by local authorities declaring AQMAs, and through a local authority survey to identify influences on decision-making processes at a level above that of the local authority. Regional variation is reported in the type of pollutant causing AQMAs to be declared, in the numbers of AQMAs in regions and in the spatial distribution of AQMAs across Great Britain.