Laboratory evaluation of thermophilic-anaerobic digestion to produce Class A biosolids. 1. Stabilization performance of a continuous-flow reactor at low residence time.

There is increasing interest in the United States in producing biosolids from municipal wastewater treatment that meet the criteria for Class A designation established by the U.S. Environmental Protection Agency. Class A biosolids are intended to be free of pathogens and also must meet requirements for reduction of the vector-attraction potential associated with untreated sludge. High-temperature processes are considered to produce Class A biosolids if the combination of operating temperature and treatment time exceeds minimum criteria, but this option is not applicable to mixed, continuous-flow reactors. Such reactors, or any combination of reactors that does not meet the holding time requirement at a specific temperature, must be demonstrated to inactivate pathogens to levels consistent with the Class A criteria. This study was designed to evaluate pathogen inactivation by thermophilic anaerobic digestion in a mixed, continuous-flow reactor followed by batch or plug-flow treatment. In this first of a two-part series, we describe the performance of a continuous-flow laboratory reactor with respect to physical and chemical operating parameters; microbial inactivation in the combined continuous-flow and batch treatment system is described in the second part. Sludges from three different sources were treated at 53 degrees C, while sludge from one of the sources was also treated at 55 and 51 degrees C. Relatively short hydraulic retention times (four to six days) were used to represent a conservative operating condition with respect to pathogen inactivation. Treatment of a fermented primary sludge led to an average volatile-solids (VS) destruction efficiency of 45%, while VS destruction for the other two sources was near or below 38%, the Class A criterion for vector attraction reduction. Consistent with other studies on thermophilic anaerobic digestion of sludges at short residence times, effluent concentrations of volatile fatty acids (VFAs) were relatively high. Also consistent with other studies, the most abundant VFA in the effluent was propionate. Gas production ranged from 0.3 to 0.5 m3/kg VS fed and from 0.8 to 1.3 m3/kg VS destroyed.     

Laboratory evaluation of thermophilic-anaerobic digestion to produce Class A biosolids. 2. Inactivation of pathogens and indicator organisms in a continuous-flow reactor followed by batch treatment.

Thermophilic-anaerobic digestion in a single-stage, mixed, continuous-flow reactor is not approved in the United States as a process capable of producing Class A biosolids for land application. This study was designed to evaluate the inactivation of pathogens and indicator organisms in such a reactor followed by batch treatment in a smaller reactor. The combined process was evaluated at 53 degrees C with sludges from three different sources and at 51 and 55 degrees C with sludge from one of the sources. Feed sludge to the continuous-flow reactor was spiked with the pathogen surrogates Ascaris suum and vaccine-strain poliovirus. Feed and effluent were analyzed for these organisms and for indigenous Salmonella spp., fecal coliforms, Clostridium perfringens spores, and somatic and male-specific coliphages. No viable Ascaris eggs were observed in the effluent from the continuous reactor at 53 or 55 degrees C, with greater than 2-log removals across the digester in all cases. Approximately 2-log removal was observed at 51 degrees C, but all samples of effluent biosolids contained at least one viable Ascaris egg at 51 degrees C. No viable poliovirus was found in the digester effluent at any of the operating conditions, and viable Salmonella spp. were measured in the digester effluent in only one sample throughout the study. The ability of the continuous reactor to remove fecal coliforms to below the Class A monitoring limit depended on the concentration in the feed sludge. There was no significant removal of Clostridium perfringens across the continuous reactor under any condition, and there also was limited removal of somatic coliphages. The removal of male-specific coliphages across the continuous reactor appeared to be related to temperature. Overall, at least one of the Class A pathogen criteria or the fecal coliform limit was exceeded in at least one sample in the continuous-reactor effluent at each temperature. Over the range of temperatures evaluated, the maximum time required to meet the Class A criteria by batch treatment of the continuous-reactor effluent was 1 hour for Ascaris suum and Salmonella spp. and 2 hours for fecal coliforms.     

Treatment of chlorinated solvents by TiO2 photocatalysis and photo-Fenton: influence of operating conditions in a solar pilot plant

Titanium dioxide photocatalysis (using 20 0mg l(-1) of TiO2), under aerobic and anaerobic conditions, and photo-Fenton (2 and 56 mg l(-1) iron) were applied to the treatment of different NBCS (non-biodegradable chlorinated solvents), such as dichloroethane, dichloromethane and trichloromethane dissolved in water at 50 mg l(-1). All the tests were performed in a 35-l solar pilot plant with compound parabolic collectors (CPCs) under natural illumination. The two solar treatments were compared with attention to chloride release and TOC mineralisation, as the main parameters. Photo-Fenton was found to be the more appropriate treatment for these compounds, assuming volatilisation as a drawback of photocatalytic degradation of NBCS dissolved in water. In this context, several operating parameters related to NBCS degradation, e.g., treatment time, temperature, hydrogen peroxide consumption and volatility of parent compounds are discussed. The correct choice of operating conditions can very often diminish the problem of volatilisation during treatment.     

Occurrence and behavior of wastewater indicators in the Santa Ana River and the underlying aquifers.

The occurrence and behavior of wastewater indicator compounds in the Santa Ana River (SAR) water and the underlying aquifer recharged by the SAR has been studied. The SAR contains a high proportion of tertiary treated wastewater effluents, up to 100% during summer and fall. The following water quality parameters were quantified: four specific wastewater indicator compounds, ethylene diaminetetraacetic acid (EDTA), nitrilotriacetic acid (NTA), a naphthalene dicarboxylate (NDC) isomer, alkylphenol polyethoxy carboxylates (APECs), and selected haloacetic acids (HAAs), nitrate, dissolved oxygen (DO), DOC, total carbohydrate, and phenolic substances. Statistical analysis indicated that normal distribution was adequate to describe the probability distribution of the constituents in most cases. In the river, the concentrations of wastewater indicator compounds decreased as the fraction of storm runoff increased. EDTA and NDC were detected in a monitoring well near the river and in two production wells 1.8 and 2.7 km down gradient with little apparent attenuation. By contrast, NTA, APECs, bromochloro- and dibromoacetic acids appeared to be attenuated significantly during infiltration of river water and groundwater transport.     

Algal-bacterial interactions in metal contaminated floodplain sediments

The aim of the present study was to investigate algal-bacterial interactions in a gradient of metal contaminated natural sediments. By means of multivariate techniques, we related the genetic structure (denaturing gradient gel electrophoresis, DGGE) and the physiological structure (community-level physiological profiling, CLPP) of the bacterial communities to the species composition of the algal communities and to the abiotic environmental variables, including metal contamination. The results revealed that genetic and physiological structure of the bacterial communities correlated with the species composition of the algal community, but hardly to the level of metal pollution. This must be interpreted as an indication for a strong and species-specific linkage of algal and bacterial species in floodplain sediments. Metals were, however, not proven to affect either the algal or the bacterial communities of the Dutch river floodplains.     

大空间火灾烟气流动的动态显示研究

讨论了火灾烟气流动过程的计算机动态模拟方法。利用Ｄｅｌｐｈｉ可视化编程工具,建立了一个融区域模拟计算和计算机动态显示于一体的火灾发展的模拟软件,并以中国科技大学的大空间建筑火灾实验厅为对象,对典型火灾羽流及烟气层的发展过程进行了动态显示。     

Information processing style and decision making

Information processing style, often termed cognitive style, has gained prominence in the organizational behavior literature as researchers use it as a basis for studying decision making behavior, conflict, strategy development, and group processes. However, the many operational definitions and measures of cognitive style have produced inconsistent and confusing results. This study tested the interrelationship among four measures of this construct: the Myers–Briggs Type Indicator, the Group Embedded Figures Test, the Learning Styles Inventory, and the Decision Style Inventory. Measures that appeared to be conceptually linked through their underlying theories were compared. Results indicate that the various measures are not strongly interrelated and appear to be measuring different aspects of information processing and decision making. Copyright © 1999 John Wiley & Sons, Ltd.     

Modulation of fossil fuel production by global temperature variations

An analysis of the fossil fuel production record since 1860 shows that the exponential growth in production is modulated in the inverse sense by variations in global average temperature. Taking this modulation into account shows that the underlying rate of increase is about 25% less than the widely quoted 4.3% annual rate. This modulation may also produce a partially ameliorating feedback if the often predicted carbon dioxide greenhouse effect actually materializes.     

Threshold and dose response estimation using the “filter model”

The “filter model” has been developed to explain the biologic effects of radiation and chemicals. We have examined nearly 300 sets of dose response data, of which 50 are presented here. Responses (induced by radiation and chemicals) which have been examined include in vitro survival studies on animal and plant tissues, induction of cellular aberrations and time to tumor or death. Similar data from in vivo studies has also been examined. All of the data appear to fit the model R = a lnD + b(lnD)² + c, where R is the response, a and b are parameters fitted by regression to a particular set of data, and c is the response at zero (or lowest) dose. By writing this model in exponential form, it can be seen that the response R results from multistage filtering (by net amounts a and b) of the initial dose, D. The threshold is obtained from this model as the point, $\text{D}\text{?}{}_{\mathrm{T}}$, at which the second derivative becomes zero. This is given by $\text{D}\text{?}{}_{\mathrm{T}}\text{=}\text{exp}\text{(1 ?}\text{a}\text{2b}\text{)}$ when a and b are oppositelt signed.