Comparison of Air Pollutant Emissions from Vaporizing and Air Atomizing Waste Oil Heaters

Information presented in this paper is directed to individuals concerned with emissions from combustion of waste crankcase oil for space heating. Studies were performed to characterize gaseous and particulate emissions and vaporizing pot solid residues resulting from the combustion of waste crankcase oil. Two types of waste oil burners were tested. One was a vaporizing oil burner rated at 35.2 kW (120,000 Btu/h heat input), and the other was an air atomizing oil burner rated at 73.3 kW (250,000 Btu/h heat input). Except for NO_X and SO_X, gaseous emissions were similar to those from conventional distillate oil combustion. NO_X and SO_X emissions were higher due to higher fuel nitrogen and sulfur concentrations. Waste oil from automotive use showed higher inorganic levels than crankcase oil used for truck engine lubrication. Both burner types discharged high levels of metallic species, but the air atomizing unit had much higher stack emission levels than did the vaporizing pot system. Also, particulate loading levels were an order of magnitude higher for the air atomizing burner than for the vaporizing pot burner when firing the waste oils. However, the vaporizing pot burner generated a waste residue containing the majority of its elemental emissions. Elements which exceeded threshold limit values for one or both heaters were cadmium, chromium, cobalt, copper, iron, lead, nickel, phosphorus, and zinc. However, the nickel and much of chromium appeared to be a sampling artifact caused by the stainless steel sampling system.     

Evaluation of Selected Gaseous Halocarbons for Use in source Test Performance Audits

A repository of 38 gaseous organic compounds in compressed gas cylinders has been established by EPA. This repository was established to provide standards for source test performance audits, that is, quantitative quality assurance tests. Among these compounds are ten halogenated organic species, which are the focus of this paper.

Stability studies of all ten compounds have been performed to determine the feasibility of using them as performance audit standards. Results indicate that all of the halocarbons tested are adequately stable to be used as reliable audit standards.

Subsequent to completion of stability studies, four of the ten halocarbons were used in source test performance audits. Results are available at this time for two of the four compounds; the results show agreement within 10% of the concentrations previously established by Research Triangle Institute.     

The Relationship between Cross-Sectional and Time Series Studies

Abstract

There is a dearth of information on dust emissions from sources that are unique to the U.S. Department of Defense testing and training activities. However, accurate emissions factors are needed for these sources so that military installations can prepare accurate particulate matter (PM) emission inventories. One such source, coarse and fine PM (PM₁₀ and PM_2.5) emissions from artillery backblast testing on improved gun positions, was characterized at the Yuma Proving Ground near Yuma, AZ, in October 2005. Fugitive emissions are created by the shockwave from artillery pieces, which ejects dust from the surface on which the artillery is resting. Other contributions of PM can be attributed to the combustion of the propellants. For a 155–mm howitzer firing a range of propellant charges or zones, amounts of emitted PM₁₀ ranged from ～19 g of PM₁₀ per firing event for a zone 1 charge to 92 g of PM₁₀ per firing event for a zone 5. The corresponding rates for PM_2.5 were ～9 g of PM_2.5 and 49 g of PM_2.5 per firing. The average measured emission rates for PM₁₀ and PM_2.5 appear to scale with the zone charge value. The measurements show that the estimated annual contributions of PM₁₀ (52.2 t) and PM_2.5 (28.5 t) from artillery backblast are insignificant in the context of the 2002 U.S. Environment Protection Agency (EPA) PM emission inventory. Using national–level activity data for artillery fire, the most conservative estimate is that backblast would contribute the equivalent of 5 x 10^–4% and 1.6 x 10^–3% of the annual total PM₁₀ and PM_2.5 fugitive dust contributions, respectively, based on 2002 EPA inventory data.     

Treatment Technologies For Hazardous Wastes: Part IV A Review of Alternative Treatment Processes for Metal Bearing Hazardous Waste Streams

The U.S. Congress and the U.S. Environmental Protection Agency believe that treatment and recovery techniques should be given maximum priority when considering methods for managing the nation's generated hazardous waste. A prohibition for the disposal of certain categories of hazardous wastes either directly onto or into the land without being treated to an accepted degree prior to such disposal practice has been promulgated.¹ Wastes containing toxic metals and cyanide complexes have been selected as a group to be restricted. Due to the high generation rate associated with this category, a large capacity of waste treatment processing will be required. Existing and emerging treatment alternatives which are or have the potential to be employed for waste treatment of metal bearing wastes are presented in this paper.     

Glutamine synthetase and protease enzyme activities and growth response of ruminal bacterium Prevotella ruminicola strain B14 to nitrogen source and concentration

Abstract

The objective of this study was to determine the effects of varying nitrogen sources and concentrations upon glutamine synthetase and protease activities in Prevotella ruminicola strain B₁4. Based on growth response it appears that ammonium chloride or pepticase limited P. ruminicola becomes nitrogen limited when nitrogen concentration is at 0.5 mM. However, when casein was provided as the sole source of nitrogen P. ruminicola becomes nitrogen limited at 2.5 mM. Glutamine synthetase activity was measured from mid‐log phase cells grown in either nitrogen‐limited or non‐limited conditions. No activity was detectable in the non‐limited treatments. However, in the N‐ limited treatments, pepticase had the highest activity (20.76 units), followed by ammonium chloride (18.72 units) and casein (14.42 units). Protease activity assays indicated that nitrogen‐limited cultures had higher proteolytic activity than non‐limited cultures. Moreover, these activities appeared to follow the same response pattern as the previously observed glutamine synthetase activities. The results of this study indicate that P. ruminicola strain B, 4 protease activity may be influenced by nitrogen concentration such that activity increases when nitrogen availability decreases.     

Growth Inhibition by Nitrocompounds of Selected Uric Acid-Utilizing Microorganisms Isolated from Poultry Manure

The overall objective of this study was to evaluate the potential ability of nitrocompounds to reduce ammonia volatilization by inhibiting uric acid–utilizing microorganisms. Experiment I was conducted to evaluate the effects of nitrocompounds on the growth of uric acid–utilizing microorganisms isolated from poultry manure during six-hour incubation. There were five treatments: (1) control, (2) 50 mM nitroethane, (3) 50 mM nitroethanol, (4) 50 mM nitropropanol, and (5) 50 mM nitropropionic acid. Optical density values of nitrocompounds were significantly lower than that of control at two, four, and six hours. Plate counts of uric acid–utilizing microorganisms after six-hour incubation exhibited that nitrocompounds greatly reduced the growth of these microorganisms except for the nitroethane (P < 0.05). The nitropropanol and nitropropionic acid treatments showed significantly higher inhibitory effects compared to the nitroethanol. Experiments II and III were conducted to evaluate inhibitory effects of nitrocompounds on growth of uric acid–utilizing microorganisms compared to non-nitrocompounds such as ethanol, propanol, and propionic acid. Experiments II and III consisted of seven treatments: (1) control, (2) nitroethanol, (3) nitropropanol, (4) nitropropionic acid, (5) ethanol, (6) propanol, and (7) propionic acid. The incubation times of Experiments II and III were 6 and 24 h, respectively. The nitrocompounds were significantly more successful in inhibiting growth of uric acid–utilizing microorganisms compared to those non-nitrocompounds. These results suggest that nitrocompounds exhibit potential to reduce ammonia volatilization in poultry manure by inhibiting growth of uric acid–utilizing microorganisms.     

Toxicity of carbaryl,diquat dibromide,and fluoranthene,individually and in mixture,to larval grass shrimp,Palaemonetes pugio

This study examined the toxicity of two pesticides (carbaryl and diquat dibromide) and one polycyclic aromatic hydrocarbon (fluoranthene), both singly and in mixture, to grass shrimp larvae (Palaemonetes pugio). These three chemicals are all present in coastal environments and can easily enter estuarine ecosystems. Fluoranthene was the most toxic chemical with a 96-h LC₅₀ value of 32.45 μ g/L, followed by carbaryl (43.02 μ g/L) and diquat dibromide (1624 μ g/L). In the chemical mixture tests, the binary carbaryl/diquat dibromide mixture and the ternary carbaryl/diquat dibromide/fluoranthene mixture had additive results.