Three-dimensional nickel ion transport through porous media using magnetic resonance imaging

The transport of Ni2+ ions in a column, filled with porous media, was observed in three dimensions and time by magnetic resonance imaging (MRI) in a clinical scanner. For porous media we used glass beads or quartz sand in a saturated continuous flow mode. The magnetic moment of Ni2+ decreased the T1 relaxation time of 1H in aqueous solution. This concentration-dependent effect was used by a fast low angle shot (FLASH) MRI sequence for imaging the concentration of the dissolved ions. Since Ni2+ behaves as a conservative tracer under the chosen conditions, the tracer motion was representative for the water flow in the porous medium. Currently, we can achieve an isotropic spatial resolution of 1.5 mm and a temporal resolution of 170 s. The transport observation gives direct access to hydraulic flow properties of the porous media. The fluid flow velocity field was calculated by a fronttracking method and the statistical properties of the velocities were investigated. We also compared the experimental data with the three-dimensional particle tracking model PARTRACE, which uses the experimental flow field as input.     

Relationships between bacterial tolerance levels and forms of copper and zinc in soils

The effects of various fractions of copper (Cu) and zinc (Zn) on soil bacteria were evaluated by the heavy metal tolerance level of the bacterial community (IC50) in soil samples collected near a mine. The IC50 values had no relationship with the total concentrations of Zn and Cu in the soils, but were weakly correlated with the 0.05 M CaCl2-extractable form of each metal in the soils (Cu: R2 = 0.670, p < 0.01; Zn: R2 = 0.453, p < 0.05). It was found that the IC50 correlated strongly with the total concentration of each metal in the extracts from water-saturated soil samples, described below as "soil solution" (Cu: R2 = 0.789, p < 0.01; Zn: R2 = 0.617, p < 0.01). The speciation of these metals in the soil solutions was estimated using an equilibrium thermodynamic computer model, SOILCHEM. Simulated free Cu ion ranged from 18 to 98% of total Cu, and organic complexes of Cu ranged from < 1 to 56%. In all samples, Zn existing as the free ion was estimated to be more than 80% of total Zn in the soil solutions. The IC50 values were also correlated with the estimated free metal ion activities, but with slightly lower correlation coefficients than found for total concentration in the soil solutions (Cu: R2 = 0.735, p < 0.01; Zn: R2 = 0.610, p < 0.01). The results suggest that not only high metal ion activities, but also total dissolved metal concentrations in soil solutions may affect the bacterial community.     

Point- and nonpoint-source pesticide contamination in the Zwester Ohm catchment, Germany

Reducing pesticide loads in surface waters implies identifying the pathways responsible for the pollution. The current study documents the pesticide contamination of the river Zwester Ohm, a 4917-ha catchment in Germany with 41% of the land used for crop production. Discharges and concentrations of 19 pesticides were measured continuously at three locations for 15 mo. The load detected at the outlet of the catchment amounted to 9048 g a.i. The losses represent 0.22% of the pesticides applied by the farmers. The contamination showed a seasonal pattern following the pesticide application times. The wastewater treatment plant system (WWTPS) in the catchment (two wastewater treatment plants [WWTP], 14 combined sewer overflows (CSO), four CSO tanks) emits during dry weather periods purified sewage and during storm events sewage mixed with stormwater runoff into the river. The contribution by the WWTPS to the pesticide load was defined as point-source pollution (PSP). The load was dominated by PSP with at least 77% of the total pollution. No significant interdependencies between intrinsic properties of the pesticides, hydrometeorological factors, and the loads occurring in the stream could be found. Therefore, it is not possible to predict PSP for other catchments based on the results from this study. Whereas 65% of the total load entered the river via the WWTP, a portion of 12% was attributed to the CSO. The study points out that the influence of CSO on PSP should be taken into account in future catchment studies in areas with comparable agricultural structure.     

Copper and zinc speciation in the solution of a soil-sludge mixture

Only a small fraction of the transition metals content in sludge-amended soils is soluble, and yet this fraction is a major contributor to the mobility and bioavailability of the metals. The chemical species of zinc (Zn) and copper (Cu) in the soluble fractions of soil-sludge mixtures were characterized with respect to their charge, molecular weight, and stoichiometry using ion exchange resin and gel chromatography procedures. The change in the metals' species with time after sludge application was followed for 100 d. Copper in the water extracts of the sludge-sand mixtures was found almost exclusively in low molecular weight (below 1000 Da) complexes. Higher molecular weight (around 2500 Da) dissolved organic carbon (DOC) was present in the extracts as well, but this DOC fraction exhibited little complexation. Copper was present in the extracts mainly as negatively charged species throughout the incubation period, and zinc tended to form zwitter ions. As incubation progressed, the relative content of positively charged Zn in solution increased. Complexation capacity of DOC in sludge water extract, extrapolated to infinite dilution, was 8.75 mM Ca g(-1) DOC. When the complexation capacity of the extract is near saturation, a mean Cu-DOC complex can be defined. It consists of 1.9 Cu atoms attached to DOC species containing 5.6 C atoms. Thus, the organic Cu complexes consist primarily of about two Cu ions attached to DOC species containing only five or six C atoms. Amino acids and small peptides or polycarboxylic acids, such as citric acid, thus may be important complexing agents of the metal.     

Changes in soil quality and below-ground carbon storage with conversion of traditional agricultural crop lands to bioenergy crop production

Berm-isolated (0.5 ha) plots have been used since 1995 to quantify changes in soil and water quality with conversion from agricultural to bioenergy crops. Soil quality improvements, including increases in soil carbon storage, have occurred on sites planted to woody or herbaceous species, and no-till corn compared with tilled corn or cotton. Initial increases in soil carbon occurred within the upper 10 cm of the soil profile. Soil carbon on plantings of switchgrass, no-till corn, and sweetgum with a cover crop between the rows increased over the first 3 years. Soil carbon decreased by 6% on the sweetgum plantings without a cover crop and remained lower through the fifth growing season. Overall, the greatest increases in below ground carbon storage have occurred primarily within the upper 40 cm. Former land use, growth characteristics, management practices, and soil characteristics appear to be the primary factors determining the timing, depth. and extent of changes in soil carbon storage for bioenergy and no-till crops.     

Estimation of 14CO2 flux at soil-atmosphere interface and distribution of 14C in forest ecosystem

To realize the dynamical behavior of 14C among exchangeable carbon reservoirs in terrestrial environment, a method for in situ determination of 14CO2 flux at soil-atmosphere interface and a high flow rate CO2 sampler were developed. This method allowed us to collect integrated quantity of CO2 for determining 14C activity over an extended time period under environmental conditions with minimal site disturbance. The 14CO2 flux from ground surface was estimated to be 1.59 x 10(-5) Bq m (-2) S (-1) in a forest floor with the method. The specific activities of 14C in environmental materials such as some biological and air samples were also determined in the vicinity of the place, where the flux measurement was made, to discuss the behavior of 14C in the forest ecosystem. The results indicated that fresh pine needles had a similar 14C specific activity to the atmospheric CO2 at the same height due to its fairly rapid equilibrium, 14C specific activity in the atmospheric CO2 has a concentration gradient near the ground surface and, at least in this site, CO2 with high 14C specific activity was generated by decomposition of soil organic matter which may be accumulated in soil as a result of former nuclear weapons tests.     

Intercomparison of INAA and ICP-MS results for thorium determination in Pakistani diet

A pilot study on ingestion and organ content of trace elements of importance in radiological protection was to be carried out in Pakistan. Baseline analytical data on daily dietary intake of thorium was to be measured using Instrumental Neutron Activation Analysis (INAA) technique. To determine the accuracy and reliability of our technique, some samples were measured in Pakistan using INAA and in Japan using Inductively Coupled Plasma-Mass Spectrometry. For intercomparison of results overall mean Z-scores were calculated. The results showed validity of our technique. Mean value of 232Th concentration in Pakistani diet samples using INAA technique is 0.0062 +/- 0.0028 microg/g and with ICP-MS technique is 0.0069 +/- 0.0032 microg/g.     

Acidification in developing countries: ecosystem sensitivity and the critical load approach on a global scale

Acidification represents a growing threat to certain developing country ecosystems in tropical and subtropical climates. A methodology investigating the extent of acidification risks from sulfur emissions on a global scale is presented. Atmospheric transfer models have been used to calculate transfer and deposition of sulfur (using emissions for 1990 and a projection for 2050) and alkaline soil dust. A method to derive the relative sensitivity of terrestrial ecosystems is explained and preliminary critical load values are assigned. A range of values for critical loads and base cation deposition have been used to investigate uncertainty in maps depicting the excess of deposition above critical loads. These show an increasing risk of acidification in 2050 in extended regions of southern and eastern Asia, as well as parts of southern Africa, in comparison to 1990. Certain areas, especially in Asia, are shown at risk even when high values of critical load and base cation deposition are used.     

Effects of contamination level of dioxins and related chemicals on thyroid hormone and immune response systems in patients with "Yusho"

Effects of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and coplanar polychlorinated biphenyls (Co-PCBs) on thyroid hormone and immune response systems were examined in 16 Yusho patients at about 30 years after the outbreak of the Yusho accident. Their toxic equivalent (TEQ) levels in the blood were 27.8-1048.5 pg/g fat with the median level of 222.4 pg/g fat, which was about seven times higher than that of healthy Japanese people. Even at such high blood TEQ concentrations, they seemed not to affect the serum levels of thyroid hormones, thyroid stimulating hormone (TSH), immunoglobulins (A, G and M), autoantibodies (antinuclear antibody, rheumatoid and lupus erythematosus (LE) factors), and lymphocyte subsets in the blood. However, positive rates of rheumatoid factor were considered to increase in higher blood TEQ groups. This investigation was done using rather small number of Yusho patients, so further large-scale investigations are needed to get more conclusive findings concerning their effects on thyroid hormone and immune response systems.     

The rate improvement and modeling of trichloroethene photodegradation by acetone sensitizer in surfactant solution

The photodecay of trichloroethene (TCE) in surfactant solution by the help of photosensitizer (acetone, ACE) was investigated and modeled. Apart from the direct photodegradation, photosensitization is presumed to be one of the major mechanisms contributing to overall decay. Quantum yields of TCE photodecay in solution with surfactant Brij 35 and optimal ACE dosage are about 25 times higher than in Brij 35 alone. However, with an excess ACE dosage, ACE will act as a light barrier and attenuate the light intensity available for TCE photodegradation. TCE photodegradation follows a two-stage kinetics, in which a lag phase is followed by a fast decay. Mathematical models were developed for the prediction of the two-stage photodegradation, in which the remaining fraction of TCE (C/C0) in the system becomes predictable.